• 조명전기설비학회논문지
• /
• 제23권2호
• /
• pp.125-130
• /
• 2009

일본 도야코에서 2008년 7월 열린 G8 정상회의에서 2050년까지 전세계 온실가스 배출량을 절반으로 줄이는 장기 목표를 추진하는 방안이 논의되었다. 우리나라도 2013년부터 기후협약 규제가 거의 확실시되고 있다. 화석연료의 연소로 대부분의 전력을 생산하는 발전산업은 우리나라 $CO_2$ 대기배출량의 20[%] 이상을 차지하고 있다. 발전소의 화석연료의 소모와 이에 따른 $CO_2$ 대기배출 규제는 갈수록 엄격해 질 전망이며 전력생산단가에 크게 영향을 끼칠 것이다. 본 논문은 발전소의 연료교체 검토 시 $CO_2$ 배출비용을 감안하는 간단한 경제성 검토를 수행하였다. 중유전소 발전소인 D 발전소가 LNG로 연료전환을 고려할 경우, 발전비용이 같아지는 ton당 $CO_2$ 배출비용, 즉, LNG-중유 연료교체의 손익분기점에 해당하는 ton당 $CO_2$ 배출비용을 계산하는 방법과 예제를 제시하였다. 이를 위하여 D 발전소의 성능시험 결과 얻어진 입출력 특성계수를 이용하였다.

• KEPCO Journal on Electric Power and Energy
• /
• 제6권4호
• /
• pp.455-460
• /
• 2020

In order to identify the characteristics of fine particle emissions from thermal power plants, this study conducted measurement of the primary emission concentration of TPM, PM₁₀ and PM_2.5 according to Korea standard test method (ES 01301.1) and ISO 23210 method (KS I ISO 23210). Particulate matters were sampled in total 74 units of power plants such as 59 units of coal-fired power plants, 7 units of heavy oil power plants, 2 units of biomass power plant, and 6 units of liquid natural gas power plants. The average concentration of TPM, PM₁₀, PM_2.5 by fuel are 3.33 mg/m³, 3.01 mg/m³, 2.70 mg/m³ in coal-fired plant, 3.02 mg/m³, 2.99 mg/m³, 2.93 mg/m³ in heavy oil plant, 0.114 mg/m³, 0.046 mg/m³, 0.036 mg/m³ in LNG plant, respectively. These results of TPM, PM₁₀ and PM_2.5 were satisfied with the standards of fine dust emission allowance in all units of power plants, respectively. Also, this study evaluated the characteristics of fine particle emissions by conditions of power plants including generation sources, boiler types and operation years and calculated emission factors and then evaluated fine particle emissions by sources of electricity generation.

• 한국환경과학회지
• /
• 제13권7호
• /
• pp.703-710
• /
• 2004

Petroleum refineries have been considered as an important emission source for atmospheric volatile hazardous air pollutants(HAPs). The emission source includes petroleum refinery processes and process equipment. The control strategy for volatile HAPs requires emission estimations of these pollutants. However, systematic methods of volatile HAPs emission from petroleum refineries have not yet been established. Accordingly, present study surveyed the estimation method of volatile HAPs emitted from the petroleum refinery processes and process equipment. The emission estimation methods for the petroleum refinery processes are applied for 11 petroleum refining facilities: fluidized catalytic cracking, thermal cracking, moving bed catalytic cracking, compressed engine, blowdown system, vacuum distilled column condensator, natural gas or distilled boiler, natural gas or distilled heater, oil boiler, oil heater and flare. Four emission estimation methods applied for the petroleum refinery process equipment are as follows: average emission factor approach, screening ranges approach, EPA correlation approach and unit-specific correlation approach. The process equipment for which emission factors are available are valves, pump seals, connectors, flanges and open-ended lines.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1499-1502
• /
• 2005

Dense $BaMgAl_{10}O_{17}:Eu^{2+}$ phosphor particles with a spherical shape have been synthesized through spray pyrolysis method using basic aluminum nitrate precursor as a spray solution. This $BaMgAl_{10}O_{17}:Eu^{2+}$ particles prepared by the spray pyrolysis have shown the stronger emission intensity compared to the commercially-available $BaMgAl_{10}O_{17}:Eu^{2+}$. However, thermal stability of the BAM:Eu b lue phosphor is very poor due to changing from $Eu^{2+}$ to $Eu^{3+}$ at the thermal process, so brightness of the phosphor decreases. To improve the thermal stability of the dense BAM:Eu phosphor, the spherical BAM:Eu particles were coated with pure $BaMgAl_{10}O_{17}$ layer using the hydrolysis reaction in a solution system. The synthesized powders were characterized by XRD, SEM and PL. On the other hand, the emission properties of the BAM:Eu phosphors coated with $BaMgAl_{10}O_{17}$ layer before and after thermal treatment at $500^{\circ}C$ for 30 min were estimated under VUV excitation. The brightness of the coated phosphor was higher than that of the uncoated phosphor. Also, the coating thickness of BAM layer in the BAM:Eu particles was optimized.

• 한국재료학회지
• /
• 제27권10호
• /
• pp.530-533
• /
• 2017

ZnO micro/nanocrystals with different morphologies were synthesized by thermal evaporation of various zinc source materials in an air atmosphere. Zinc acetate, zinc carbonate and zinc iodide were used as the source materials. No catalysts or substrates were used in the synthesis of the ZnO crystals. The scanning electron microscope(SEM) image showed that the morphology of ZnO crystals was strongly dependent on the source materials, which suggests that source material is one of the key factors in controlling the morphology of the obtained ZnO crystals. Tetrapods, nanogranular shaped crystals, spherical particles and crayon-shaped crystals were obtained using different source materials. The X-ray diffraction(XRD) pattern revealed that the all the ZnO crystals had hexagonal wurtzite crystalline structures. An ultraviolet emission was observed in the cathodoluminescence spectrum of the ZnO crystals prepared via thermal evaporation of Zn powder. However, a strong green emission centered at around 500 nm was observed in the cathodoluminescence spectra of the ZnO crystals prepared using zinc salts as the source materials.

• 천문학회보
• /
• 제26권1호
• /
• pp.44.2-44.2
• /
• 2001

• 천문학회보
• /
• 제26권1호
• /
• pp.33-33
• /
• 2001

• 천문학회보
• /
• 제25권2호
• /
• pp.48-48
• /
• 2000

• 천문학회보
• /
• 제31권2호
• /
• pp.58.2-58.2
• /
• 2006

• 비파괴검사학회지
• /
• 제21권3호
• /
• pp.261-268
• /
• 2001

열-음향방출(thermo-AE) 기법을 이용하여 두께 3mm, $[+45_6/-45_6]_s$ 복합재료 적층판의 열응력 유기 손상에 대한 비파괴평가의 유효성을 연구하였다. 반복적인 열부하 사이클에 의해서 thermo-AE 사상수가 감소하는 경향이 뚜렷하게 나타나서 열부하에 따른 카이저효과가 관찰되었다. 열부하사이클중의 thermo-AE거동을 분석하여 복합재료의 응력자유온도를 결정할 수 있었다. 초음파 C스캔, 광학현미경, 주사형 전자현미경을 통해 섬유파단과 모재파손이 관찰되었으며, 이들 파손 인자는 thermo-AE 신호의 단시간 퓨리에 변환처리에 의해 생성된 3종류의 서로 다른 시간-주파수 특성과 대응하였나 이 특성을 이용하여 복합재료의 냉각열처리 및 반복 열부하사이클시의 손상발생과정 및 내부 마찰거동 내역을 추적할 수 있었다.