• 제목/요약/키워드: Thermal Time Scale

검색결과 251건 처리시간 0.026초

한국 서해 대륙붕 군산분지 까치-1공의 층서 (Stratigraphy of the Kachi-1 Well, Kunsan Basin, Offshore Western Korea)

  • 유인창;김태훈
    • 자원환경지질
    • /
    • 제40권4호
    • /
    • pp.473-490
    • /
    • 2007
  • 서해 대륙붕 군산분지 까치-1공의 퇴적층을 통합층서적 접근을 통하여 분석하였다. 분석 결과, 까치-1공 내에서 (1)트라이아스기 돌로마이트 기반암층, (2) 후기 쥬라기 말-전기 백악기 초 퇴적층, (3) 전기 백악기 퇴적층, (4) 후기 백악기 퇴적층 및 (5) 중기 마이오세 이후 퇴적층 등 5개의 단위층들이 인지되었다. 각 단위층은 부정합에 의해 경계되는 구조층서 단위층으로 군산분지의 형성, 퇴적 및 변형에 대한 정보를 제공해 준다. 후기 쥬라기 말에 들어와 탄루탄층대를 따라 이차 및 삼차 순위의 주향이동 단층들이 분지되면서 소규모 열개 분지들이 형성되기 시작하였다. 전기 백악기 이후 팔레오세 말까지 지속된 분지단층들의 좌수향 이동에 의해 군산분지는 대규모의 인장력을 받게 되어 소규모 열개 분지들은 대규모의 인리형 분지로 확장되었다. 그러나 팔레오세 말에 시작된 인도판과 유라시아판의 연성충돌에 의한 1차 히말라야 조산운동의 영향으로 탄루단층이 우수향으로 이동을 시작하면서 군산분지는 서서히 변형을 받기 시작하였다. 이후 에오세 중기에 일어났던 인도판과 유라시아판의 강성충돌에 의한 2차 히말라야 조산운동에 의해 탄루단층의 우수향 이동이 본격화되면서 군산분지는 극심한 구조역전의 현상이 일어났다. 따라서 에오세 말과 올리고세 동안 군산분지에서는 심한 구조역전에 의한 분지변형이 일어났다. 올리고세 이후 현재까지, 군산분지는 간헐적인 해침과 함께 광역적인 침강을 유지하면서 안정된 대륙 연변부 침강분지로 전이되었다.

Analysis on Heating Effects of the Vertical Type Geothermal Heat Pump System

  • Kang, Youn Ku;Ryou, Young Sun;Jang, Jae Kyung;Kim, Young Hwa
    • Journal of Biosystems Engineering
    • /
    • 제39권2호
    • /
    • pp.69-75
    • /
    • 2014
  • Purpose: This paper is aimed at analyzing the heating performance of the vertical closed loop type Geothermal Heat Pump System (GHPS) distributing the farm site and providing basic data of the GHPS. Method: Seedling greenhouse heating was made from October 2012 to May 2013. The seedling greenhouse was divided into 4 sectors (A, B, C and D zone, total $3,300m^2$) with different temperatures. It was heated from 5PM to 8AM, and during the night the greenhouse was covered by non-woven fabric thermal curtains along the upper 2m of the greenhouse for temperature maintenance. In order to analyze the heating performance of the GHPS, power consumption and operating time of the GHPS, inlet and outlet water temperature of the condenser, temperatures of each zone of the greenhouse, and ambient temperature were measured. Results: When operating only one heat pump unit, heat generated in the condenser decreased as the experiment progressed and power consumption increased correspondingly. However, the heating coefficient of performance decreased from 3.3 to 2.0 rapidly. Also, when operating two heat pump units, heat generated in the condenser decreased and power consumption increased. Heating coefficient of performance decreased from 4.5 to 3.7 rapidly. When the set temperature of the greenhouse was $13.7{\sim}20.1^{\circ}C$ and minimum ambient temperature was $-20.8{\sim}4.8^{\circ}C$, the annually accumulated heat and power consumption were 520,623 kW, 142,304 kW, respectively. Conclusion: When the set temperature of the greenhouse was $13.7{\sim}20.1^{\circ}C$ and the minimum ambient temperature was $20.8{\sim}4.8^{\circ}C$, the annually accumulated heat and power consumption were 520,623 kW, 142,304 kW, respectively. When operating only one heat pump unit, the heating COP was 2.0~3.3, and when operating 2 heat pump units, it was 3.7~4.5. If several heat pumps are installed in one GHPS, it is suggested that all heat pumps be operated except in special cases. Because the scale of the water pumps are set to the scale of when all heat pump units are operating, if even one unit is not operating, the power consumption will increase. That becomes the cause of COP decrease.

소공간 실험구의 차광과 통풍에 의한 기온저감 효과 (Air Temperature Decreasing Effects by Shading and Ventilation at Micro-scale Experiment Plots)

  • 김현철;우지근
    • 한국환경복원기술학회지
    • /
    • 제13권6호
    • /
    • pp.39-48
    • /
    • 2010
  • The purpose of this study was to analyze air temperature decreasing effects by shading and ventilation at micro-scale experiment plots, especially focused on the Wet Bulb Globe Temperature (WBGT) in outdoor spaces. To monitor the time-serial changes of Dry-bulb Temperature (DT), Globe Temperature (GT) and Relative Humidity (RH) in the wind blocking and shading conditions, Two hexahedral steel frames were established on the open grass field, the dimension of each frame was 1.5m(W)${\times}$1.5m(L)${\times}$1.5m(H). Four vertical side of one frame was covered by transparent polyethylene film to prevent wind passing through (Wind break plot; WP). The top side of the other frame was covered with shading curtain which intercept 95% of solar light and energy (Shading plot; SP). And, Another vertical steel frame without any treatment preventing ventilation and sunlight was set up, which represents natural conditions (Control plot; CP). The major findings were as follows; 1. The average globe temperature (GT) was highest at WP showing $50.94^{\circ}C$ and lowest at SP showing $34.58^{\circ}C$. The GT of natural condition (SP) was $42.31^{\circ}C$ locating the midst between WP and SP. The difference of GT of each plot was about $8-16^{\circ}C$, which means the ventilation and shading has significant effect on decreasing the temperature. 2. WP showed the highest average dry-bulb temperature (DT) of $38.41^{\circ}C$ which apparently differ from SP and CP showing $31.94^{\circ}C$ and $33.15^{\circ}C$ respectively. The DT of SP and CP were nearly the same. 3. The average relative humidity (RH) was lowest at WP showing 15.21%, but SP and CP had similar RH 28.79%, 28.02% respectively. 4. The average of calculated WBGT were the highest at the WP ($27.61^{\circ}C$) and the lowest at the SP ($23.64^{\circ}C$). The CP ($25.49^{\circ}C$) was in the middle of the others. As summery, compared with natural condition (CP), the wind blocking increased about $2.11^{\circ}C$ WBGT, but the shading decreased about $1.84^{\circ}C$ WBGT. So It can be apparently said that the open space with much shading trees, sheltering furnitures and well-delivered wind corridor can reduce useless and even harmful energy for human outdoor activity considerably in outdoor spaces.

방출셀을 이용한 액상건축자재 오염물질 방출시험방법 정립에 관한 연구 (Study on establishment of emission cell test method for liquid phase building materials)

  • 임정연;장성기;서수연
    • 분석과학
    • /
    • 제22권3호
    • /
    • pp.191-200
    • /
    • 2009
  • 이 연구는 소형방출챔버와 방출셀을 이용한 총휘발성유기화합물(TVOC) 방출시험결과의 상관성을 규명하여 방출셀을 이용한 액상 건축자재 오염물질 방출시험 방법을 정립하고 활용방안을 제시하기 위한 기초 자료를 확보하고자 수행되었다. 소형방출챔버와 방출셀을 이용한 액상 건축자재 방출시험을 실시하기 위해 방출시험 적합성 여부를 판단하고 최적조건을 확립하기 위하여 방출시험장치, 분석기기에 대한 성능평가를 실시하였다. 방출시험 장치인 소형방출챔버와 방출셀의 배경농도 청정도, 기밀도, 회수율, 분석장치인 열탈착장치 회수율 및 GC/MS 기기재현성, 방법검출한계(MDL) 등을 평가한 결과 방출시험장치와 분석기기의 조건은 안정적이고 재현성과 감도가 양호하여 액상 건축자재에서 방출되는 오염물질에 대한 측정 분석조건이 최적화되었음을 확인할 수 있었다. 페인트, 접착제, 실란트로 구성된 40개의 액상 건축자재를 대상으로 소형방출챔버와 방출셀을 이용하여 오염물질 방출시험을 실시한 결과 방출되는 총휘발성유기화합물의 농도는 소형 방출챔버와 방출셀에서 모두 대수정규분포(log normal distribution)하였으며 시험방법차이에 따른 방출량 분포의 차이는 크지 않았다. 또한 방출셀을 이용하여 오염물질 방출시험을 실시하였을 때, 소형방출챔버를 이용하였을 때보다 약 1.35~1.41배 높은 방출량을 나타내었으며 상관계수(r)가 약 0.91~0.97의 범위를 보여 높은 상관성이 있는 것으로 확인되었다.

Struvite 결정화 반응을 이용한 고온 소화 여과액의 N, P 처리 특성 (Treatment of N, P of Auto-Thermal Thermophilic Aerobic Digestion Filtrate with Struvite Crystallization)

  • 추연덕;김금용;류홍덕;이상일
    • 대한환경공학회지
    • /
    • 제33권11호
    • /
    • pp.783-789
    • /
    • 2011
  • 하수처리장에서 발생되는 잉여슬러지가 고온 호기 소화 반응을 거치면 슬러지부피가 크게 감소하게 된다. 그러나 고온 호기 소화 상등액에는 고농도의 유기물, 질소 및 인이 함유되어 있기 때문에 이들을 별도로 제거해 주어야만 한다. 본 연구에서는 고농도의 질소와 인의 제거에 많이 사용되는 방법인 Struvite 결정화 공법을 이용하여 고온 호기 소화 여액에 함유되어 있는 질소와 인을 제거하였다. 대상폐수의 암모니아성 질소와 인산염인의 평균농도는 각각 1716.5 mg/L 및 325.5 mg/L였다. 최적의 결정화 반응 조건을 결정하기 위하여 $Mg^{2+}$$PO_4^{3-}$의 주입량, pH, 교반 시간($t_d$), 교반 강도(G), 결정핵 주입 그리고 반응 온도를 결정하였다. Struvite 결정화 반응시 마그네슘원으로 $MgCl_2{\cdot}6H_2O$, 인산염인염의 원으로 $K_2HPO_4$를 이용하였다. 질소와 인의 제거를 위한 $Mg^{2+}:PO_4^{3-}:NH_4^+$의 적정 주입 몰비는 2 : 1 : 1과 2 : 2 : 1로 압축되었는데 각각의 주입 몰비에 따른 암모니아성 질소 및 인산염인의 제거효율은 전자의 경우에 각각 71.6% 및 99.9%였고, 후자의 경우에는 93.8%와 98.6%였다. Struvite 결정화 반응에서 반응 시간($t_d$)과 교반 강도(G)는 암모니아성 질소와 인산염인의 제거율에 큰 영향을 미치지 않았다. 또한 결정핵 주입과 온도의 영향에서도 같은 결과가 나타났다. 그러나 결정핵의 주입량이 증가함에 따라 슬러지 발생량이 감소하였으며, 온도의 증가에 따라 생성된 슬러지의 부피는 증가하는 것으로 나타났다.

플라스틱 고형 연료의 가스화 특성 (Characteristics of Gasification for a Refused Plastic Fuel)

  • 전영남;임문섭;조대영
    • 대한환경공학회지
    • /
    • 제37권11호
    • /
    • pp.636-641
    • /
    • 2015
  • 폐기물을 고체재생연료(SRF: Solid Refuse Fuel) 에너지로 전환하는 것은 화석에너지의 대체효과는 물론 온실가스 저감에도 기여한다. 그러나 플라스틱이 많이 함유한 SRF의 직접연소의 경우 검뎅(soot), 다이옥신 등의 생성문제가 있으므로 열분해/가스화 처리의 적용이 효과적이다. 본 연구에서는 플라스틱이 다량 함유된 SRF를 열분해 가스화의 특성을 파악하여 새로운 형태의 열분해 가스화 처리장치 개발을 위한 열적 기본자료을 제공하고자 한다. 이를 위해 새로이 벤치규모의 장치를 설계 제작하여, 설정된 일정 온도에서 공기비 변화에 대한 가스, 타르, 촤 생성특성에 대해 규명하였다. SRF 샘플 2 g, 가스화 공기비 0.691, 홀딩시간(Holding time) 32분일 때, 생성가스는 $H_2$ 1.36%, $CH_4$ 2.18%, CO 1.88%, $Cl_2$ 15.9 ppm, HCl 26.4 ppm로 생성되었으며, 중량타르(Gravimetric tar) $18g/Nm^3$와 경질타르는 Benzene $4.03g/m^3$, Naphthalene $0.39g/m^3$, Anthracene $0.11g/m^3$, Pyrene $0.06g/m^3$ 그리고 촤는 0.29 g 생성되었다.

지구의 나이: 재평가 (The Age of the Earth: Reappraisal)

  • 권성택
    • 암석학회지
    • /
    • 제23권3호
    • /
    • pp.273-277
    • /
    • 2014
  • 이 논문은 지구의 나이를 알기 위한 초기의 다양한 시도를 간략히 소개하고, 운석의 납동위원소 연대측정으로 처음으로 지구의 나이가 $4,550{\pm}70Ma$임을 밝힌 Patterson (1956)의 연구를 재조명한다. 태양계 초기의 진화과정은 성운가스가 식으면서 응축되어 만들어지는 고체입자 -> 이들 입자들이 서로 들러붙어 커지는 첨합과정을 통하여 행성 크기의 물체가 생성되는 것으로 생각되고 있다. 또한 이때 생긴 원시지구가 화성 크기의 물체와 충돌하면서 그 잔해가 달을 만들었다고 생각되고 있다. 이 일련의 과정에서 지구가 생성된 시기를 꼭 집어 말하기 힘들긴 하나, 현재 지구는 이 충돌의 직접적인 결과로 생각할 수 있기 때문에 이 충돌시기를 지구의 나이로 정할 것을 제안한다. 기존 연구를 고려하면 충돌시기는 태양계에서 가장 먼저 만들어진 운석물질의 나이(즉, 태양계의 나이) $4567.30{\pm}0.16Ma$와 지구와 달 암석에서 가장 오래된 나이 $4,456{\pm}40Ma$ 사이로 개략적으로 제한될 수 있다. 이 충돌시기는 태양계 초기 행성 크기의 물체가 만들어지는 시간간격을 밝히고, 충돌 이후 생성된 지구와 달의 마그마 바다의 열 역사를 규명하는데 매우 중요하기 때문에, 앞으로 보다 정확한 충돌시기를 측정하려는 노력이 요구된다.

척추관 분절운동을 제공하는 수직 상승 압력이 파킨슨병 환자의 증상 완화에 미치는 영향 (Effect of Vertically Rising Pressure Providing Spinal Canal Segment Motion on Symptom Relief in Patients with Parkinson's Disease)

  • 안도현;최현우;정경미;김나영;이종민
    • 한국방사선학회논문지
    • /
    • 제16권6호
    • /
    • pp.787-797
    • /
    • 2022
  • 본 연구는 온열·마사지 자극이 가능한 기계식 침대 적용을 통해 척추를 수직으로 자극하여, 파킨슨병의 통증 감소 및 증상 완화를 확인하고자 하였다. 이를 위해 파킨슨병 환자를 대상으로 의료용 조합자극 침대를 사용함에 따른 척추의 분절운동을 확인한 후 시각아날로그척도, 요통 기능 장애, 보행 능력, 나선형 그리기 검사를 실시하고 해당 변수 간의 관계를 파악하였다. 10일간의 시각아날로그척도, 요통 기능 장애 평가에서 침대 사용 후 평균이 감소하는 경향을 확인하였다. 보행 능력은 이동 시간의 감소와 이동 거리의 증가를 관찰하였다. 나선형 그리기 검사에서 침대 사용 후 검사 시간의 평균이 전보다 유의하게 낮았다. 그 결과, 기계식 온열 및 마사지로 척추 분절운동이 발생함에 따른 파킨슨병 환자의 회복 및 통증 완화를 위한 보조적인 방법으로 사용할 수 있는 가능성을 제시하였다. 그러나 본 연구는 예비적 연구로 피험자수가 적어 향후 피험자수와 상태를 세부적으로 고려한 추가적 연구가 필요하다.

전계 펄스 인가 증발 방법을 이용한 그라핀의 특성 연구 (Characteristics of graphene sheets synthesized by the Thermo-electrical Pulse Induced Evaporation)

  • 박혜윤;김현욱;송창은;지현준;최시경
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.412-412
    • /
    • 2009
  • Carbon-based nano materials have a significant effect on various fields such as physics, chemistry and material science. Therefore carbon nano materials have been investigated by many scientists and engineers. Especially, since graphene, 2-dimemsonal carbon nanostructure, was experimentally discovered graphene has been tremendously attracted by both theoretical and experimental groups due to their extraordinary electrical, chemical and mechanical properties. Electrical conductivity of graphene is about ten times to that of silicon-based material and independent of temperature. At the same time silicon-based semiconductors encountered to limitation in size reduction, graphene is a strong candidate substituting for silicon-based semiconductor. But there are many limitations on fabricating large-scale graphene sheets (GS) without any defect and controlling chirality of edges. Many scientists applied micromechanical cleavage method from graphite and a SiC decomposition method to the fabrication of GS. However these methods are on the basic stage and have many drawbacks. Thereupon, our group fabricated GS through Thermo-electrical Pulse Induced Evaporation (TPIE) motivated by arc-discharge and field ion microscopy. This method is based on interaction of electrical pulse evaporation and thermal evaporation and is useful to produce not only graphene but also various carbon-based nanostructures with feeble pulse and at low temperature. On fabricating GS procedure, we could recognize distinguishable conditions (electrical pulse, temperature, etc.) to form a variety of carbon nanostructures. In this presentation, we will show the structural properties of OS by synthesized TPIE. Transmission Electron Microscopy (TEM) and Optical Microscopy (OM) observations were performed to view structural characteristics such as crystallinity. Moreover, we confirmed number of layers of GS by Atomic Force Microscopy (AFM) and Raman spectroscopy. Also, we used a probe station, in order to measure the electrical properties such as sheet resistance, resistivity, mobility of OS. We believe our method (TPIE) is a powerful bottom-up approach to synthesize and modify carbon-based nanostructures.

  • PDF

HadGEM2-AO 모델이 모의한 AMOC 수십 년 변동 메커니즘 (A Mechanism of AMOC Decadal Variability in the HadGEM2-AO)

  • 위지은;김기영;이조한;부경온;조천호;김철희;문병권
    • 한국지구과학회지
    • /
    • 제36권3호
    • /
    • pp.199-209
    • /
    • 2015
  • 북대서양 자오면 순환(AMOC)은 그린란드 부근에서 고밀도 해수의 침강으로 유도되는데, 이것은 열과 물질을 수송시키기 때문에 기후 시스템의 중요한 요소이다. 이 연구는 전 지구 기후모델 중 하나인 HadGEM2-AO 모델에서 모의된 AMOC의 특징과 장기변동 메커니즘을 분석하였다. AMOC 지수를 이용한 지연 상관 분석을 통해 AMOC의 수십 년 변화는 해양 자체유지 변동으로 간주할 수 있었다. 즉 AMOC의 장기 변화는 남북 수온 경도와 해양 순환의 위상차로 인해 발생하는 불안정성에 의한 것으로 분석되었다. AMOC가 강해지면서 열의 북향 수송에 의해 남북 수온 경도가 작아지고, 따라서 해수의 순환과 열 수송이 줄어드는데, 이와 함께 고위도에서는 냉각이 유도되어 결과적으로 다시 AMOC가 강해지게 된다. 이 메커니즘은 저위도로부터 이류되는 열의 양에 따라 고위도 지역의 밀도 변화가 결정되기 때문에 AMOC의 변동을 염분 유도가 아닌 열적 유도 과정으로 이해할 수 있다.