• 유기물자원화
• /
• 제21권3호
• /
• pp.43-52
• /
• 2013

본 연구에서는 유입 슬러지에 다양한 전처리 방법을 적용하여 전처리 방법이 중온혐기-고온호기 복합 슬러지 처리 공정의 슬러지 소화효율과 메탄가스 생성량에 미치는 영향을 비교 검증하였다. 실험실 규모의 슬러지 소화장치를 제작하여 서로 다른 유입 슬러지 전처리방법을 적용하여 4단계로 실험을 진행하였다. 1단계에서는 전처리를 하지 않은 슬러지를 공급하였고, 2, 3, 4단계에서는 각각 열처리, 열-알칼리처리, 장기 알칼리 처리(7일)를 거친 유입 슬러지를 공급하였다. 실험 결과, 1단계에서 4단계까지 진행되는 동안 총COD 제거율은 44%에서 76%까지 증가하였으며, 메탄 생성량 또한 101mL/L/day에서 165, 256mL/L/day까지 크게 증가하였다. 한편, 4단계에서는 7일간의 장기 알칼리 처리를 하였음에도 불구하고 3단계에 비해 총COD 제거율과 메탄 생성량이 증가하지 않았다. 결론적으로, 유입 슬러지의 전처리를 통해 복합 슬러지 처리 공정의 슬러지 제거 효율과 메탄생성량을 크게 증가시킬 수 있었으며, 여러 가지 전처리 방법 중 열-알칼리 처리법이 가장 효율적임을 실험결과를 통해 알 수 있었다.

• Carbon letters
• /
• 제9권4호
• /
• pp.308-315
• /
• 2008

In the present study, fast isothermal stabilization processes for rayon precursor fabrics were performed at $350^{\circ}C$ and $400^{\circ}C$ within 3 minutes and the chemical and physical characteristics of the stabilized fabrics were investigated. In addition, rayon precursor fabrics were pre-treated with three different phosphorous-based flame retardants and then stabilized. The effect of flame retardants on the chemical composition, thermal shrinkage, weight change, thermal stability and XRD results was examined, comparing with those of the precursor fabrics. The result showed that the stabilization of rayon fabrics was most effective as the stabilization temperature was $350^{\circ}C$, the stabilization time was 3 min, and the pre-treatment with phosphoric acid of 1 vol%. The carbon contents of stabilized rayon fabrics were increased with increasing stabilization temperature and time, whereas the oxygen contents were decreased. Also, it is likely that the pre-treatment with phosphoric acid plays a role in retarding the change of chemical structure of rayon fabric. The XRD result was quite consistent with the result showing the effect of phosphoric acid on the chemical composition, thermal shrinkage and weight reduction of rayon fabric.

• International journal of advanced smart convergence
• /
• 제5권2호
• /
• pp.18-23
• /
• 2016

Cell walls of microalgae consist of a polysaccharide and glycoprotein matrix providing the cells with a formidable defense against its environment. Anaerobic digestion (AD) of microalgae is primarily inhibited by the chemical composition of their cell walls containing biopolymers able to resist bacterial degradation. Adoption of pre-treatments such as thermal, thermal hydrolysis, ultrasound and enzymatic hydrolysis have the potential to remove these inhibitory compounds and enhance biogas yields by degrading the cell wall, and releasing the intracellular algogenic organic matter (AOM). This paper preproposal stage investigated the effect of different pre-treatments on microalgae cell wall, and their impact on the quantity of soluble biomass released in the media and thus on the digestion process yields. This Paper present optimum approach to degradation of the cell wall by ultra-sonication with practical design specification parameter for ultrasound based pretreatment system. As a result of this paper presents, a microalgae system in a wastewater treatment flowsheet for residual nutrient uptake can be justified by processing the waste biomass for energy recovery. As a conclusion on this result, Low energy harvesting technologies and pre-treatment of the algal biomass are required to improve the overall energy balance of this integrated system.

• 한국물환경학회지
• /
• 제35권4호
• /
• pp.299-307
• /
• 2019

The purpose of this study was to investigate the effect of low temperature thermal pre-treatment on biodegradation of waste activated sludge for anaerobic digestion as a countermeasure for increasing sludge generation. The experimental condition was accomplished in 2 %, 4 %, and 6 % TS concentration, and $70^{\circ}C$, $80^{\circ}C$, $90^{\circ}C$ of temperature for a maximum of 120 minutes retention time. Then, it was followed by analysis of physical/chemical properties, BMP test and composition of biogas. The biogas characteristic was evaluated by applying the modified Gomperz model. As a result, solubility of dissolved substrate, such as $SCOD_{Cr}$, soluble carbohydrate, and soluble protein, and biogas production increased as temperature increased. Solubilization efficiency at $90^{\circ}C$ was 18.4 %, 17.03 % and 16.88% in 2 %, 4 %, and 6 % TS concentration respectively. Also, solubilization rates of carbohydrate and protein similarly increased. BMP test results also showed that methane production in excess sludge increased to 0.194, 0.187 and $0.182m^3/kg$ VS. respectively, and lag phase decreased to 0.145, 0.220, 0.351 day due to acceleration of the hydrolysis step. Consequently, low-temperature thermal pre-treatment could increase biodegradability of sludge, positively affecting biogas production and sludge reduction.

• The Journal of Korean Physical Therapy
• /
• 제16권1호
• /
• pp.157-182
• /
• 2004

The purpose of this study was to evaluate effects of lumbar stabilizing exercise on the functional recovery and the range of motion of low back pain patients. The subjects were consisted of sixty patients who had non specific chronic low back pain(32 females. 28 males; mean aged 37.3) from 19 to 65 years of age(mean age : 37.3). All subjects randomly assigned to the lumbar stabilizing exercise group, the modalities treatment group, the manual treatment group. Lumbar stabilizing exercise group received manual treatment with lumbar stabilizing exercise for 30minutes, modalities treatment group received hot pack used thermal therapy for 20minutes and ICT used electrical therapy for 20minutes and US or MWD used deep thermal therapy for 15minutes, manual treatment group received modalities treatment with therapeutic massage for 10minutes and joint mobilization or manipulation for 10minutes per day and three times a week during 4 weeks period. The Multilevel Roland-Morris Disability Questionnaire(MR-MDQ) was used to measure functional disability level. Visual Analogue Scale(VAS) was used to measure subjective pain level. Remodified Schober test(RST) was used to measure forward flexion range of motion of lumbar segment. Finger-to-Floor test(F-T-FT) was used to measure forward flexion range of motion of full spine of low back pain patients. All measurements of each patients were measured at pre-treatment and 4 week post-treatment. The results of this study were summarized as follows : 1. The MR-MDQ of lumbar stabilizing exercise group, modalities treatment group, and manual treatment group was significantly reduced between pre-treatment and post-treatment(p<.05). 2. The VAS of lumbar stabilizing exercise group, modalities treatment group, and manual treatment group was significantly reduced between pre-treatment and post-treatment(p<.05). 3. The RST of lumbar stabilizing exercise group, modalities treatment group, and manual treatment group was significantly reduced between pre-treatment and post-treatment(p<.05). 4. The F-T-FT of lumbar stabilizing exercise group, modalities treatment group, and manual treatment group was significantly reduced between pre-treatment and post-treatment(p<.05). 5. The results of analyzed effects of MR-MDQ, RST, F-T-FT were significantly reduced (p<.05), but VAS wasn't significantly reduced(p>.05) between treatment type of lumbar stabilizing exercise group and modalities treatment group and manual treatment group according to pre-treatment and post-treatment. 6. The results of LSD post-hoc to find difference between treatment type of lumbar stabilizing exercise group and modalities treatment group and manual treatment group according to pre-treatment and post-treatment that MR-MDQ was significantly reduced stabilizing exercise group than modalities treatment group(p<.05), and VAS wasn't significantly reduced all treatment group(p>.05), and RST was significantly reduced stabilizing exercise group than modalities treatment group(p<.05), and F-T-FT was significantly reduced stabilizing exercise group than modalities treatment group and manual treatment group (p<.05).

• 한국수소및신에너지학회논문집
• /
• 제25권4호
• /
• pp.355-363
• /
• 2014

Thermal shock or overheating of WGS catalyst for SEWGS system during hydrogen pre-treatment can cause reactivity decay of the catalyst. To select appropriate pre-treatment condition, temperature profiles of catalyst bed (or outside fluidized particle bed of bed insert) during pre-treatment were measured and then CO conversions of those catalysts during WGS reaction were also measured and compared. Drastic overheating of catalyst took place when we reduce catalyst at fixed bed condition and these catalysts showed low CO conversion during WGS reaction. On the contrary, there was no overheating of catalyst at fluidized bed condition not only physical mixing case but also bed insert case. Spring type bed insert showed acceptable CO conversion even at low WGS content. Consequently, feasibility of high CO conversion without decay of reactivity of catalyst and holding the WGS catalyst inside the SEWGS reactor as tablet shape were confirmed using spring type bed insert.

• 한국수소및신에너지학회논문집
• /
• 제25권1호
• /
• pp.11-18
• /
• 2014

This study was conducted to investigate the effect of thermal pre-treatment on bio-hydrogen from food waste. Two continuous reactors operated and VFAs(volatile fatty acids) production and microbial communities were analyzed. The average hydrogen yield was 0.50 and 0.33mol $H_2/mol$ $hexose_{added}$ in thermally treated food added reactor(R1) and control(R2), respectively. Butyrate concentration was similarly 7,500mg/L in both reactors, but two times higher lactate concentration was observed in R2(3,800mg/L). The results of FISH(fluorescence in situ hybridization) showed that the relative microorganism to hydrogen producing bacteria was 78 and 27% in R1 and R2, respectively.

• Applied Science and Convergence Technology
• /
• 제25권6호
• /
• pp.149-153
• /
• 2016

Thermal oxidation has significant potential for use in synthesizing metal-oxide nanostructures from metallic materials. However, this method has limited applicability to the synthesis of multi-morphology NiO from Ni foil. Techniques consisting of mechanical and chemical approaches were used to pre-treat the Ni foil (prior to oxidation) to promote the formation of nanowires and nanoplates on the NiO layer. These morphologies were realized on the Ni foils scratched by sand paper and a knife, respectively, and subsequently heat-treated at $500^{\circ}C$ for 24 h. Small nanowires (diameter: <10 nm) formed on the Ni foil treated by absolute $HNO_3$ and then oxidized at $500^{\circ}C$ for 24 h. The formation of various morphologies (on the pre-treated Ni foil), which differ from that formed in the case of pristine Ni foil after oxidation, may be attributed to the surface melting phenomenon that occurs during the nucleation process.

• Environmental Engineering Research
• /
• 제15권4호
• /
• pp.225-230
• /
• 2010

In order to treat soil contaminated with high percentages of water and petroleum, the combined microwave and thermal desorption process was studied, which was composed of the consecutive connection of two pre-treatment processes. For the thickness of the contaminated soil layer on the transfer conveyor belt, the optimal total petroleum hydrocarbon (TPH) removal rate was studied with respect to the duration of microwave exposure in the consecutive process combined with thermal desorption. The TPH removal rate when the contaminated soil layer thickness was 1 cm at 6 kW of microwave power was 80%. The removals rates for 2 and 3 cm soil layer thicknesses were both 70%. Under identical experimental conditions, the TPH removal rate for the microwave pre-treatment, when considering the soil particle size, was over 70%. The lowest TPH removal rate was achieved with a particle diameter of 2.35 mm. For contaminated soil with 30% water content, 6 kW and a thermal desorption temperature of $600^{\circ}C$ were the optimal operational conditions for the removal of THP. However, considering the fuel consumption cost, 4 kW and a thermal desorption temperature of $300^{\circ}C$ would be the most economic conditions.

• Journal of Welding and Joining
• /
• 제17권2호
• /
• pp.61-65
• /
• 1999

Because of the need for packages which accommodate high pin count, high density and high speed device, PBGA(plastic ball grid array) package gets more spotlight. But the substrate material which is used for PBGA package is in nature susceptible to moisture penetration. The objective of the study is to find out the path of delamination in the stacked structure of substrate. To increase the adhesion between the cooper laminate and PSR(photo solder resist) which is the weakest part, experiments were performed by changing parameters of printing pre-treatment and post-treatment process. As a result of experiments, the factor effects on the adhesion between the cooper laminate and PSR is caused by all of the pre-treatment and post-treatment condition. A considerable change was observed depending on the amount of UV irradiation after thermal cure which is typical of printing post-treatment condition rather than pre-treatment condition.