• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.291-295
• /
• 2011

복사냉각 방식의 연소기 노즐확장부의 열/구조적인 안정성을 평가하기 위하여 열/구조해석을 수행하였다. 노즐확장부에 적용된 재료는 초내열합금인 니오븀 합금을 사용하였다. 노즐확장부는 확대노즐부에 비하여 팽창비가 크기 때문에 구조물의 사이즈가 연소실이나 확대노즐부에 비하여 상대적으로 크다. 이러한 이유 때문에 노즐확장부의 두께를 최소화 하는 것이 중요하다. 이를 위하여 구조물의 두께를 1.0 mm에서 0.4 mm까지 감소시켜 두께의 변화에 따른 열/구조적인 안정성을 평가하였다. 구조해석결과 0.4 mm 두께의 노즐확장부도 열/구조적으로 안정하게 작동할 수 있음을 보여주었다. 실제 연소기가 작동할 때 발생되는 진동에 의한 영향은 추후에 추가적으로 고려할 예정이다.

• 한국방재학회 논문집
• /
• 제11권2호
• /
• pp.45-52
• /
• 2011

고강도 콘크리트의 폭렬현상을 억제하여 내화 성능을 개선하기 위한 방법으로 고온에서 수증기가 콘크리트 표면으로 이동할 수 있도록 경로를 제공하여 주는 섬유를 혼입하는 방안이 있다. 본 연구에서는 섬유혼입 고강도 콘크리트 기둥에 대한 재하 내화 실험을 수행하였고, 내부 철근의 온도분포 예측을 위한 열전달 모델과 고온에서 콘크리트 기둥의 역학적 거동에 대한 재료모델을 제시하였다. 화재 시 콘크리트 내부의 물리적인 현상과 콘크리트의 열적 특성을 고려하여 선행 연구의 재료모델을 수정하였다. 수정한 모델을 이용한 섬유혼입 고강도 콘크리트의 유한요소 해석을 실행하였고, 재하 내화실험과의 비교를 통하여 재료모델을 제안하였다.

• Corrosion Science and Technology
• /
• 제12권5호
• /
• pp.253-258
• /
• 2013

Effects of copper hydroxide(II) on the curing and the corrosion resistance of electrocoating were investigated by MEK rubbing test, electrochemical impedance spectroscopy (EIS) and Thermo-gravimetric analysis (TGA). Curing performance of electrocoating was lowered with increasing the content of copper hydroxide(II) as evidenced by the MEK rub performance which decreased with increasing the content of copper hydroxide(II). This indicates copper hydroxide(II) affected the blocked isocyanate reaction in the coatings, by the decomposition of copper hydroxide(II) to CuO and $H_2O$ during reaction of isocyanate with nuclephiles. Corrosion resistance of coatings also decreased with the content of copper hydroxide. This reflects the higher barrier property in coatings with higher curing performance.

• 한국군사과학기술학회지
• /
• 제6권4호
• /
• pp.113-123
• /
• 2003

Both numerical analysis and experiment of cold and hot tests were performed to obtain basic design data for the swirl coaxial type Injector and to predict the combustion performance. Mass distribution, mixing distribution, mixing efficiency, characteristic velocity efficiency were measured by the cold tests and numerical analysis using the commercial thermo-hydraulic program. Test and analysis variables were recess, pressure drop, velocity ratio, mixing spray, mixture ratio. Hot tests were performed for the Uni-element injector to compare the performance with the cold test results, and, hot tests for Multi-element injector were performed to compare the performance with Uni-element injector. Designed thrust of the Uni-element injector liquid rocket was 35kgf at sea level and combustion chamber pressure, 20bar. Kerosene and Lox were used as a propellant.

• 항공우주시스템공학회지
• /
• 제15권6호
• /
• pp.1-9
• /
• 2021

In this study, a new design of an extension-type actuator (ExACT) is proposed based on a chevron structure with displacement amplification mechanisms by local heating. ExACT comprises diamond-shaped displacement amplification structures (DASs) containing axially oriented V-shaped chevron beams, a support bar that restricts lateral heat deformation, and a loading slot for thin-film heaters. On heating the thin film heater, the diamond-shaped DASs undergo thermal expansion. However, lateral expansion is restricted by the support bar, leading to displacement amplification in the axial direction. The performance parameters of ExACT such as temperature distribution and extended displacement is calculated using thermo-mechanical analysis methods with the finite element method (FEM) tool. Subsequently, the ExACTs are fabricated using a polymer-based 3D printer capable of reproducing complex structures, and the performance of ExACTs is evaluated under various temperature conditions. Finally, the performance evaluation results were compared with those of the FEM analysis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.175-178
• /
• 2001

In a clothes dryer, various thermo-fluid flow phenomena occur such as the heat and mass transfer in the process of removing moisture from clothes, the flow field generated by the fan, and the various flow characteristics from the complex flow paths. The study and understanding of such phenomena is an important factor in increasing the performance of dryers. In this study, as part of a dryer research, the flow field inside a vented dryer was measured using PIV, which the result will be used as the basic material in analyzing the various flow phenomena.

• 한국군사과학기술학회지
• /
• 제5권4호
• /
• pp.49-56
• /
• 2002

For the purpose of the increase in the performance and thermal stability of PBX's, the mixed formal consisting of BDNPF, DNPBF and BDNBF were synthesized. In order to find out the optimal condition for the synthesis of energetic plasticizer, BDNPF, DNPBF and BDNBF, the synthetic procedures have been investigated. We synthesized DNP-OH and DNB-OH through oxidative nitration and controlled various composition of mixed formal by $H_{2}SO_{4}$ and s-trioxane to investigate optimal composition, and then characterized its thermo-physical properties.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2004년도 동계학술대회 논문집
• /
• pp.96-96
• /
• 2004

• International Journal of Control, Automation, and Systems
• /
• 제1권4호
• /
• pp.511-514
• /
• 2003

The Infrared Camera usually detects only Infrared waves emitted from the light in order to illustrate the temperature distribution. An Infrared diagnosis system can be applied to various fields. But the defect discrimination can be automatic or mechanized in the special shoes total inspection system. This study introduces a method for special shoes nondestructive total inspection. Performance of the proposed method is shown through thermo-Image.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 하계학술발표회
• /
• pp.114-115
• /
• 2003

최근 급속히 성장하고 있는 Wavelength-division-multiplexing (WDM) 시스템에 파장가변 필터는 핵심적인 소자로 적용될 수 있으며, 높은 가격 경쟁력과 광학 필터로서 좋은 특성과 높은 가변 특성을 구현할 수 있다. 이러한 파장가변 필터는 multi-beam 간섭을 이용하고, Micro electro mechanical systems (MEMS) 공정 기술인 벌크 마이크로 머시닝 기술을 이용하여 구현되어지고 있다. 또한 파장 가변 필터는 Optical-performance monitoring, Spectrometer, Optical noise filter, Sensor 등 여러 분야에 응용될 수 있다. (중략)