• Structural Engineering and Mechanics
• /
• 제73권6호
• /
• pp.667-684
• /
• 2020

In this article, the static responses of layered magneto-electro-thermo-elastic (METE) plates in thermal environment have been investigated through FE methods. By using Reddy's third order shear deformation theory (TSDT) in association with the Hamilton's principle, the direct and derived quantities of the coupled system have been obtained. The coupled governing equations of METE plates have been derived through condensation technique. Three layered METE plates composed of piezoelectric and piezomagnetic phases are considered for evaluation. For investigating the correctness and accuracy, the results in this article are validated with previous researches. In addition, a special attention has been paid to evaluate the influence of different electro-magnetic boundary conditions and pyrocoupling on the coupled response of METE plates. Finally, the influence of stacking sequences, magnitude of temperature load and aspect ratio on the coupled static response of METE plates are investigated in detail.

• Advanced Composite Materials
• /
• 제18권2호
• /
• pp.153-166
• /
• 2009

A matrix method for evaluating effective electro-magneto-thermo-elastic properties of a generally anisotropic multilayered composite is presented. Physical variables are categorized into two groups: one that satisfies the continuity across the interface between layers and another that satisfies an average inter-layer compatibility (which is also exact). The coupled electro-magneto-thermo-elastic constitutive equation is accordingly reassembled into submatrices, which leads to the derivation of concise and exact matrix expressions for effective properties of a multilayered composite having the coupled physical effects. Comparing the results for a purely elastic multiplayer with those from other theoretical approaches validates the developed method. Examples are given for a PZT-graphite/epoxy composite and a $BaTiO_3-CoFe_2O_4$ multiplayer which exhibit piezo-thermoelastic and magnetoelectric properties, respectively. The result shows how a strong magnetoelectric effect can be achieved by combining piezoelectric and piezomagnetic materials in a multilayered structure. The magnetoelectric coefficient of the $BaTiO_3-CoFe_2O_4$ multiplayer is compared with those for fibrous and particulate composites fabricated with the same constituents.

• 한국산학기술학회논문지
• /
• 제16권4호
• /
• pp.2407-2414
• /
• 2015

본 논문은 적층된 복합재 라미네이트의 두께방향(out-of-plane) 열탄성 물성치 계산식에 관하여 서술하였다. 다양한 적층패턴을 유도된 계산식에 적용한 결과, 섬유방향이 단방향 0도로 구성된 라미네이트에서 총 플라이수 중 10% 이상이 모두 90도 섬유방향으로 이루어져 있거나, 또는 15도 이상의 섬유방향으로 형성된 적층패턴을 가지는 라미네이트(Laminate)의 두께방향 물성치를 복합재 라미나(lamina)의 단섬유방향과 직교하는 물성치(transverse property)로 가정하는 것은 적절하지 않은 것으로 나타났다.

• Composites Research
• /
• 제15권1호
• /
• pp.41-52
• /
• 2002

이 논문에서는 탄소/탄소 브레이크 제동중 시스템의 거동을 열탄성 해석을 수행하여 살펴보았고. 파손에 안정적인 디스크의 형상을 찾기 위하여 다양한 형상에 대한 3차원 응력해석을 수행하였다. 탄소/탄소 복합재료의 기계적 물성치가 적층면방향과 두께방향으로 측정되었다. 측정긴 기계적 물성치는 열탄성 해석과 3차원 응력해석을 위한 입력으로 사용 되었다. 로터 클립과 클립 리테이너 사이의 간격은 회전판의 하중전달 미케니즘에 있어서 중요만 인자이다. 간격변화는 기계적 변형과 열 변형으로 분리하여 고려하였다. 클립과 리테이터는 서로 접촉이 발생하지 않았으므로 해석 모델에서 리테이너와 리벳은 제외되었다. 로터 디스크는 반복대칭조건을 사용하여 모델링되었고, 로터 디스크와 로터 클립, 로터 클립과 키 드럼사이의 2중 접촉문제가 고려되었다. 3차인 응력해석의 결과로부터 브레이크 디스크의 키 홀 부분에 응력집중현상이 발생하는 것을 확인하였다. 응력분포는 키 홀 부분에서 접촉면의 회전각과 곡률반경의 변화에 따라 연구 되었다.

• Steel and Composite Structures
• /
• 제39권5호
• /
• pp.631-643
• /
• 2021

The aim of this work is to study the hygro-thermo-mechanical bending responses of simply supported FG plate resting on a Winkler-Pasternak elastic foundation. The effect transverse shear strains is taken into account in which the zero transverse shear stress condition on the top and bottom surfaces of the plate is ensured without using any shear correction factors. The developed model contains only four unknowns variable which is reduced compared to other HSDTs models. The material properties of FG-plate are supposed to vary across the thickness of the plate according to power-law mixture. The differential governing equations are derived based on the virtual working principle. Numerical outcomes of bending analysis of FG plates under hygro-thermo-mechanical loads are performed and compared with those available in the literature. The effects of the temperature, moisture concentration, elastic foundation parameters, shear deformation, geometrical parameters, and power-law-index on the dimensionless deflections, axial and transverse shear stresses of the FG-plate are presented and discussed.

• Composites Research
• /
• 제28권5호
• /
• pp.260-264
• /
• 2015

본 논문에서는 CNT강화 에폭시 복합재의 열기계적 거동을 예측하고 그 경향을 분석하기 위해 분자동역학 시뮬레이션을 이용하여 해석을 수행하였다. 에폭시 내부 CNT의 체적비율을 0~25%까지 총 6개의 모형을 구성하였다. 열적 거동을 보기 위해 300~600 K까지 일정하게 온도를 상승시켰으며, 온도와 비체적 관계를 이용하여 유리전이 온도와 열팽창 계수를 산출하였다. 또한 일정 변형도 하중을 통해 탄성 계수를 산출하여 기계적 거동을 예측하였다. 추가적으로 CNT의 표면처리에 따른 기계적 거동을 분석하였다. 질소 도핑 및 COOH, OH 그룹을 처리한 3개의 모형을 구성하였으며, 각 모형의 탄성 계수 및 경계면 거동에 대한 해석을 수행하였다. 이를 통해 에폭시 내부 CNT의 응집은 열기계적 거동에 교란을 가지고 올 수 있으며, 표면처리는 복합재의 기계적 물성뿐만 아니라 경계면 특성까지도 향상시킬 수 있음을 확인하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.210-212
• /
• 2003

Finite element analysis of welding processes, which entail phase evolution, heat transfer and deformation, is considered in this paper. Attention focuses on numerical implementation of the thermo-elastic-plastic constitutive equation proposed by Leblond et al in consideration of the transformation plasticity. Based upon the multiplicative decomposition of deformation gradient, hyperelastic formulation is employed for efficient numerical integration, and the algorithmic consistent moduli for elastic-plastic deformations including transformation plasticity are obtained in the closed form. The convergence behavior of the present implementation is demonstrated via a couple of numerical example.

• Structural Engineering and Mechanics
• /
• 제63권3호
• /
• pp.401-415
• /
• 2017

In this article, hygro-thermo-mechanical vibration and buckling of exponentially graded (EG) nanoplates resting on two-parameter Pasternak foundations are studied using the four-unknown shear deformation plate theory. The material properties are presumed to change only in the thickness direction of the EG nanoplate according to two exponential laws distribution. The boundary conditions of the nanoplate may be simply supported, clamped, free or combination of them. To consider the small scale effect on forced frequencies and buckling, Eringen's differential form of nonlocal elasticity theory is employed. The accuracy of the present study is investigated considering the available solutions in literature. A detailed analysis is executed to study the influences of the plate aspect ratio, side-to-thickness ratio, temperature rise, moisture concentration and volume fraction distributions on the vibration and buckling of the nanoplates.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1436-1438
• /
• 2003

In this paper thermal and mechanical properties of elastic epoxy for applying high voltage products were investigated. Glass transition temperature(Tg) of elastic epoxies can't find form room temperature to $200^{\circ}$ by DSC. It occurred weight reduce on $285^{\circ}$ and $451^{\circ}$ by thermo-gravimeter. The first temperature was effected on addictives and the other was epoxy's character. Max, tensile strain showed $28.3kgf/cm^2$ at 20% of mechanical stress in addictives 35phr. SEM micrograph of the fracture surface observed in void and tearing of elastic epoxy at addictives 35phr. The other side, SEM micrograph of rigid epoxy showed the trace which broke.

• Computers and Concrete
• /
• 제22권6호
• /
• pp.501-514
• /
• 2018

The paper presents the thermo-mechanically induced non-linear response of multiwall carbon nanotube reinforced laminated composite beam (MWCNTRCB) supported by elastic foundation using higher order shear deformation theory and von-Karman non-linear kinematics. The elastic properties of MWCNT reinforced composites are evaluated using Halpin-Tsai model by considering MWCNT reinforced polymer matrix as new matrix by dispersing in it and then reinforced with E-glass fiber in an orthotropic manner. The laminated beam is supported by Pasternak elastic foundation with Winkler cubic nonlinearity. A generalized static analysis is formulated using finite element method (FEM) through principle of minimum potential energy approach.