• 한국수소및신에너지학회논문집
• /
• 제30권4호
• /
• pp.376-383
• /
• 2019

This paper presents of thermal performance analysis by using mathematical models for a compound parabolic collector (CPC) system employing heat storage tank. The thermal performance including insolation energy, heat loss from collector system, useful energy, collector efficiency, and temperature of storage tank were theoretically investigated through a year using monthly-average meteorological data at Seoul. The simulated results showed that the CPC systems are suitable for the applications of higher temperature than flat plate collector (FPC) systems.

• 태양에너지
• /
• 제18권1호
• /
• pp.99-109
• /
• 1998

공기조화 설비에 있어서 시스템의 성능을 향상시키고 에너지의 유효이용 및 경제성을 높일 수 있는 빙축열 시스템에 대한 연구이다. Ice Ball을 내장한 빙축열조를 횡형 사각형과 입형 원통형 축열조에 대하여 조내로 유입하는 브라인의 유량(2, 4, 6LPM)과 온도(-3, -5, $-7^{\circ}C$)를 변화시키고, 또한 유입 브라인의 유동을 상 하향유동으로 하면서 빙축열조내의 온도분포를 파악하여 열유동 특성 및 빙충전율에 대하여 고찰하였다. 연구결과 빙축열조내 열성층을 향상시키기 위해서는 조내 유입 브라인의 유동이 상향 압출흐름이어야 한다는 것을 알았다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.268-273
• /
• 2001

A fundamental study on the harvest-type ice storage system applied ice making method in-water and its temperature characteristics in ice storage system was performed experimentally of the charge and discharge of cold. This paper is concerned with the development of a new method for making and separating ice and saving floated ice by installing an evaporation plate at in-water within a storage tank. In a conventional harvest-type ice storage system, a tank saves ice by separating a formed ice from an installed evaporation plate, which is located above an ice storage tank as an ice storage system. A new harvest-type method shows very good heat transfer efficiency than a convectional method. It is because the evaporation panel is directly contacted with water in a storage tank. Also, at a conventional system a circulating pump, a circulating water distributor and a piping are installed, but these components are not necessary in a new method. In this study two kinds of ice storage systems are experimentally investigated to study the thermal characteristics of ice storage tanks.

• 태양에너지
• /
• 제17권3호
• /
• pp.13-21
• /
• 1997

장기 성층 온수 저장조 내의 중간 경계면에서 전달되는 열량을 예측하기 위하여 이론식을 유도 확립하고 이론적인 축열효율을 구하였다. 그리고 이론 축열효율값과 비교 고찰하기 위하여 여러 실험 조건을 통한 실제 축열효율을 구하였고, 저장조 내의 중간 경계면에서 일어나는 혼합정도를 효과적으로 해석하기 위하여 유효 열확산 계수를 정량화하였다. 중간 경계면에서 열전도에 의한 손실이 일회 충수 시간이 짧을수록 즉, Pe 수가 증가할 수록 많이 발생함을 알았다.

• 설비공학논문집
• /
• 제12권4호
• /
• pp.337-344
• /
• 2000

The present study describes a one-dimensional modeling of encapsulated ice storage tanks. The thermal transmittance of capsules in this model uses the results from the Arnold's experimental $study^{(2-3)}$.In this model, ice storage tank is partitioned by several control volumes for the analysis, each having same number of capsules. The model is validated by the comparison of the measured data from an ice storage tank installed at a building with the capacity of 1200 ton-hrs and the simulated results with the same inlet brine temperature conditions into the tank.

• 태양에너지
• /
• 제5권2호
• /
• pp.35-45
• /
• 1985

A solar hot water storage tank was designed and constructed to examine the heat exchange performances on load side for the solar thermal storage in a single loop solar water heating system. In the tank helically coiled tube was immersed. The hot water was circulated from either top or bottom. The circulation flow rate was varied from 500 ml/min to 20,000 ml/min. The effect of flow rate was observed. The thermal performances according to the flow rate and flow direction were examined. The temperature distributions in the tank and inside of the tubes were plotted along the process of cooling.

• 설비공학논문집
• /
• 제26권7호
• /
• pp.322-328
• /
• 2014

Return piping is used in a solar combi-system for heating and hot water supply. When the temperature of the lower side of a storage tank is low due to hot water usage, the returned hot water after heating is mixed with the lower side cold water of the tank, and the useful energy is reduced. We studied the degree of thermal stratification in the tank, using either a diffuser or a manifold to prevent mixing. Using the diffuser, mixing starts from the bottom of the storage tank. On the other hand, the manifold has the marked effect of preventing mixing. As a result of experiments with changing the diameter and number of holes in the manifold, the optimum condition is 8.5 mm diameter and 96 holes, under the condition of 0.3 lpm.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제2권1호
• /
• pp.65-72
• /
• 2014

본 연구에서는 지역난방 공사에서 사용하고 있는 성층 축열조의 불가용 에너지를 줄이기 위해 단열층을 설계하였다. 단열층은 추가적인 장치 없이 고온수와 저온수의 밀도차이로 생기는 부력으로 운용된다. 축열조의 내부 온도분포를 모사할 수 있는 해석모델을 Matlab Simulink 를 이용하여 제작하고 해석 결과를 이용하여 단열층의 소재와 두께를 결정하였다. 또한 축열조의 축소실험을 통하여 단열층의 운용 가능성을 확인하였다. 실험 결과, 단열층이 축열 방열과정에서 고온수와 저온수의 혼합과 열전도로 인한 온도 경계층형성을 효과적으로 억제할 수 있다는 것을 확인하였다. 단열층을 설치한 축소실험에서는 단열층이 없는 축열조보다 약 1540 J 의 추가 가용에너지가 보존되었고 이를 실제 축열조에 적용할 경우 약 6%의 축열효율이 증가될 것으로 예상된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.108-113
• /
• 2004

Korea Gas Corp. has developed the design technology of the LNG storage tank. The membrane to be applied inside of the LNG storage tank is provided with corrugations to absorb thermal contraction and expansion caused by LNG temperature changes. It is very important to measure their thermal strains under LNG temperatures by analytical and experimental stress analysis of the membrane. We have developed a stress measurement system using strain gages and measured the strain during cooldown and storing the LNG. We also analyzed the measured data by comparison with the FEM data. On the basis of these results, we could design and assure the application of the Kogas Membrane to large scale LNG storage.

• 한국태양에너지학회 논문집
• /
• 제27권3호
• /
• pp.45-54
• /
• 2007

For a conventional natural-circulation type solar water heater, the pressure head is limited by the height between the storage tank and hot water tap. Therefore, it is difficult to provide sufficient hot water flow rate for general usage. This study deals with a design modification of the storage tank to utilize the tap-water pressure to increase hot-water supply Based on fluid dynamic and heat transfer theories, a series of modeling and simulation is conducted to achieve practical design requirements. An experimental setup is built and tested and the results are compared with theoretical simulation model. The storage tank capacity is 240 l and the outer diameter of piping was 15 mm. Number of tube turns tested are 5, 10, and 15. Starting with initial storage tank temperature of $80^{\circ}C$, the temperature variation of the supply hot water is investigated against time, while maintaining minimum flow rate of 10 1/min. Typical results show that the hot water supply of minimum $30^{\circ}C$ can be maintained for 34 min with tap-water supply pressure of 2.5 atm, The relative errors between modeling and experiments coincide well within 10% in most cases.