• 설비공학논문집
• /
• 제13권1호
• /
• pp.38-47
• /
• 2001

The operation characteristics of variable conductance heat pipe(VCHP) were numerically investigated by using 1-dimensional diffuse-front model. For different boundary conditions, the amount of non-condensible gas charge and dimension of gas reservoir were obtained by iterative calculation. It is found that the amount of non-condensible gas charge and dimensions of gas reservoir have an effect on the temperature control of condenser for the given operating condition of VCHP. The numerical results show that VCHP has an excellent capability of temperature control when subjected to a change in the heat input.

• 한국수소및신에너지학회논문집
• /
• 제24권3호
• /
• pp.206-215
• /
• 2013

A linear engine has advantages in terms of volume and weight, because there are no rotating parts. Thus, it is considered that linear engines might be suitable in hybrid vehicles. However, the linear engine has challenges in terms of the engine ignition timing and efficiency, so the engine has not been commercialized yet. In this study, the dynamic and combustion characteristics of the linear engine might be specified by various loads which are changed by conductance. The engine used in this experiment consists of two combustion chambers, four compressors, two linear alternators and a mover with a piston head and magnets. The way fuel is supplied in the experiment is by propane fuel being mixed with air in the carburetor, then being delivered into combustion cylinders via compressors. In the experiment, conductance is altered from 0.04 to 0.16mho, and the ignition timing is ahead by just 5.0mm from the maximum stroke. As a result of the experiment, frequency, stroke, input calories and maximum pressure are decreased when the conductance is increased. Meanwhile, IMEP, generation efficiency and electric power are increased when the conductance is increased. Therefore, it might confirm that high conductance generates more efficient electric power, but that thermal efficiency is the highest in the state of 0.08mho.

• Progress in Superconductivity
• /
• 제12권1호
• /
• pp.41-45
• /
• 2010

Low temperature micro-calorimeters have been employed in the field of high resolution alpha spectrometers. These alpha detectors typically consist of a superconducting or metal absorber and a temperature sensor. The temperature sensor can be a transition edge sensor (TES), a metallic magnetic calorimeter (MMC) or other low temperature detectors for an accurate measurement of temperature change due to an alpha particle absorption. We report a recent study of the heat flow between a replaceable absorber and a temperature sensor. A piece of gold foil in $2.4{\times}2.7{\times}0.03\;mm^3$ is used as an absorber. A $40\;{\mu}m$ diameter Au:Er paramagnetic sensor is attached to another small piece of gold foil in $400{\times}200{\times}30\;{\mu}m^3$ to serve as the temperature sensor. This sensor assembly, Au:Er and gold foil, is placed on a miniature SQUID susceptometer in a gradiometric configuration. The thermal connection between the absorber and the sensor was made with three gold bonding wires. The measured thermal conductance shows a linear dependence to the temperature. The values are in a good agreement with Wiedemann-Franz type thermal conductance of the gold wires.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권3호
• /
• pp.225-231
• /
• 2010

In this paper, we investigate the channel thermal noise in nanoscale MOSFETs. Simple analytical model of thermal noise factor in nanoscale MOSFETs is presented and it is verified with accurately measured noise data. The noise factor is expressed in terms of the channel conductance and the electric field in the gradual channel region. The proposed noise model can predict the channel thermal noise behavior in all operating bias regions from the long-channel to nanoscale MOSFETs. From the measurement results, we observed that the thermal noise model for the long-channel MOSFETs does not always underestimate the short-channel thermal noise.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.174-180
• /
• 2010

Conductive and radiative thermal model configurations of an imager of a geostationary satellite are presented. A two-plane method is introduced for three dimensional conductive coupling which is not able to be treated by thin shell plate thermal modeling technique. Especially the two-plane method is applied to massive matters and PIP(Payload Interface Plate) in the imager model. Some massive matters in the thermal model are modified by adequate correction factors or equivalent thickness in order to obtain the numerical results of thermal modeling to be consistent with the analytic model. More detailed nodal breakdown is specially employed to the object which has the rapid temperature gradient expected by a rule of thumb. This detailed thermal model of the imager is supposed to be used for detailed analyses and test predictions, and be correlated with the thermal vacuum test results before final in-flight predictions.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권4호
• /
• pp.1-7
• /
• 2015

This paper addresses technical problems of thermal contact conductance or resistance which inevitably occurs in most cryogenic engineering systems. The main focus of this paper is to examine what kind of physical factors primarily influences the thermal contact resistance and to suggest how it can be minimized. It is a good practical rule that the contact surface must have sub-micron roughness level with no oxide layer and be thinly covered by indium, gold, or Apiezon-N grease for securing sufficient direct contact area. The higher contact pressure, the lower the thermal contact resistance. The general description of this technique has been widely perceived and reasonable engineering results have been achieved in most applications. However, the detailed view of employing these techniques and their relative efficacies to reduce thermal contact resistances need to be thoroughly reviewed. We should consider specific thermal contact conditions, examine the engineering requirements, and execute each method with precautions to fulfil their maximum potentials.

• 대한기계학회논문집A
• /
• 제40권1호
• /
• pp.41-51
• /
• 2016

볼나사 시스템은 볼과 그루브 사이에서 발생하는 마찰에 의해 온도가 상승하며, 이에 따른 열변형이 이송계의 위치결정 정도를 저하시킨다. 이를 보상하기 위해서는 볼나사 온도분포의 우선적 예측이 필요하다. 본 논문에서는 나사축 회전속도에 따른 온도분포를 해석하기 위해 볼나사 축과 너트를 각각 실린더와 중공 실린더로 가정한다. 경계조건인 대류 열전달계수, 볼과 그루브에서 발생하는 마찰토크와 접촉열전도를 볼나사 운전 및 조립 조건에 대하여 정식화 한다. 그리고, 현시적 유한차분법을 적용한 온도 분포 예측 시뮬레이터를 개발하고 그 유용성을 검증한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.175-176
• /
• 2011

• Nuclear Engineering and Technology
• /
• 제23권1호
• /
• pp.66-80
• /
• 1991

전형적 PWR 비상노심냉각계통에서의 12 inch 파단사고에 대응하는 LOFT 중형냉각재 상실사고 모사 실험 자료 L5-1을 이용하여 RELAP5/MOD2 Cycle 36.04 전산코드의 평가가 수행되었다. 평가 근거는 기준 코드와 nodalization에 의한 계산 결과가 L5-1 실험 결과와 잘 일치하는지, 추가적인 민감도 분석 연구로는 이중 노심 유로 및 열적 모델을 고려하고 model 민감도 분석으로는 reflood, gap conductance option 사용 여부에 따른 피복재 온도에 미치는 영향을 관찰하였다. 기준 계산 결과 기준 모델이 L5-1 현상을 대체로 잘 모사하였으나, 피복재가 천천히 가열되고 주변 부위의 피복재 온도가 과대하게 예견되었다. 민감도 분석 결과 단일 열적 모델이 피복재 가열 시작을 10초개선 하였고, 이중 유로 모델이 주변 온도를 20K 개선하였으나 최대 피복재 온도는 기준 계산시 보다 정확치 못하였으므로, 기준 모델인 단일 유로, 이중 열적 구조 그리고 reflood option은 사용하고 gap conductance option은 사용치 않는 것이 코드의 중형 냉각재 상실사고 해석시 피복재 온도 관찰의 관점에서 바람직하다.

• 한국의류학회지
• /
• 제24권5호
• /
• pp.696-701
• /
• 2000

Stockings are considered to be excellent in retention of heat in cool weather. This study was to investigate the physiological effects of wearing support panty stocking when exposed to the cool environment from mild environment. Five healthy female college students wearing(ST) or not wearing(NST) support panty stocking, rested at 25$\pm$1$^{\circ}C$, 50$\pm$5% R.H. and were exposed to 18$\pm$1$^{\circ}C$, 50$\pm$5% R.H. for 90 minutes. The results obtained were as follows: Rectal Temperatures were lower in ST than in NST at both environments. Skin temperatures in ST were revealed higher at $25^{\circ}C$, but lower at 18$^{\circ}C$ than in NST. Heat production and total weight loss didn't show significant difference between ST and NST. Total thermal conductance from the body to the environment was higher in ST than in NST at 18$^{\circ}C$. It was suggested that wearing support panty stocking would keep the body warm in mild environment, but facilitate heat loss from the body in cool environment.