• Journal of Welding and Joining
• /
• 제7권4호
• /
• pp.46-55
• /
• 1989

Zirconia coatings are performed by the plasma spraying on the substrate of Al-Si alloy. In case of plasma sprayed ceramic coatings, it is important to control properly residual stress occurred during cooling process. Residual stress in coating layer varies with sprayed conditions and is influenced greatly by the coating layer thickness. Surface residual stress due to coating layer thickness is measured by X-ray diffraction method and the residual stress in coating layer is estimated by the deflection of coating layer when the restraint force in substrate was removed. When zirconia was coated on the substrate, tensile residual stress remains on zirconia coated surface layer. The tensile stress is increased to 0.35mm thickness and after 0.45mm thickness it is decreased abrouptly. A thick bond and composite coating reduce the zirconia surface stress and composite coating controls effectively the thick zirconia surface stress.

• 대한기계학회논문집A
• /
• 제38권8호
• /
• pp.857-862
• /
• 2014

하드페이싱층과 기저부의 결합부에서 발생하는 잔류 응력/변형률을 감소시키기 위하여 열응력제어층에 대한 연구가 시작되고 있다. 이 연구에서는 3 차원 유한요소해석을 이용하여 Stellite21 초합금으로 하드페이싱된 STD61 열간금형강의 중간층으로 형성된 열응력제어층의 재료조합과 두께를 예측하고자 한다. 열응력제어층은 Stellite21 과 STD61 의 조합으로 생성하였다. 열응력제어층의 두께범위는 0.5-1.5 mm 로 선정하였다. 유한요소해석 결과를 이용하여 열응력제어층을 구성하는 Stellite21과 STD61의 혼합율 및 열응력제어층 두께에 따른 시편 내부 온도/열응력/열변형률분포를 정량적으로 분석하였다. 이 결과로부터 적합한 열응력제어층의 재료혼합비는 Stellite21 50 % 와 STD61 50 % 이며, 적절한 열응력제 어층의 두께는 1.0 mm 임을 알 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권1호
• /
• pp.14-18
• /
• 2014

The mechanical, electrical and thermal characteristics of insulating materials may significantly affect the performance and reliability of electrical devices using superconductors. General method to provide insulating layer between coated conductors is wrapping coated conductor with Kapton tape. But uniform and compact wrapping without failure or delamination in whole coverage for long length conductor is not a simple task and need careful control. Coating of insulating layer directly on coated conductor is desirable for providing compact insulating layer rather than wrapping insulating layers around conductor. Ceramic added polymer has been widely used as an insulating material for electric machine because of its good electrical insulating properties as well as excellent heat resistance and fairy good mechanical properties. The insulating layer of coated conductor should have high breakdown voltage and possesses suitable mechanical strength and maintain adhesiveness at the cryogenic temperature where it is used and withstand stress from thermal cycling. The insulating and mechanical properties of polymer can be improved by adding functional filler. In this study, insulating layer has been made by adding ceramic particles such as $SiO_2$ to a polymer resin. The size, amount and morphology of added ceramic powder was controlled and their effect on dielectric property of the final composite was measured and discussed for optimum composite fabrication.

• 한국정밀공학회지
• /
• 제31권8호
• /
• pp.653-658
• /
• 2014

Roll-to-Roll printing process has become a great issue as a breakthrough for low cost and mass production of electronic devices such as organic thin film transistor, and etc. To print the electronic devices, multi-layer printing is essential, and high precision register control is required for this process. Unlike stop-and-repeat printing process, it is impossible to control the register in a static state since the roll-to-roll process is a continuous system. Therefore, the behavior of web such as polyethylene terephthalate (PET) and polyimide (PI) by the tensile and thermal stress generated in the roll-to-roll process as well as motor control of driven rolls has to be considered for a high precision register control. In this study, the correlation between curing temperature and thermal deformation of PET web is analyzed. Finally, it is verified experimentally that the temperature disturbance generates the more serious register error under the higher curing temperature.

• 대한의용생체공학회:의공학회지
• /
• 제44권1호
• /
• pp.85-91
• /
• 2023

Stress urinary incontinence (SUI) occurs when abdominal pressure increases, such as sneezing, exercising, and laughing. Surgical and non-surgical treatments are the common methods of SUI treatment; however, the conventional treatments still require continuous and invasive treatment. Laser have been used to treat SUI, but excessive temperature increase often causes thermal burn on urethra tissue. Therefore, the optimal conditions must be considered to minimize the thermal damage for the laser treatment. The current study investigated the feasibility of the laser irradiation condition for SUI treatment using non-ablative 980 nm laser from a safety perspective through numerical simulations. COMSOL Multiphysics was used to analyze the numerical simulation model. The Pennes bioheat equation with the Beer's law was used to confirm spatio-temporal temperature distributions, and Arrhenius equation defined the thermal damage caused by the laser-induced heat. Ex vivo porcine urethral tissue was tested to validate the extent of both temperature distribution and thermal damage. The temperature distribution was symmetrical and uniformly observed in the urethra tissue. A muscle layer had a higher temperature (28.3 ℃) than mucosal (23.4 ℃) and submucosal layers (25.5 ℃). MT staining revealed no heat-induced collagen and muscle damage. Both control and treated groups showed the equivalent thickness and area of the urethral mucosal layer. Therefore, the proposed numerical simulation can predict the appropriate irradiation condition (20 W for 15 s) for the SUI treatment with minimal temperature-induced tissue.

• 한국기계가공학회지
• /
• 제4권4호
• /
• pp.34-38
• /
• 2005

This is a widespread requirement for low cost lightweight thermal imaging sensors for both military and civilian applications. Today, a large number of uncooled infrared detector developments are under progress due to the availability of silicon technology that enables realization of low cost IR sensor. System prices are continuing to drop, and swelling production volume will soon drive process substantially lower. The feasibility of micromechanical optical and infrared (IR) detection using microcantilevers is demonstrated. Microcantilevers provide a simple Structurefor developing single- and multi-element sensors for visible and infrared radiation that are smaller, more sensitive and lower in cost than quantum or thermal detectors. Microcantilevers coated with a heat absorbing layer undergo bending due to the differential stress originating from the bimetallic effect. This paper reports a micromachined silicon uncooled thermal imager intended for applications in automated process control. This paper presents the design, fabrication, and the behavior of cantilever for thermomechanical sensing.

• Advances in concrete construction
• /
• 제9권5호
• /
• pp.459-467
• /
• 2020

Mechanical and thermal properties of composite sandwich wall panels are affected by changes in their external environment. Humidity and temperature changes induce stress on wall panels and their core connectors. Under the action of ambient temperature, temperature on the outer layer of the wall panel changes greatly, while that on the inner layer only changes slightly. As a result, stress concentration exists at the intersection of the connector and the wall blade. In this paper, temperature field and stress field distribution of UHPC-RW-RC (Ultra-High Performance Concrete - Rock Wool - Reinforced Concrete) wall panel under high temperature-sprinkling and heating-freezing conditions were investigated by using the general finite element software ABAQUS. Additionally, design of the connection between the wall panel and the main structure is proposed. Findings may serve as a scientific reference for design of high performance composite sandwich wall panels.

• 마이크로전자및패키징학회지
• /
• 제22권3호
• /
• pp.51-56
• /
• 2015

솔더 조인트의 신뢰성 강화를 위해서 다양한 pad finish material이 사용되고 있으며, 최근에는 Electroless Ni Electroless Pd Immersion Gold (이하 ENEPIG) pad가 많이 사용되고 있다. 따라서, 본 연구는 상용화 되어 사용중인 Electrolytic Ni (soft Ni) pad와 최근 이슈가 되고 있는 ENEPIG pad에 대한 신뢰성 평가에 관한 것으로, 다양한 Cu 함량에 따른 거동을 관찰 하였다. Reflow 후 솔더와 pad간의 접합층은 $Cu_6Sn_5$에 Ni이 치환된 형태의 금속간 화합물로 구성되어 있었으며, ENEPIG pad의 경우, 접합층과 Ni layer 사이에 $Ni_3P$ (dark layer) layer가 관찰 되었다. 또한, Cu 함량에 따라 Dark layer의 두께를 제어할 수 있었다. 충격 낙하 시험 후, 파괴모드를 관찰한 결과 soft Ni pad와 ENEPIG pad에서 서로 다른 파괴모드가 관찰 되었으며, soft Ni의 경우, 1차 IMC와 2차 IMC 경계에서 파괴가 관찰 되었고, ENEPIG pad의 경우, dark layer에서 파괴가 관찰 되었다. IMC와 pad material, bulk 솔더와의 lattice mismatch에 의해 불안정한 계면이 존재하며, 이는 연속적인 외부 충격에 의해 가해진 열적, 물리적 스트레스를 IMC 계면으로 전송하기 때문에, 솔더의 신뢰성 향상을 위해서는 솔더 벌크의 제어와 IMC의 두께 및 형상의 제어는 필요하다.

• 한국세라믹학회지
• /
• 제42권8호
• /
• pp.554-560
• /
• 2005

The engineering ceramic needs the properties of high strength, hardness, corrosion-resistance and heat-resistance in order to withstand thermal shock or applied nonuniform stresses without failure. The densely coated porous ceramics can be used for machine component, electromagnetic component, bio-system component and energy-system component by their high-performances from superior coating properties and light-weight characteristics due to the structure including pore by itself. In this study we controlled the porosity of silica and alumina, $8.2\~25.4\%$ and $23.4\~36.0\%$, respectively, by the control of sintering temperature and starting powder size. We made bilayer structures, consisting of a transparent glass coating layer bonded to a thick substrate of different porous ceramics by a thin layer of epoxy adhesive, facilitated observations of crack initiation and propagation. The elastic modulus mismatch could be controlled using different porous ceramics as the substrate layer. Then we applied 150 N force using WC sphere with a radius of 3.18 mm by Hertzian indentation. As a result, the crack initiation in the coating layer was delayed at lower porosity in the substrate layer, and the damage in the coating layer was relatively smaller at the bilayer structure coated on higher elastic substrate.

• 한국안전학회지
• /
• 제9권1호
• /
• pp.146-154
• /
• 1994

A series of numerical calculations are performed in order to investigate the dispersion mechanism of toxic gaseous and solid pollutants in extremely short-term and short range. The calculations are carried out in an open space characterized by turbulent boundary layer. The simulation is made by the use of numerical model, in which a control-volume based finite difference method is used together with the SIMPLEC algorithm for the resolution of the pressure-velocity coupling problem. The Reynolds stresses are solved by two-equation, k-$\varepsilon$ model modified for buoyancy. The major parameters consider-ed in this study are temperature, velocity and Injection height of toxic gases, environmental conditions such as temperature and velocity of free stream air, and topographic factor. The results are presented and discussed in detail. The flow field is commonly characterized by the formation of a strong recirculation zone due to the upward motion of the hot toxic gas and ground shear stress. The driving force of the upward motion is explained by the effect of thermal buoyancy of hot gas and the difference of inlet velocity between toxic gas and free stream.