압축강도 50 MPa이상의 압출성형 시멘트 패널은 고온고압 증기양생으로 생산된다. 고온고압 증기양생에서 요구 강도를 얻기 위해서는 시멘트에 포함되어 있는 CaO와의 반응에 필요한 적정량의 $SiO_2$를 공급하는 것이 관건이다. $SiO_2$의 공급원으로 가장 널리 사용되는 원료는 규석분인데, 이는 환경파괴를 전제로 하기 때문에 친환경적인 제품 생산을 위하여 본 연구에서는 규석분을 대신하여 폐석분을 활용한 시멘트 2차 제품을 생산하고 이에 대한 압출성과 물리적인 특성비교를 실시하였다. 이를 위하여 화성 석산에서 채취한 폐석분을 건조 파쇄한 후 이를 규석분 사용량의 최대 50%까지 치환하여 압출성 및 물리적 특성 실험을 수행하였다. 실험결과 평균 입경은 폐석분과 규석분의 크기가 유사하였으나 물리적 특성은 규석분을 폐석분으로 단순 치환하였을 경우, 대부분 낮게 발현되었다. 따라서 폐석분을 활용할 경우 수화활성을 위한 첨가제 등의 활용이 필요할 것으로 판단된다.
본 연구에서는 pilot scale에서 과열증기를 이용하여 실대재 낙엽송 생재 각재를 열처리하고, 열처리된 낙엽송재의 다양한 물리 역학적 성능과 내후성능을 측정하였다. 또한, 이를 고온 열기 열처리한 낙엽송재의 물성과 비교하였다. 생재로부터 할렬 발생이 억제된 상태로 과열증기 열처리된 낙엽송재의 갈색부후균과 백색부후균에 대한 저항성과 종압축강도는 증가한 반면에 밀도와 평형함수율 및 수축률과 휨강도는 관행 열처리재보다 낮게 측정되었다. 과열증기 목재 열처리는 다량의 수분에 의해 열전달이 빠르고 열가수분해가 촉진되기 때문에 유사한 시간과 온도에서 열기를 이용하여 관행 열처리한 경우보다 열처리 효과가 높게 나타났다. 따라서 과열증기 열처리 방법은 생재를 할렬 없이 열처리할 수 있으며, 관행 열처리 방법보다 낮은 온도 또는 짧은 열처리 시간으로도 동일한 열처리 효과를 발현시킬 수 있다. 즉, 열처리에 소요되는 시간과 에너지를 줄일 수 있다.
SPS법에 의해 제조된 단상의 HAp, HAp-Ag 및 HAp-ZrO$_2$복합 소결체의 미세조직과 기계적 특성을 XRD, SEM, TEM에 의해 조사되었다. 나노크기의 HAp 분말은 Ca(No$_3$)$_2$$.$4$H_2O$과(NH$_4$)HPO$_4$용액을 하여 침전법에 의해 성공적으로 합성되었다. HAp-Ag 복합체에 존재하는 마이크론 크기의 Ag 입자와 HAp 계면에서는 두 상의 열평창계수의 차이로 인하여 수축공의 결함이 관찰되었다. 그러나 나노크기의 Ag의 경우 계면에서의 결함은 관찰되지 않았다. HAp-ZrO$_2$ 복합체의 경우 나노크기의 ZrO$_2$입자들은 HAp 상의 결정립계에 대부분 분산되었다. HAp-Ag 및 HAp-ZrO$_2$ 복합체의 상대밀도와 파괴인성은 각각 HAp 기지에 분산된 미분의 Ag 및 ZrO$_2$상의 소성변형 및 상변태 인성기구에 의해 증가하였다.
석탄 연소 시 발생하는 회가 보일러 벽면에 부착되어 일어나는 슬래깅 현상은 보일러의 열효율을 감소시키고 보일러 안정성에도 악영향을 준다. 이러한 슬래그의 유동 특성은 회의 용융 특성과 관련이 있는데 이는 회의 화학적 조성에 영향을 받는다. 본 연구에서는 회의 용융특성을 TMA(Thermo-Mechanical Analysis) 장비를 이용하여 분석하였다. 이 테스트는 회의 수축률에 따른 용융온도(T25%, T50%, T75%, T90%)를 정량적으로 측정 하는 방법이다. TMA에서 측정된 각각의 온도는 용융단계별 특성을 나타낸다. TMA로 분석된 결과 값에 XRF 장비를 이용하여 분석한 회의 성분 조성이 미치는 영향을 분석하였다. 회에 포함된 성분 중 refractory, fluxing contents가 회분의 용융온도에 미치는 영향을 확인할 수 있었다. Refractory contents 성분인 $SiO_2$, $Al_2O_3$의 함량이 많을수록 전체적인 용융온도가 올라가며 $SiO_2/Al_2O_3$가 커질수록 고온에서의 용융온도인 T75%, T90%가 낮아지는 것을 알 수 있었다. 이와 달리 fluxing contents 성분인 $Fe_2O_3$, $K_2O$, CaO의 함량이 많아질수록 전체적인 용융온도가 낮아지며 이중 $K_2O$, CaO는 초기 용융 온도인 T25%를 낮추는데 큰 역할을 하는 것으로 판단되었다. TMA 분석과 회의 조성 비교를 통하여 회의 용융 특성을 예측하고 설명할 수 있었다.
본 연구에서는 기존의 이차전지의 분리막보다 좋은 성능으로 각광받고 있는 PVdF (poly(vinylidene fluoride))에 공극률을 높여 전지의 성능을 향상시켜주는 수용성 고분자인 PEG (Poly(ethylene glycol))를 첨가하여 충전용 리튬 이차전지의 분리막을 상전이 방법으로 제조하였다. 용매인 DMF (N,N-dimethylformamide)에 PVdF-PEG를 단일상으로 녹인 후 깨끗한 유리판에 캐스팅하여 막을 얻었다. 기공은 증류수로 채워진 응고조에서 용매-빈용매 교환으로 형성되어진다. 주사전자현미경(scanning electron microscopy, SEM)을 이용하여 분리막의 단면 관찰을 통해 다공성을 확인하였고 UTM (universal testing machine)을 이용하여 기계적 물성을 확인하였다. PEG-10의 정체시간 30 s에서 균일한 스폰지 구조를 확인할 수 있었으며, 이는 87%의 뛰어난 공극률을 가지며 인장강도의 경우 PEG-10에서 3.72 MPa로 가장 크게 나타났고, 신장률과 모듈러스 부분에서도 역시 75.45%와 275.27 MPa로 뛰어난 성능을 나타냈다.
PURPOSES : Recently, bonded concrete overlay has been used as an alternative solution in concrete pavement rehabilitation since its material properties are similar to those of the existing concrete pavements. Deteriorated concrete pavements need rapid rehabilitation in order to prevent traffic jams on Korean expressways. Moreover, speedy and effective repair methods are required. Therefore, the use of bonded concrete overlay with ultra-rapid hardening cement has increased in an effort to reopen promptly the expressways in Korea. However, mobile mixer is required for ultra-rapid hardening cement concrete mixing in the construction site. The use of mobile mixer causes various disadvantages aforementioned such as limitation of the construction supply, open-air storage of mixing materials, increase in construction cost, and etc. In this study, therefore, hydration accelerator in-situ mixing on polymer modified concrete produced in concrete plant is attempted in order to avoid the disadvantages of existing bonded concrete overlay method using ultra-rapid hardening cement. METHODS : Bonded concrete overlay materials using ultra-rapid hardening cement should be meet all the requirements including structural characteristics, compatibility, durability for field application. Therefore, This study aimed to evaluate the application of hydration accelerator in-situ mixing on polymer modified concrete by evaluating structural characteristics, compatibility, durability and economic efficiency for bonded concrete overlay. RESULTS : Test results of structural characteristics showed that the compressive, flexural strength and bond strength were exceed 21MPa, 3.15MPa and 1.4MPa, respectively, which are the target strengths of four hours age for the purpose of prompt traffic reopening. In addition, tests of compatibility, such as drying shrinkage, coefficient of thermal expansion and modulus of elasticity, and durability (chloride ions penetration resistance, freezing-thawing resistance, scaling resistance, abrasion resistance and crack resistance), showed that the hydration accelerator in-situ mixing on polymer modified concrete were satisfied the required criteria. CONCLUSIONS : It was known that the hydration accelerator in-situ mixing on polymer modified concrete overlay method was applicable for bonded concrete overlay and was a good alternative method to substitute the existing bonded concrete overlay method since structural characteristics, compatibility, durability were satisfied the criteria and its economic efficiency was excellent compare to the existing bonded concrete overlay methods.
;Dentistry has benefited from tremendous advances in technology with the introduction of new techniques and materials, and patients are aware that esthetic approaches in dentistry can change one's appearance. Increasingly. tooth-colored restorative materials have been used for restoration of posterior teeth. Tooth-colored restoration for posterior teeth can be divided into three categories: 1) the direct techniques that can be made in a single appointment and are an intraoral procedure utilizing composites: 2) the semidirect techniques that require both an intraoral and an extraoral procedure and are luted chairside utilizing composites: and 3) the indirect techniques that require several appointments and the expertise of a dental technician working with either composites or ceramics. But, resin restoration has inherent drawbacks of microleakage. polymerization shrinkage, thermal cycling problems. and wear in stress-bearing areas. On the other hand, Ceramic restorations have many advantages over resin restorations. Ceramic inlays are reported to have less leakage than resin restoration and to fit better. although marginal fidelity depends on technique and is laboratory dependent. Adhesion of luting resin is more reliable and durable to etched ceramic material than to treated resin composite. In view of color matching, periodontal health. resistance to abrasion, ceramic restoration is superior to resin restorationl. Materials which have been used for the fabrication of ceramic restorations are various. Conventional powder slurry ceramics are also available. Castable ceramics are produced by centrifugal casting of heat-treated glass ceramics. and machinable ceramics are feldspathic porcelains or cast glass ceramics which are milled using a CAD/CAM apparatus to produce inlays (for example, Cered. They may also be copy milled using the Celay apparatus. Pressable ceramics are produced from feldspathic porcelain which is supplied in ingot form and heated and moulded under pressure to produce a restoration. Infiltrated ceramics are another class of material which are available for use as ceramic inlays. An example is $In-Ceram^{\circledR}$(Vident. California, USA) which consists of a porous aluminum oxide or spinell core infiltrated with glass and subsequently veneered with feldspathic porcelain. In the 1980s. the development of compatible refractory materials made fabrication easier. and the development of adhesive resin cements greatly improved clinical success rates. This case report presents esthetic ceramic inlays for posterior teeth.teeth.
사출성형품에서 잔류응력은 성형공정 중 열과 전단응력에 의해 형성된다. 잔류응력을 평가하는 방법은 여러 가지가 있는데, 불투명한 제품에서의 잔류응력은 케미칼 크랙킹 테스트 방법으로 측정 할 수 있다. 이 방법은 시편과 솔벤트가 반응하게 하여 측정하는 방법이다. 크랙은 응력의 크기에 따라 형성되기 때문에 크랙의 크기나 수를 측정하여 응력을 정량적으로 측정한다. 본 연구에서는 케미칼 크랙킹 방법으로 잔류응력을 측정하기 위한 기초자료인 응력과 크랙과의 관계를 규명하기 위한 실험을 수행하였다. 시편을 제작하기 위한 재료는 PC/PBT와 PC/ABS사용하였으며 지그를 이용하여 시편을 변형을 주고 이를 솔벤트에 담궈서 크랙을 유도하였다. 솔벤트는 tetrahydrofuran과 methyl alchol을 이용하여 제조하였다. 두 재료 모두 응력이 어느 정도 이상에서만 크랙이 형성되었으며, 크랙은 응력이 증가함에 따라 대략 2차함수로 증가하였다.
본 논문은 제조공정이 단순하고, 공정시간도 매우 짧아 제조원가를 절감할 수 있는 고분자 유기하드마스크를 합성하는데 목적을 두었다. 승화 정제 장치를 통한 잔류금속을 측정한 결과, 9-Naphthalen-1-ylcarbazole(9-NC)은 4th zone에서 101.75ppb, 2-Naphthol(2-NA)은 5th zone에서 306.98ppb, 9-Fluorenone(9-F)는 4th zone에서 5th zone 사이에서 129.05ppb로 측정되었다. 그리고 합성된 유기하드마스크를 필터 시스템을 거친 후 잔류금속을 측정한 결과 9 ~ 7ppb 측정되었다. 또 열분석 변화를 측정한 결과, 2.78%로 감소하였고 분자량은 942로 측정되었고 탄소 함량은 89.74%이고 수율은 72.4%로 나타났다. 에칭 속도는 평균 18.22Å/s로 측정되었고 코팅 두께 편차는 평균 1.19로 측정되었다. 유기하드마스크의 입자크기가 0.2㎛ 이하에서는 입자가 존재하지 않았다. 코팅 속도를 1,000, 1,500, 1,800rpm으로 변화를 주어 코팅 두께를 측정한 결과, 수축률은 17.9에서 20.8%까지 측정되었고 코팅 결과 SiON과 접착력이 우수하고 유기하드마스크가 균일하게 도포되었음을 알 수 있었다.
목적: 본 연구에서는 사출형 안경테 소재로 사용되고 있는 폴리아미드-12 수지인 TR-90을 대체하기 위하여 폴리아미드-66에 유리섬유(glass fiber)를 함량별로 블렌드하여 각 조성물의 물리적, 열적 특성을 평가하여 안경테로써의 적용 가능성을 검토하였다. 방법: 유리섬유의 함량 변화에 따른 폴리아미드-66 조성물의 특성변화를 고찰하기 위해 이축압출기를 이용하여 함량별 조성물을 제조하였다. 제조된 조성물의 기계적강도, 열적 특성, 코팅성 및 절삭가공성을 평가하였다. 이를 통하여 기존 TR 안경테 제품과의 성능 비교 및 안경테로써 적용 가능성을 평가하였다. 결과: 폴리아미드-66/유리섬유 조성물의 특성 평가 결과, 유리섬유의 함량이 증가할수록 성형수축율이 감소하며, 기계적 강도가 증가하는 것으로 나타났다. 유리섬유의 함량이 0 wt%인 경우 인장강도는 $498kg/cm^2$에서 30 wt%가 함유된 경우 $849kg/cm^2$까지 증가하였다. 코팅성 평가 결과 유리섬유 5 wt%에서는 코팅강도가 4 B였고, 그 이상에서는 5 B로 매우 우수한 코팅 특성을 나타내었다. 결론: 30 wt%의 유리섬유가 블렌드된 경우 기계적 강도가 크게 향상되나 이와 더불어 경도가 상승되며, 점도가 증가하여 사출온도가 높아지며, 제품에 플로우 마크가 생기는 것으로 나타났다. 유리섬유가 블렌드된 폴리아미드-66의 도료 코팅성은 모두 우수하였다. 전반적으로 물성 및 가공성 등을 평가해볼 때, 유리섬유의 함량이 약 10 wt% 내외의 경우 안경테로써의 적용이 가능하다고 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.