• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.241-241
• /
• 2014

$SnO_2-core/Zn-shell$ heteronanowires were fabricated by a two-step process: thermal evaporation of Sn powders and employing a sputtering technique with a Zn target. X-ray diffraction, high-resolution transmission electron microscopy, and EDX spectra coincidentally indicated that the shell layer comprised the Zn phase. From Gaussian deconvolution studies, we observed that photoluminescence (PL) spectra consisted of yellow, green, and ultraviolet (UV) emission bands, regardless of shell-coating. We speculated the possible mechanisms of these emission peaks.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.80.1-80.1
• /
• 2011

It is well known that chromospheric features are fine structured, short lived, and dynamic. Spectrograph-based observation have obvious advantage of getting physical properties of solar chromosphere than filter-based one. We developed and installed Fast Imaging Solar Spectrograph (FISS) attached on New Solar Telescope in Big Bear Solar Observatory. FISS have capabilities to take data with high time, spatial and spectral resolution at two wavelengths(Ha $6563{\AA}$ and CaII $8542{\AA}$) simultaneously. After FISS installation, we observed various chromospheric features : active regions, quiet regions, filaments/prominences and so on. As one of chromospheric studies, we analyzed solar prominences and got physical parameters by using simple radiative transfer modeling. The ranges of temperature and non-thermal velocities are found to be 7500-13000K and 5-11km/s, respectively.

• Steel and Composite Structures
• /
• v.5 no.6
• /
• pp.421-441
• /
• 2005

The present work reports on a numerical simulation of a compartment fire. The fire was modeled using a simplified approach, where combustion is simulated as a volumetric heat release. Computations were performed with the commercial code CFX 5.6. Radiation was modeled with a differential approximation (P1 model), while turbulence effects upon the mean gas flow were dealt with a SST turbulence model. Simulations were carried out using a transient approach, starting at the onset of ignition. Results are provided for the temperature field time evolution, thus allowing a direct comparison with the analytical and experimental data. The high spatial resolution available for the results proved to be of great utility for a more detailed analysis of the thermal impact on the steel structure.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.964-968
• /
• 2008

Infrared thermography using high-speed infrared camera has been recognized as a powerful method for various potential applications, such as nondestructive inspection, failure analysis, stress analysis, and medical fields, due to non-contact, high-speed, and high spatial resolution at various temperature ranges. In this investigation, damage evolution due to generation of hot spots on railway brake disc was investigated using the infrared thermography method. A high-speed infrared camera was used to measure the surface temperature of brake disc as well as for in-situ monitoring of hot spot evolution. From the thermographic images, the observed hot spots and thermal damage of railway brake disc during braking operation were qualitatively analyzed. Moreover, in this investigation, the previous experimental and theoretical studies on hot spots phenomenon were reviewed, and the current experimental results were introduced and compared with theoretical prediction.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.20-20
• /
• 2003

A new and simple method has been developed to synthesize highly crystalline and monodisperse maghemite (γ-Fe₂O₃) and zirconia (ZrO₂) nanocristallites. High temperature aging of metal-surfactant complex was founded to generate monodisperse nanoparticles, wherein the nuclei were prepared by the thermal decomposition of iron-oleate complex in case of iron oxide and nonhydrolytic sol-gel reaction in case of zirconia respectively. By varying the experimental conditions, in other words concentration of surfactants, kind of metal precursor, reaction temperature and so on, the diameter of spherical nanoparticles could be controlled at various size. The synthesized nanoparticles were characterized by electron diffraction, X-ray diffraction, and low- and high-resolution transmission electron microscope.

• Applied Science and Convergence Technology
• /
• v.23 no.3
• /
• pp.113-127
• /
• 2014

For more than five decades, silicon has dominated the semiconductor industry that supports memory devices, ICs, photovoltaic devices, etc. Photoluminescence (PL) is an attractive silicon characterization technique because it is contactless and provides information on bulk impurities, defects, surface states, optical properties, and doping concentration. It can provide high resolution spectra, generally with the sample at low temperature and room-temperature spectra. The photoluminescence properties of silicon at low temperature are reviewed and discussed in this study. In this paper, silicon bulk PL spectra are shown in multiple peak positions at low temperature. They correspond with various impurities such as In, Al, and Be, phonon interactions, for example, acoustical phonons and optical phonons, different exciton binding energies for boron and phosphorus, dislocation related PL emission peak lines, and oxygen related thermal donor PL emissions.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.38.1-38.1
• /
• 2011

Bright rims are one of the most unknown part of a filament nowadays. Many models tried to explain the environments, but there is no commonly acceptable model. Many survey observations have been performed to find various characteristics of the bright rim statistically, but there was only one spectroscopic observation to understand phenomena of the bright rim. We observed a bright rim on June 25, 2010 using FISS installed in NST, Big Bear Solar observatory. FISS can obtain a couple of wavebands data simultaneously with short time cadence and fine resolution(~ 0.1", expected) with Adaptive Optics. By applying the cloud model, we found source function, optical thickness, temperature and non-thermal velocity of the region from the spectra of Ha and CaII 8542 lines. We discuss the physical implication of these measurements on the nature of bright rims of filaments.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.31 no.10
• /
• pp.109-115
• /
• 1982

Reactor dynamics were studied by reactor noise at TRIGA MARK Il reactor whose rated power is 250KW thermal. The power spectral densities(PSD) of the noise were measured by stochastic method with high resolution digital filters and Fast Fourier Transformers. The transfer function of the reactor at zero power was identical to the theoretical characteristics. When the power was increasec above 1KW, reactor showed its poswer resonances at 3Hz and 10 Hz. It was analyzed that 3Hz peak was generated by heat transfer and coolant flow effects and 10Hz peak by nuclear reaction effects.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.324-327
• /
• 2010

최근 카메라 센서는 ISP(Image Signal Processor)를 별도로 사용하지 않고 SOC(System on Chip) 방식으로 설계를 하여 소형화를 추구하고 있지만, High Resolution의 카메라가 개발 요구되어지면서 센서 Pixel 및 스위칭 트랜지스터의 집적화가 심화되고 있다. 이러한 고집적화는 카메라 센서 내 발열 관리에 대한 관심을 높여주고 있다. 본 논문에서는 우선 SOC 센서가 ISP를 탑재한 센서이므로 프로세서 발열 관리 기법에 대해 먼저 소개를 한 후, SOC 방식 센서를 대상으로 열이 발생되는 관련 조건을 확인 검사하고, 분석한 결과를 보인다. 또한 이러한 분석 결과를 토대로 발열을 제어 할 수 있는 방법으로 DAC(Digital Analog Converter)를 사용하여 센서 내 사용되는 전류 증폭을 최소화 한 설계 방식에 대해 분석해 보았으며, 전류 증폭을 최소화한 결과 최대 PCLK(Pixel Clock)에서도 열화에 따른 Noise(Hot Pixel)를 개선시킬 수 있었다.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.172-174
• /
• 2003

Using MODIS data and several different compositing algorithms utilizing the average cloud free days in a compositing period, maximum ndvi, or dual maximum NDVI/minimum blue, multi resolution composites (250m, 500m, 1km) have been produced for Southeast Asia, with spectral bands ranging from the visible to short-wave infrared with a single band in the thermal (for land and sea surface temperature). A total of nine composites have been produced for the months of May and August in 2003, including blue, green, red, NIR, three in the SWIR, and several to specifically monitor vegetation health.