• 한국정보전자통신기술학회논문지
• /
• 제16권5호
• /
• pp.217-222
• /
• 2023

본 논문은 제조공정이 단순하고, 공정시간도 매우 짧아 제조원가를 절감할 수 있는 고분자 유기하드마스크를 합성하는데 목적을 두었다. 승화 정제 장치를 통한 잔류금속을 측정한 결과, 9-Naphthalen-1-ylcarbazole(9-NC)은 4th zone에서 101.75ppb, 2-Naphthol(2-NA)은 5th zone에서 306.98ppb, 9-Fluorenone(9-F)는 4th zone에서 5th zone 사이에서 129.05ppb로 측정되었다. 그리고 합성된 유기하드마스크를 필터 시스템을 거친 후 잔류금속을 측정한 결과 9 ~ 7ppb 측정되었다. 또 열분석 변화를 측정한 결과, 2.78%로 감소하였고 분자량은 942로 측정되었고 탄소 함량은 89.74%이고 수율은 72.4%로 나타났다. 에칭 속도는 평균 18.22Å/s로 측정되었고 코팅 두께 편차는 평균 1.19로 측정되었다. 유기하드마스크의 입자크기가 0.2㎛ 이하에서는 입자가 존재하지 않았다. 코팅 속도를 1,000, 1,500, 1,800rpm으로 변화를 주어 코팅 두께를 측정한 결과, 수축률은 17.9에서 20.8%까지 측정되었고 코팅 결과 SiON과 접착력이 우수하고 유기하드마스크가 균일하게 도포되었음을 알 수 있었다.

• 한국지열·수열에너지학회논문집
• /
• 제19권3호
• /
• pp.1-13
• /
• 2023

Hydronic heated road pavement (HHP) systems have been well established and documented to provide road safety in winter season over the past two decades. However, most of the systems run on asphalt, only a few are tested with concrete, and there rarely is a comparison between those two common road materials in their performance. The aim of this study is to investigate the thermal performance of the concrete HHP systems, including surface temperature variations of experimental pavements in winter season. For preliminary study a small-scale experimental system was installed to evaluate the heat transfer characteristics of the concrete HHP in the test field. The system consists of 3 concrete slabs made of 1 m in width, 1 m in length, and 0.25 m in height. In these slabs, circulating water piping was embedded with different pipe depths of 0.08 m (Case A), 0.12 m (Case B), and 0.20 m (Case C) and same horizontal space of 0.16 m. Heating performance in winter season was tested with different inlet temperatures of 25℃, 30℃, 35℃ and 40℃ during the entire measurement period. Overall, the surface temperature of the concrete HHPs remained above 3℃ in all experimental conditions applied in this study. The results of the surface temperature measurement with respect to the pipe depth showed that Case B was the highest among the three cases. However, the closer the circulating water pipe was to the pavement surface, the greater the heat exchange rate. This results is considered that the heat is continuously accumulated inside the pavements and then the temperature inside the pavements increases, while the amount of heat dissipation decreases as the temperature difference between the inlet and outlet of circulating water decreases. In this preliminary test the applicability of the concrete HHP on road deicing was confirmed. Finally, the results can be used as a basis for studying the effects of various variables on road pavements through numerical analysis and for conducting large-scale empirical experiments.

• 한국안전학회지
• /
• 제38권5호
• /
• pp.8-14
• /
• 2023

Lithium ions can induce the thermal runaway phenomenon and lead to reignition due to electrical, mechanical, and environmental factors such as high temperature, smoke generation, explosions, or flames, which is extremely likely to create safety concerns. Therefore, one of the ways to improve the flame retardancy of the electrolyte is to use a flame-retardant additive. Comparing the associated characteristic value of existing substances with the required experimental value, it was found that these values were either considerably different or were not documented. It is vital to know a substance's combustion characteristic values, flash point, explosion limit, and autoignition temperature (AIT) as well as its combustion characteristics before using it. In this research, the flash point and AIT of materials were measured by mixing a highly volatile and flammable substance, diethyl carbonate (DEC), with flame-retardant dimethyl methylphosphonate (DMMP). The flash point of DEC, which is a pure substance, was 29℃, and that for DMMP was 65℃. Further, the lower explosion limit calculated using the measured flash point of DEC was 1.79 Vol.%, while that for DMMP was 0.79 Vol.%. The AIT was 410℃ and 390℃ for DEC and DMMP, respectively. In particular, since the AIT of DMMP has not been discussed in any previous study, it is necessary to ensure safety through experimental values. In this study, the experimental and regression analysis revealed that the average absolute deviation (ADD) for the flash point of the DEC+DMMP DEC+DMMP system is 0.58 sec and that the flash point tends to increase according to changes in the composition employed. It also revealed that the AAD for the AIT of the mixture was 3.17 sec and that the AIT tended to decrease and then increase based on changes in the composition.

• Korean Journal of Radiology
• /
• 제23권1호
• /
• pp.42-51
• /
• 2022

Objective: This study aimed to investigate the direction of tissue contraction after microwave ablation in ex vivo bovine liver models. Materials and Methods: Ablation procedures were conducted in a total of 90 sites in ex vivo bovine liver models, including the surface (n = 60) and parenchyma (n = 30), to examine the direction of contraction of the tissue in the peripheral and central regions from the microwave antenna. Three commercially available 2.45-GHz microwave systems (Emprint, Neuwave, and Surblate) were used. For surface ablation, the lengths of two overlapped square markers were measured after 2.5- and 5-minutes ablations (n = 10 ablations for each system for each ablation time). For parenchyma ablation, seven predetermined distances between the markers were measured on the cutting plane after 5- and 10-minutes ablations (n = 5 ablations for each system for each ablation time). The contraction in the radial and longitudinal directions and the sphericity index (SI) of the ablation zones were compared between the three systems using analysis of variance. Results: In the surface ablation experiment, the mean longitudinal contraction ratio and SI from a 5-minutes ablation using the Emprint, Neuwave, and Surblate systems were 28.92% and 1.04, 20.10% and 0.53, and 24.90% and 0.45, respectively (p < 0.001). A positive correlation between longitudinal contraction and SI was noted, and a similar radial contraction was observed. In the parenchyma ablation experiment, the mean longitudinal contraction ratio and SI from a 10-minutes ablation using the three pieces of equipment were 38.60% and 1.06, 32.45% and 0.61, and 28.50% and 0.50, respectively (p < 0.001). There was a significant difference in the longitudinal contraction properties, whereas there was no significant difference in the radial contraction properties. Conclusion: The degree of longitudinal contraction showed significant differences depending on the microwave ablation equipment, which may affect the SI of the ablation zone.

• Journal of Acupuncture Research
• /
• 제24권3호
• /
• pp.215-229
• /
• 2007

Objectives : Placebo phenomena have been considered as a confounding factor of clinical trial. Expectancy and belief of acupuncture have not been evaluated quantitatively. The present study was performed to analyze the emotional and cognitive factor .of acupuncture and investigate whether the expectancy of acupuncture treatment is associated with the cognition of acupuncture. Methods : The expectancy and the perception of bodily sensation (PBS) of 22 participants were assessed using self-reported questionnaire. The subjects used the self assessment manikin (SAM) to rate each of the standard affective image of the international affective picture system (lAPS) and other acupuncture-related image. Based on the degree of expectancy, the high expectant (HE) and the low expectant (LE) group were classified. The thermal and pressure pain threshold was objectively evaluated using radiant-heat device and algometer. The degree of expected pain of acupuncture and the actual pain of painful stimulation was subjectively evaluated using facial pain scales (FPS). Results : Using SAlVI analysis, we identified the negative correlation between hedonic valence and arousal dimension on acupuncture-related visual cue. The degree of the PBS and general pain threshold did not show any significant difference between the HE and the LE group. The HE group rated the acupuncture images as more pleasant, more arousing, than the LE group. In addition, we also found that the higher expectancy marked the lower FPS of the expected pain of acupuncture, but not of the actual pain of painful stimulation. Conclusions : Our preliminary study identified the psychological dimensions of acupuncture-related visual cue. These findings indicate that the expectancy of acupuncture could affect the cognition of acupuncture.

• 대한환경공학회지
• /
• 제22권10호
• /
• pp.1809-1816
• /
• 2000

본 연구는 상압유통식 반응장치를 이용하여 석유화학공단에서 주로 발생되는 휘발성 유기화합물(volatile organic compound: VOC) 인 methanol의 연소에 대한 다양한 금속-프탈로시아닌의 촉매활성에 관하여 연구하였다. Co-PC의 촉매활성은 air+methanol의 혼합물을 이용하여 전처리한 경우가 air만으로 전처리한 경우보다 더 높았으며, 금속-PC의 촉매활성은 metal free-PC < Zn-PC < Fe-PC < Cu($\alpha$)-PC < Co-PC의 순서 였다. TG/DTA 분석 결과, 금속-PC 의 열분해 용이 성은 metal free-PC < Zn-PC < Cu($\alpha$)-PC < Co-PC < Fe-PC의 순서로 나타었으며, 금속과 프탈로시아닌의 결합특성에 따른 차이로 판단된다. XRD 및 EA 분석결과, 전처리한 후의 Zn-PCS와 metal free-PC는 원래의 결정구조가 거의 유지되었지만, Co-PC, Cu($\alpha$)PC 및 Fe-PC는 원래의 결정구조가 파괴되는 것으로 나타났다. 전처리한 후의 Co-PC는 금속산화물인 $Co_3O_4$의 형태로 존재하였으며, Co-PC의 촉매활성이 가장 우수하였다. Co-PC 상에서 methanol의 촉매연소는 반응물의 농도가 높거나 접촉시간(W/F)이 짧을 경우, 중간생성물로서 HCHO 및 $HCOOCH_3$가 관찰되었다.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.629-635
• /
• 2019

자주포는 운용 특성상 정차상태에서 구동하기 때문에 엔진을 사용할 만큼 많은 에너지가 필요하지 않다. 이와 같은 문제점을 보완하기 위하여 성능개량된 자주포에는 보조동력장치(APU)를 설치하였다. APU를 통하여 엔진의 불필요한 가동을 줄일 수 있고, 이는 엔진의 수명을 늘릴 수 있다. 본 연구에서는 APU 내부 엔진룸의 열 유동을 최적화하기 위하여 Fan과 오일쿨러 적용에 따른 영향을 분석하였다. 열유동 해석을 수행하기 위하여 대기환경과 일사량은 MIL-STD-810을 적용하였다. 흡입구/배출구 Fan을 적용한 경우(Case1), 흡입구 Fan과 오일쿨러를 적용한 경우(Case2), 흡입구/배출구 Fan과 오일쿨러를 적용한 경우(Case3) 3가지에 대하여 열유동을 해석하였다. 해석결과 Case3의 실린더 헤드 온도가 Case1 보다 21.4℃, Case2 보다 8.0℃ 낮은 것을 확인하였다. 해석결과에 대한 타당성을 검토하기 위하여 동일 외기조건에서 실험을 진행하였다. 해석수치와 실험결과가 7%이하의 차이를 나타냈다. 이를 통하여 APU 열유동 최적화 모델이 설계조건을 만족하는 것을 확인하였다. 본 연구결과를 통하여 추후 개발하는 타 군용 APU 열유동 최적화에 대한 기초자료로 사용될 것으로 기대된다.

• Journal of Preventive Medicine and Public Health
• /
• 제22권1호
• /
• pp.136-145
• /
• 1989

This study made a descriptive analysis of the cumulative amount and rate of sports medical care utilization during the 24th Seoul Olympic Games by the participating athletes, officials, etc. The sports medical care utilization was a component of the total medical care use and was basically caused by the prevention and treatment of sports injuries. The analytic data were derived from the Olympic Health Management Information System(OHMIS) of the SLOOC and the Korea Athlete Trainer Association(KATA). These were analyzed according to the quantity of physician visits and the utilization rate, which was the amount of utilization divided by the total number of participating persons. The results were as follows: Firstly, the sports medical care utilization by the persons participating in the Seoul Olympics amounted to 17.9% of the total medical care utilization. The venue medical services utilization accounted for 54.7% of the total physician visits, which was larger than the village medical center's utilization. The number of physician visits per hundred persons during the 2 week period in the venue clinic was 3.03 and that of the village medical center was 2.51, therefore, the total was 5.54. Secondly, athletes accounted for 82.3% and officials 12.2% in the sports medical care utilization by participants. These results were because athletes, who were directly related to the games, called extremely often on the physicians. The utilization rate of sports medical care by athletes was 34.29. Thirdly, the sports medical demand according to type of therapy could be ranked from high to low in the following order: sports massage, thermal therapy, and electrical stimulation treatment, etc. The department of physical therapy in the village medical center was used a great deal. Fourthly, the trend of daily sports medical care utilization by the athletes showed a bell shape centering around the opening day of the Seoul Olympic Games. The utilization rate of athletes was 2.3; however, that of officials was 0.6. Lastly, the sports medical demand was calculated according to the continents, and Central America, Africa and Middle-East Asia proved to have a higher rate of sports medical care utilization than the more powerful and industrialized continent or regions.

• 환경영향평가
• /
• 제26권6호
• /
• pp.563-573
• /
• 2017

매년 화력발전소에서 약 800톤이상 되는 석탄재가 발생되고 있다. 발생되는 석탄재 중 재활용되고 남은 석탄재는 회처리장에 매립되고 있다. 현재 회처리장 용량에는 한계가 있고, 석탄재 매립으로 인한 환경영향의 우려로 회처리장 신규 확보도 어려운 상황이다. 환경영향 최소화라는 측면에서 석탄재 재활용 및 유효이용이 향후 장기적 국가적으로 시급하게 해결해야 할 문제로 인식되고 있다. 따라서, 본 연구는 국내 석탄재 재활용 확대를 가로막고 있는 문제점을 분석하여 해외 사례를 바탕으로 친환경적 국토관리와 자원순환사회를 위한 석탄재 재활용 확대 방안을 제안 하고자 하였다. 국내 석탄재 재활용 확대 방안은 다음과 같다. 첫째, 석탄재를 재활용 할 수 있는 법적 근거를 마련하는 것이다. 이를 위해서는 환경성 예측 평가에 대한 기법과 기준 및 체계 개발이 필요하다. 둘째, 이해관계자들의 인식 전환을 유도하는 것이다. 석탄재의 환경 안전성에 대한 연구 및 홍보가 필요하며 이해관계자들의 적극적인 의사소통 및 정보 제공이 필요하다. 셋째, 석탄재 재활용을 활성화 할 수 있는 실제적인 지원방안이 필요하다. 정책방안으로는 석탄재 처리비 지원, 석탄재 공급센터 설치 등이 있다.

• 해양환경안전학회지
• /
• 제20권3호
• /
• pp.304-311
• /
• 2014

In this study, to apply hydrogen energy to ship engine and to generate effective hydrogen production, we investigated the effects of high temperature $H_2SO_4$ feed rate and cooling water rate to pump parts with fixed frequency needed to reciprocate motion and a simulation was conducted at each condition. In the fixed frequency and cooling water inlet flow rate of 0.5 Hz and 3.9 kg/s, we changed the high temperature $H_2SO_4$ flow rate to 47.46 kg/s (it is 105 % of 45.2 kg/s), 49.72 kg/s (110 %), and 51.98 kg/s (115 %). Also, at 0.5 Hz and 45.2 kg/s of frequency and high temperature $H_2SO_4$ flow, the thermal hydraulic analysis was performed at the condition of 95 % (3.705 kg/s), 90 % (3.51 kg/s), and 85 % (3.315 kg/s). In overall simulation cases, the physical properties of materials are more influential to the temperature increase in the pump part rather than the changes on the feed rate of high temperature $H_2SO_4$ and cooling water. A continuous operation of pump was also capable even if the excess feed of high temperature $H_2SO_4$ of about 15 % or the less feed of cooling water of about 15 % were performed, respectively. When the increasing feed of high temperature $H_2SO_4$ of up to 5 %, 10 %, and 15 % were compared with base flow (45.2 kg/s), the deviation of time period rose to a certain temperature and ranged from 0 to 4.5 s in the same position (same material). In case of cooling water, the deviation of time period rose to a certain temperature and ranged from 0 to 5.9 s according to the decreasing feed changes of cooling water at 5 %, 10 %, and 15 % compared to a base flow (3.9 kg/s). Finally, the additional researches related to the two different materials (Teflon and STS for Pitch and End-plate), which are concerned about the effects of temperature changes to the parts contacting different materials, are needed, and we have a plan to conduct a follow-up study.