• Journal of Magnetics
• /
• 제4권1호
• /
• pp.26-32
• /
• 1999

The HDDR process can be used as an effective means of processing of the coercive Nd-Fe-B-type or the Sm2Fe17Nx materials. The HDDR (hydrogenation, disproportionation, desorption, recombination) processed materials are feartured with a very fine microstructure. The thermomagnetic characteristics of the Nd-Fe-B-type or the Sm2Fe17Nx materials with fine microstructure due to the HDDR process were investigated. It has been found that the fine-microstructured hard magnetic materials showed an unusual TMA (Thermomagnetic analysis) tracting featured with a low and constant magnetization at lower temperature range and a peak just below their Curie temperatures when a low external field is applied. This thermomagnetic characteristic was immediate particularly in the TMA with a low applied field. This thermomagnetic characteristic was interpreted in terms of the competition between two counteracting effects; the decrease in magnetication due to the thermal agitation at an elevated temperature and the increase in magnetization resulting from the rotation of magnetization of the fine grains comparable to a critical single domain size due to the decreased magnetocrystalline anisotropy at an elevated temperature.

• 한국수소및신에너지학회논문집
• /
• 제30권1호
• /
• pp.8-13
• /
• 2019

In order to apply the Sievert's type automatic apparatus to thermal analysis of hydrogen absorbing materials, the Sievert's type automatic apparatus was modified in my laboratory. In this study, an experiment was conducted to see if hydrogen absorption and desorption reactions are possible under near constant pressure (${\pm}0.05atm$) using this device. The hydrogenation and dehydrogenation of the Mg-H system was investigated. And the program was also modified for the kinetics. It was found that it is possible to measure the hydrogen absorption rate under near constant pressure of Mg by using the modified Sievert's type automatic apparatus at 573 K and 598 K. And using this system, the hydrogen desorption rate of Mg hydride under near constant pressure at 623 K was also measurable. However, since the hydrogen desorption rate of Mg hydride is fast at 648 K, the hydrogen desorption reaction did not proceed within a constant pressure range of $0.15{\pm}0.05atm$.

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.608-614
• /
• 2023

The fast filling process of high-pressure hydrogen has an important impact on the filling efficiency and safety. In this paper, a specific study is carried out on the thermophysical phenomena during the fast filling process. Starting from the gas state equation of hydrogen, the change law of the hydrogen storage temperature is obtained, and then the temperature rise prediction is constructed. The model can clarify the relationship between the filling parameters and the temperature rise during the fast filling process, thereby revealing the flow and heat transfer laws of the fast charging process. To improve the theoretical research basis for the evaluation of vehicle-mounted hydrogen fast charging capacity, temperature prediction and optimization of hydrogenation methods.

• 대한기계학회논문집B
• /
• 제41권6호
• /
• pp.381-387
• /
• 2017

수소화붕소나트륨은 안정적으로 수소가 저장된 물질이며, 촉매반응으로 수소를 용이하게 분리할 수 있다. 본 연구에서는 탈수소 반응률을 높이기 위해 비표면적이 큰 마이크로 pin fin 화학반응기를 제작하여 수소화붕소나트륨 수용액의 압력강하 및 탈수소 화학반응 실험을 수행하였다. 나노공정을 이용하여 실리콘웨이퍼에 높이 $300{\mu}m$, 직경 $50{\mu}m$의 pin fin을 축간격 1.3, 횡간격 1.5으로 엇갈림 배열하였다. 수소화붕소나트륨 수용액은 5~20 wt.% 농도로 Re수 1~60으로 공급되었으며, 초고속카메라를 이용하여 탈수소반응 유동양상을 관찰하였다. 실험 결과 마이크로 pin fin 화학반응기는 동일 수력학적직경을 가지는 직관 마이크로채널 화학반응기보다 화학반응 성능이 2.45배 우수한 반면, 압력강하는 1.5배 증가하였다.

• 한국재료학회지
• /
• 제11권10호
• /
• pp.889-894
• /
• 2001

2wt% $Al_2O_3-doped$ ZnO (AZO) thin films were deposited on sapphire (0001) single crystal substrate by parellel type rf magnetron sputtering at 55$0^{\circ}C$. The as-grown AZO thin films was polycrystalline and showed only broad deep defect-level photoluminescence (PL). In order to examine the change of PL property, AZO thin films were annealed in $N_2$ (N-AZO) and $H_2$ (H-AZO) at the temperature of $600^{\circ}C$~$1000^{\circ}C$ through rapid thermal annealing. After annealed at $800^{\circ}C$, N-AZO shows near band edge emission (NBE) with very small deep-level emission, and then N-AZO annealed at $900^{\circ}C$ shows only sharp NBE with 219 meV FWHM. In Comparison with N-AZO, H-AZO exhibits very interesting PL features. After $600^{\circ}C$ annealing, deep defect-level emission was quire quenched and NBE around 382 nm (3.2 eV) was observed, which can be explained by the $H_2$passivation effect. At elevated temperature, two interesting peaks corresponding to violet (406 nm, 3.05 eV) and blue (436 nm, 2.84 eV) emission was firstly observed in AZO thin films. Moreover, peculiar PL peak around 694 nm (1.78 eV) is also firstly observed in all the H-AZO thin films and this is believed good evidence of hydrogenation of AZO. Based on defect-level scheme calculated by using the full potential linear muffin-tin orbital (FP-LMTO), the emission 3.2 eV, 3.05 eV, 3.84 eV and 1.78 eV of H-AZO are substantially deginated as exciton emission, transition from conduction band maximum to $V_{ Zn},$ from $Zn_i$, to valence band maximum $(V_{BM})$ and from $V_{o} to V_BM}$, respectively.

• 대한화장품학회지
• /
• 제46권1호
• /
• pp.31-42
• /
• 2020

말지방(horse fat)은 아시아에서 효능 있는 원료로 알려져 있어, 말지방에 첨가제 수준에서 다른 성분을 혼합한 거의 말지방 자체를 완제품으로 판매하는 경우가 상당수 있다. 이런 경우 말지방 원료의 물성이 중요한데, 국내에서 정제된 말지방의 경우 온도 안정성이 낮아 저온에 보관하지 않으면 분리가 발생하는 불편한 점이 발생하기도 한다. 일본산 말지방의 경우 부분적으로 수소 첨가하거나 액체상과 고체상을 분리시켜 고체상을 말지방으로 사용하고 있어 제주산 말지방보다 더 단단하고 안정된 성상을 나타내고 있다. 본 연구에서는 제주산 말지방을 부분적으로 수소 첨가하는 공정 없이도 안정한 물성으로 향상시키기 위한 물성향상 실험을 진행하였다. 실험은 다양한 오일겔화제(oil gelling agent)를 사용하였으며 여러 차례 실험을 진행한 결과 hydroxystearic acid를 첨가한 제주산 말지방에서 가장 물성이 향상된 것을 확인하였다. 또한 hydroxystearic acid를 첨가시켜 개선된 제주산 말지방과 100% 제주산 말지방, 100% 일본산　말지방에 대해 실온(25 ℃), 항온(40 ℃, 45 ℃)에서 안정성 평가를 진행하였고, 각 말지방에 대해 온도별 유동거동을 평가한 결과 hydroxystearic acid를 첨가시켜 개선한 제주산 말지방이 일본산 말지방과 유사한 유동거동을 나타냈다. 또한 현미경으로 결정입자를 관찰한 경우, hydroxystearic acid 첨가에 따라 침상결정의 크기를 작게 함으로써 좀 더 열안정성을 향상시키는 것으로 나타났다. 이에 hydroxystearic acid를 첨가시켜 개선된 제주산 말지방은 실온에서 장시간 보관하여도 물성에 이상이 없음을 확인할 수 있었다.