• 신재생에너지
• /
• 제17권3호
• /
• pp.1-7
• /
• 2021

The Korean government announced various energy policies, such as the to reduce 37% of the business-as-usual (BAU) greenhouse gas emissions by 2030. The policies aim to increase the renewable electricity generation ratio to 20% by 2030. PVT is a hybrid technology, which combines photovoltaic (PV) and solar collectors. It is capable of generating electricity and thermal energy simultaneously. It has a great potential to be used as a renewable and clean solar energy. However, there exists a shortage of space for the installation of PVT systems in Korea. To overcome this, in this paper proposes four types of soundproof wall PVT air channels, which were designed and optimized, based on the CFD (Computation Fluid Dynamic) analysis results. The thermal energy generation for multiple PVT units connected in series and pressure drop sensitivity were analyzed, depending on inlet velocity.

• 정보저장시스템학회논문집
• /
• 제2권3호
• /
• pp.208-213
• /
• 2006

The present state of the design of swing arm actuators for optical disc drives is to obtain the high efficient dynamic characteristics within a very compact volume. As a necessary consequence, the need of the small form factor (SFF) storage device has been arisen as major interests in the information storage technology. In this paper, we suggest the miniaturized swing arm type actuator that has high efficient dynamic characteristics for SFF optical disk drive (ODD). For the operating mechanism, it uses a tracking electromagnetic (EM) circuit for a focusing motion together. Moreover, due to the size constraint, the thermal stability of optical head is important. Therefore, the actuator is designed to emit the heat, which is generated by optical pick-up, along the actuator body easily. Initial model is designed based on the topology optimization method considering the thermal conductivity. Then, the structural parts of the actuator are modified to maintain the high sensitivity and to have wide control bandwidth by the design of experiments method (DOE) and new concept of decreasing mass and inertia. Finally, a swing arm type actuator for SFF ODD is suggested and its dynamic characteristics are verified.

• 한국압력기기공학회 논문집
• /
• 제19권2호
• /
• pp.109-116
• /
• 2023

This study presents a CRUD modelling to simulate the thermal resistance behavior of CRUD, deposited on the surface of a cladding tube of a fuel assembly. When heat produced from fuels transfers to a coolant through a cladding tube, the CRUD acting as an additional thermal resistance is expressed as two layers, i.e., a solid oxide layer and an imaginary fluid layer, which are added to the experimental tube's heat structure of the MARS-KS input data. The validation calculation for the experiments performed in UNIST-DISNY facility showed that the center and surface temperatures of the cladding tube increased as the porosity and the steam amount inside pores of the CRUD got higher. In addition, the temperature gradient in the imaginary fluid layer was calculated to be larger than that in the solid oxide part, indicating that the steam amount inside the layer acted more largely as thermal resistance. It was also evaluated through sensitivity calculations that the cladding tube temperature was more sensitive to the CRUD porosity and the steam amount in pores than to the inlet flow rate of the coolant.

• Transactions on Electrical and Electronic Materials
• /
• 제4권3호
• /
• pp.10-14
• /
• 2003

In this paper, we have introduced the x-ray detector built with a CsI:Na scintillation layer deposited on amorphous selenium. To determine the thickness of the CsI:Na layer, we have estimated the transmission spectra and the absorption of continuous x-rays in diagnostic range by using computer simulation (MCNP 4C). A x-ray detector with 65 ${\mu}m$-CsI:Na/30 ${\mu}m$-Se layer has been fabricated by a thermal evaporation technique. SEM and PL measurements have been performed. The dark current and x-ray sensitivity of the fabricated detector has been compared with that of the conventional a-Se detector with 100 ${\mu}m$ thickness. Experimental results show that both detectors exhibit a similar dark current, which was of a low value below $400 pA/cm^2$ at 10 V/${\mu}m$. However, the CsI:Na-Se detector indicates high x-ray sensitivity, roughly 1.3 times that of a conventional a-Se detector. Furthermore, a CsI:Na-Se detector with an aluminium reflective layer shows a 1.8 times higher x-ray sensitivity than an a-Se detector. The hybrid type detector proposed in this work exhibits a low dark current and high x-ray sensitivity, and, in particular, excellent linearity to the x-ray exposure dose.

• 마이크로전자및패키징학회지
• /
• 제24권1호
• /
• pp.57-65
• /
• 2017

모바일 기기 내부에 있는 전자부품들은 반도체 칩이나 그 밖의 여러 가지 재료로 구성되어 있다. 이러한 전자부품들은 매우 얇고, 구성된 재료들은 다양한 열팽창 계수를 가지고 있으므로 온도 변화나 외부 하중에 의해서 쉽게 굽힘이 일어난다. 그림자 무아레 방법은 비접촉으로 전체 영역에 걸친 면외변위를 측정하는 광학적 방법이지만 측정 감도를 $50{\mu}m/fringe$ 이내로 하기 어려워서 반도체 패키지의 굽힘변형을 측정하기에는 적당하지 않은 면이 있었다. 본 논문에서는 그림자 무아레 기법의 여러 실험조건들을 최적화하여 $25{\mu}m/fringe$의 향상된 감도를 갖는 측정 방법을 구현하였다. 또한 이로부터 위상이동에 의해 기록되는 4장의 그림자 무늬를 영상 처리하여 감도가 4배 향상된 그림자 무늬를 얻어내고 이를 스마트폰의 소형 전자부품들에 적용하여 온도변화에 따라 발생하는 굽힘 변위를 $5{\mu}m/fringe$의 고감도로 측정하였다.

• Tribology and Lubricants
• /
• 제40권2호
• /
• pp.39-46
• /
• 2024

The Morton effect (ME) is an instability phenomenon occurring in rotating machineries supported by fluid film bearings and is induced by the thermal deformation of the overhung mass, which is a part of the rotating shaft. Herein, we describe the ME during the high-speed balancing test of a 20 MW class steam turbine. Additionally, to predict the rotating speed at which the ME occurs, we apply the sensitivity vector theory for the steam turbine. During the operation of the steam turbine, we observe a continuous increase in vibration and hysteresis near the rated speed, which is typical of the ME. Increasing the temperature of the lubricating oil supplied to the bearings from 40 to 60℃ suppresses the occurrence of the ME. The rotordynamic analysis for the steam turbine suggests the existence of a mode in which the overhung mass undergoes significant deformation near the rated speed, and we presume that such a mode will increase the occurrence of the ME. The predicted rotating speed of ME occurrence, obtained through the sensitivity vector method, correlates with the test results. Moreover, increasing the temperature of the supplied lubricating oil mitigates the occurrence of ME by reducing the sensitivity between the temperature deviation vector and unbalance mass vector.

• Progress in Superconductivity
• /
• 제11권2호
• /
• pp.152-157
• /
• 2010

We have fabricated the low noise liquid helium(LHe) dewar with a different shape of thermal shield to apply the 64-channel SQUID(Superconducting Quantum Interference Device) gradiometer. The first shape of thermal shield was made of an aluminum plate with a wide width of 100 mm slit and the other shape was modified with a narrow width of 20 mm slit. The two types of dewars were estimated by comparing the thermal noise and the signal-to-noise ratio(SNR) of magnetocardiography(MCG) using the $1^{st}$ order SQUID gradiometer system cooled each dewar. The white noise was different as a point of the dewar. The noise was increased as close as the edge of dewar, and also increased at the thermal shield with the more wide width slit. The white noise of the dewar with thermal shield of 100 mm slit was 6.5 fT/$Hz^{1/2}$ at the center of dewar and 25 fT/$Hz^{1/2}$ at the edge, and the white noise of the other one was 3.5 - 7 fT/$Hz^{1/2}$. We measured the MCG using 64-channel SQUID gradiometer cooled at each LHe dewar and compared the SNR of MCG signal. The SNR was improved of 10 times at the LHe dewar with a modified thermal shield.

• 센서학회지
• /
• 제18권5호
• /
• pp.402-407
• /
• 2009

In this study, plastic optical fiber sensors which can measure thermal neutron dose in a mixed neutron-gamma field are developed and characterized. Using $^{252}Cf$ and $^{60}Co$ sources, the scintillators suitable for thermal neutron detection, are tested and the scintillating lights generated from a plastic optical fiber sensor in the Kyoto University Critical Assembly (kuca) core are measured. Also, the distributions of thermal neutron and gamma-ray are measured in a mixed field as a function of the distance from the center of the reactor core at KUCA and the distribution of thermal neutron is obtained using a subtraction method. Sensitivity of the fiber-optic radiation sensor system is about 0.49 V/mW according to power of the KUCA core and its relative error is about 1.2 %.

• 항공우주시스템공학회지
• /
• 제18권2호
• /
• pp.71-78
• /
• 2024

초기 열설계 과정의 경우 복잡한 궤도 열 환경 조건에서 다양한 설계 변수에 따른 열적 영향성 판단을 해야 하므로, 열 설계/분석에 많은 시간이 소요된다. 따라서, 초기 설계 단계에서 시간을 효율적으로 단축시키기 위해서는 최적의 설계 변수 도출과 이에 따른 온도 예측이 신속히 이루어져야 한다. 상기 문제점에 기인하여 차수축소모델을 활용한 최적 설계 전문 소프트웨어인 Veritrek이 2018년에 출시되었다. 본 논문에서는 Veritrek 소프트웨어를 활용하여 그라파이트시트 기반 냉각기 열 제어 시스템에 대해 차수축소모델 구축과 민감도 분석, 최적 설계 분석을 수행하여 냉각기의 허용온도를 만족할 수 있는 그라파이트시트의 적층 수, 방열판 면적 및 두께에 대한 최적설계 수치를 도출하였다.

• 한국강구조학회 논문집
• /
• 제17권5호통권78호
• /
• pp.519-526
• /
• 2005

혹서기에 레일의 높은 온도 상승(최대 $60^{\circ}C$)으로 인해 장대레일 궤도에는 매우 큰 압축력이 작용하게 된다. 이러한 압축력은 장대레일 궤도의 좌굴을 발생시키기도 한다. 본 연구에서는 장대레일 궤도의 좌굴에 영향을 미치는 많은 요소들 중에서 도상 횡저항력 그리고 도상 종저항력이 궤도 좌굴에 미치는 영향을 파악하기 위한 연구를 수행하였다. 또한 줄틀림과 궤간틀림의 민감도를 분석하였다.