• 자원환경지질
• /
• 제31권4호
• /
• pp.325-338
• /
• 1998

105 oriented samples (19 matrix samples, 86 cobble samples) were collected from the Silla Coglomerate Formation in Jinju and Goryeong areas to clarify the regional remagnetization of Cretaceous Kyongsang supergroup. Both the alternating field and thermal demagnetizations were conducted for the collected samples. The characteristic remanent magnetizations of these samples divided into three types in the Silla Conglomerate Formation: The ingredient magnetic minerals are magnetite, hematite, or both magnetite and hematite in a specimen. The characteristic remanent directions of cobble samples did not clustered to any direction. And the characteristic remanent directions of interbedded sandstones in the Silla Conglomerate Formation is $D/I=20.6^{\circ}/54.5^{\circ}$ (${\alpha}_{95}=11.1^{\circ}$, k=48.8) after tilting correction, agree with previous paleomagnetic studies on the Hayang group. These results implied that conglomerate test was passed indicating no regional remagnetization in the studied area after deposition of the Silla Conglomerate Formation.

• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1589-1597
• /
• 1997

The high-velocity impact forging process with eccentric loading condition is analyzed using the explicit time integration finite element method. In order to consider the strain hardening, strain rate hardening and thermal softening effects, which are frequently observed in high-velocity deformation phenomena, the Johnson-Cook constitutive model is applied to model the workpiece. It is assumed that the material response of the dies is elastic in the study. As a result of the eccentric loading simulation, it is found that the increase of the eccentric ratio and the allowable tilting angle cause the decrease of the maximum forging load and the blow efficiency, and it is also found that the forging load and the blow efficiency generated in the high-velocity impact forging process with three-dimensional geometry can be obtained efficiently.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1989년도 제9회 학술강연회초록집
• /
• pp.35-47
• /
• 1989

누설방지를 목적으로 산업용 기계에서 많이 사용되고 있는 기계평면시일(mechanical face seal)은 기능상 높은 신뢰도를 요구하고 있다. 이를 위하여 동적 안정성이 커야되고, 밀봉된 유체의 누설을 최소화시킬 수 있는 정도에서 시일의 수명을 결정해야 한다. 이와같이 상반된 성질을 동시에 만족시키기 위하여 시일 성능에 영향을 미칠 수 있는 기하학적 요인들을 고려하여 해석해야 한다. 일반적으로 미끄럼 접촉운동을 하고 있는 시일에서 시일링 간극(sealing gap)이 수 micron 단위라는 점을 고려할때 시일 조립시 중심맞추기(alignnment) 정미\ulcorner 결여 및 회전축의 자중량 등에 의한 기계적 변형(mechanical distortion), 특히 고온의 분위기에서 작동되고 있는 시일의 열변형(thermal distortion)은 시일의 경사집에 커다란 영햐을 주고 있다. 또한 누설을 최소화시킬 목적으로 시일 링(seal ring) 을 시일의 경사짐에 커다란 영향을 주고 있는 스프링의 강성도를 증가시키면 상대 미끄럼 운동을 하고 있는 접촉명이 건조마찰에 의한 마멸이 진행되어 코닝(coning)현상이 생긴다. 시일 평면에서 코닝 현상은 시일의 축방향 분리력(axial separtating force)과 경사 모우면트(tilting moment)에 커다란 영향을 주고 있는 것으로 알여졌다. 이들의 연구는 주로 경사진 시일평판에 시일근사치이논(seal approximation bhoryl)을 이용하여 1차원 비압축성에 관한 시월 성능을 해석하였다. 본 연구에서는 비압축성 유체의 점성이 온도에 의하여 변화를 일으키는 조건하에서 경사진 회전시일에 코닝이 발생되었을때 시일링 각극에서의 압력분포를 ㅈ차원인 경우에 대하여 수치적으로 해석을 하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.79-85
• /
• 2006

In this study, to increase the mixing between flue gas and reducing agent, new shapes of $NH_3$ ejection nozzles are designed and experimentally and numerically tested. The nozzles have six holes perpendicular to the ambient flue gas flow and the tilting angle between direction of ambient flow and the hole axis is varied. To evaluate the mixing efficiency of the proposed nozzles, numerical and experimental tests are applied to several flow conditions comparing with single hole nozzle, which is commonly used in conventional SCR process. From the results the nozzle with tilted multi-holes has the large region of high turbulent intensity compared with conventional single hole nozzle. This is originated from the high vorticity near the upstream of the jet flow issuing from the hole. The high turbulent intensity and vorticity magnitude lead to enhanced mixing between flue gas and reducing agent. Hence, the most suitable moral ratio between NOx and reducing agent for the catalytic reaction can be obtained on behalf of the intensified scalar mixing within shorter physical mixing length.

• 태양에너지
• /
• 제6권1호
• /
• pp.47-59
• /
• 1986

This paper presents the establishment of optimum design conditions and economic evaluation for solar hot water system. The aim of this study is to present thermal performance of solar heating systems and to determine their performance as a function of collector size, storage capacity, tilting of collector and other factors. By analyzing its performance under the various conditions, optimum design of solar heating system can be obtained. System performance are obtained monthly and yearly basis respectively. At the same time the economics of various systems are evaluated. For the computer simulation Mokpo, Kangnung, Chupungnyong and Seoul are selected for particular installation places. As a result, the optimal design condition of solar heating system considering the following factors such as installation angle of collector, capacity of storage tank, collector size in each place can be obtained as follows; (1) Installation angle of collector Tilt = lattitude (2) Capacity of storage tank Solar domestic hot water system : $45\;1/m^2$ Multifamily solar domestic hot water system : $35\;1/m^2$ (3) Collector size i) Solar domestic hot water system Seoul & Chupyungyong area : $11.52\;m^2$ Mokpo area : $8.64\;m^2$ ii) Multifamily solar domestic hot water system Seoul, Chupyungyong & Mokpo area : $345.6\;m^2$ Kangnung area : $259.2\;m^2$

• International Journal of Railway
• /
• 제1권3호
• /
• pp.113-116
• /
• 2008

The long-tenn exposure of polymeric composite materials to extreme-use environments, such as pressure, temperature, moisture, and load cycles, results in changes in the original properties of the material. In this study, the effect of combined environmental factors such as ultraviolet ray, high temperature and high moisture on mechanical and thermal analysis properties of glass fabric and phenolic composites are evaluated through a 2.5 KW accelerated environmental aging tester. The environmental factors such as temperature, moisture and ultraviolet ray applied of specimens. A xenon-arc lamp is utilized for ultraviolet light and exposure time of up to 3000 hours are applied. Several types of specimens - tensile, bending, and shear specimens that are warp direction and fill direction are used to investigate the effects of environmental factors on mechanical properties of the composites. Mechanical degradations for tensile, bending and shear properties are evaluated through a Universal Testing Machine (UTM). Also, storage shear modulus, loss shear modulus and tan a are measured as a function of exposure time through a Dynamic Mechanical Analyzer (DMA). From the experimental results, changes in material properties of glass fabric and phenolic composites are shown to be slightly degraded due to combined environmental effects.

• 자원환경지질
• /
• 제29권6호
• /
• pp.753-765
• /
• 1996

It is a well known fact that the remanent magnetization direction of the Tertiary rocks is deflected significantly clockwise (about $50^{\circ}$) in the Tertiary basins of the southeastern part of Korean peninsula. This fact has been interpreted as an evidence of north-south spreading of the East Sea (Sea of Japan) and dextral strike-slip motion of the Yangsan fault. As deflection (rotation) of remanent magnetizations is frequently reported from various regions of the world in the vicinities of strike-slip fault, such phenomena are to be expected in the Yangsan fault region also. It was the purpose of this study to clarify whether such premise is right or not. A total of 445 independently oriented core samples were collected from Cretaceous rocks of various lithology (sedimentary rocks, andesites and I-type granites) in the Yangsan fault area. In spite of through AF and thermal demagnetization experiments, no sign of remanent magnetization deflection was found. Instead, palaeomagnetic poles calculated from formation-mean ChRM directions are very similar to those of contemporary (Barremian, and late Cretaceous-Tertiary) sedimentary and plutonic rocks in the other parts of $Ky{\check{o}}ngsang$ basin as well as those of China. Therefore, possibility of tilting of granite plutons and horizontal block rotation of study area is excluded. It is also concluded that the Yangsan fault did not take any significant role in the Cenozoic tectonic evolution of southeast Korea and the East Sea region. The boundary between rotated and unrotated region of remanent magnetization is not the Yangsan fault line, but must lie further east of it.

• 자원환경지질
• /
• 제40권2호
• /
• pp.191-207
• /
• 2007

경상분지 이외의 지역에 분포하는 백악기 암석에 대한 특성잔류자화 방향을 이해하기 위하여 한반도 남서부에 분포하는 부여분지와 함평분지의 백악기 암석에 대한 고지자기 연구를 수행하였다. 부여분지에 분포하는 퇴적암의 고지 자기 방향은 경사보정전의 방향$(D/I=356.5^{\circ}/61.5^{\circ},\;k=39.3\;\alpha_{95}=7.4^{\circ})$은 경사보정후의 방향$(D/I=25.0^{\circ}/60.6^{\circ},\;k=22.4,\;\alpha_{95}=9.9^{\circ})$보다 더 집중됨으로 습곡 이후 재자화된 것으로 볼 수 있으나, 경사보정후의 방향의 정밀도(k)와 신뢰도$(\alpha_{95})$ 경사보정 전의 값과 비교하여 신뢰할 수 있는 통계학적으로 여전히 양호한 값이며 경사보정 후의 극의 위치가 한반도 백악기의 극의 위치와 유사한 점 때문에 부여분지의 재자화 여부의 결정은 유보하였다. 경사보정 전의 고지자기극의 위치는 $(Lat./Long.=81.6^{\circ}N/106.9^{\circ}E,\;K=25.1\;A_{95}=9.3^{\circ})$는 유라시아 제3기의 고지자기 극과 유사하며, 경사보정 후의 고지자기극은 $(Lat./Long.=69.3^{\circ}N/186.7^{\circ}E,\;K=11.6\;A_{95}=14.0^{\circ})$로 한반도 후기 백악기의 극과 유사하다. 함평분지 퇴적암의 특성잔류자화 방향은 경사보정 후의 방향$D/I=32.5^{\circ}/55.4^{\circ},\;(k=35.6,\;\alpha_{95}=8.7^{\circ})$이 경사보정 전의 방향$D/I=18.3^{\circ}/62.5^{\circ},\;k=14.1,\;\alpha_{95}=14.2^{\circ})$보다 더 집중된다. 경사보정 후의 방향으로부터 계산된 고지자기극의 위치는 $Lat./Long.=63.9^{\circ}N/202.7^{\circ}E,\;(K=21.3,\;A_{95}=7.6^{\circ})$로 한반도 후기 백악기의 고지자기극$(Lat./Long.=70.9^{\circ}N/215.4^{\circ}E,\;A_{95}=5.3^{\circ})$의 위치와 유사하므로 암석의 생성 시기는 후기 백악기로 판단하였다. 한편 함평분지에 분포하는 백악기 화산암류에서는 한 개의 정자화 방향과 두 개의 역자화 방향이 확인되었다. 이들 특성잔류자화 방향은 백악기 화산암 형성 당시 암석에 기록된 성분으로써 당시 지구자기장의 상태를 기록한 것으로 해석하였으며, 이중 정자화 방향을 함평분지 화산암의 대표 방향으로 채택하였다 함평분지 화산암의 고지자기 극의 위치는 정자극의 경우는 $Lat./Long.=70.2^{\circ}N/199.5^{\circ}E,\;(K=18.1,\;A_{95}=9.6^{\circ})$ 이며 역자극의 경우는 $Lat./Long.=65.5^{\circ}S/251.3^{\circ}E,\;(K=7.1,\;A_{95}=20.7^{\circ})$이다. 이중 정자극의 위치는 한반도의 후기 백악기극의 위치와 통계적으로 동일한 것으로 나타나 함평분지 화산암의 형성 시기를 후기 백악기로 해석하였다.