• 대한기계학회논문집A
• /
• 제34권5호
• /
• pp.651-657
• /
• 2010

180 bar 이상의 최대 폭발압과 높은 열부하를 가진 박용 디젤엔진의 분리형 피스톤은 크라운과 스커트를 각각 고강도 합금강과 연성주철을 사용한다. 피스톤의 피로설계를 위해서는 작용 하중, 표면조도 뿐만 아니라 온도영향에 의한 강도 저하를 고려해야 하며, 실린더 내부의 폭발력이 크라운을 거쳐 스커트에 전달되는 하중의 분율도 고려되어야 한다. 본 연구에서는 노치부의 피로강도 증분을 응력구배방법을 사용하여 고려하였으며, 열전달해석과 그에 따른 온도영향을 고려하였다. 하중 분율과 접촉압력은 공차해석을 통해 최적화하였으며, 프로타입 엔진에 대한 실차 시험을 통해 냉각 및 내구설계를 검증하였다.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.111-118
• /
• 2015

In this study, we carried out the emissions analysis of CO and $non-CO_2$ for the age-classes of various pine trees(Pinus koraiensis, Pinus densiflora, Pinus rigida Mill., Pinus thunbergii Parl.) to estimate of emission factors of the crown layer and surface layer in the forest fire. We used the thermal characteristic analyzer cone heater and NDIR analyzer in order to measure amount of emission. As a result, the major emissions of Pinus koraiensis were $CO_2$ and $CH_4$ and that of Pinus thunbergii Parl. was only CO. The major emissions of the most of pine trees were NO and $N_2O$. The $CO_2$ emission of Pinus thunbergii Parl. was the highest about as $7.26{\times}10^{-2}{\sim}1.63{\times}10^{-1}g$ and next came Pinus densiflora, Pinus koraiensis, Pinus rigida Mill.. And the CO emission of Pinus thunbergii Parl. was about $5.14{\times}10^{-3}{\sim}6.58{\times}10^{-3}g$ and followed by Pinus densiflora, Pinus koraiensis, Pinus rigida Mill.. The emissions of $CH_4$, NO, and $N_2O$ showed small differences between species and the emission of $CH_4$ was $8.37{\times}10^{-5}{\sim}2.55{\times}10^{-4}g$, and NO was $6.65{\times}10^{-5}{\sim}2.0{\times}10^{-4}g$ and $N_2O$ was $1.42{\times}10^{-4}{\sim}2.09{\times}10^{-3}g$ in all species. Particularly, the emission of Pinus thunbergii Parl. was the highest in all pine trees except $CH_4$.

• Restorative Dentistry and Endodontics
• /
• 제46권4호
• /
• pp.52.1-52.11
• /
• 2021

Objectives: This study evaluated the effects of low and moderate concentrations of triple antibiotic paste (TAP) and double antibiotic paste (DAP) loaded into a hydrogel system on crown discoloration and explored whether application of an adhesive bonding agent prevented crown discoloration. Materials and Methods: Intact human molars (n = 160) were horizontally sectioned 1 mm apical to the cementoenamel junction. The crowns were randomized into 8 experimental groups (calcium hydroxide, Ca[OH]₂; 1, 10, and 1,000 mg/mL TAP and DAP; and no medicament. The pulp chambers in half of the samples were coated with an adhesive bonding agent before receiving the intracanal medicament. Color changes (ΔE) were detected by spectrophotometry after 1 day, 1 week, and 4 weeks, and after 5,000 thermal cycles, with ΔE = 3.7 as a perceptible threshold. The 1-sample t-test was used to determine the significance of color changes relative to 3.7. Analysis of variance was used to evaluate the effects of treatment, adhesive, and time on color change, and the level of significance was p < 0.05. Results: Ca(OH)₂ and 1 and 10 mg/mL DAP did not cause clinically perceivable tooth discoloration. Adhesive agent use significantly decreased tooth discoloration in the 1,000 mg/mL TAP group up to 4 weeks. However, adhesive use did not significantly improve coronal discoloration after thermocycling when 1,000 mg/mL TAP was used. Conclusions: Ca(OH)₂ and 1 and 10 mg/mL DAP showed no clinical discoloration. Using an adhesive significantly improved coronal discoloration up to 4 weeks with 1,000 mg/mL TAP.

• 대한치과보철학회지
• /
• 제29권2호
• /
• pp.67-84
• /
• 1991

This study was carried out to investiagate the residual stress caused by the mismatch of thermal expansion and the bond failure resistance of alloy-porcelain specimens. The thermal expansions of alloys and porcelains were measured by using a straight push-rod dilatometer. Porcelain glass transition temperatures, thermal expansion coefficients, and thermal compatibility indices were derived from length-versus-temperature curves. Strain gauges were used to experimentally determine the Young's moduli of porcelains, the residual stresses of porcelain surface, and tensile bond strengths of the specimens of simulated porcelain metal crown. The obtained results were as follows: 1. The coefficients of thermal expansion for alloys were the minimum of $13.53\mu/^{\circ}C$ and the maximum of $20.11\mu/^{\circ}C$ in the range of $100\sim600^{\circ}C$ and those for porcelains were the minimum of $7.72\mu/^{\circ}C$ and the maximum of $31.24\mu/^{\circ}C$ in the range of $100\sim500^{\circ}C$. 2. The glass transition temperature of porcelains exhibited the same value without my relation to the healing rate, and the thermal disharmony of porcelain and alloy was more affected by porcelains than by the alloys. 3. The Young's moduli of body porcelains were larger than those of opaque porcelains(P<0.01) 4. It seemed that the residual stresses of porcelain surfaces in the porcelainalloy systems were more affected by porcelains than by alleys. 5. The bond strengths of the procelain-base metal alloy systems were larger than those of the porcelain-precious metal alloy systems. The fracture strengths of porcelain surfaces showed significant difference between porcelains (P<0.05).

• 한국표면공학회지
• /
• 제31권1호
• /
• pp.12-23
• /
• 1998

The Thermal Barrier Coating(TBC) has been used to improve the heat barrier and tribological properties of the aircraft engine and the automobile engine in high temperature. Especially, the high temperature tribological propertied of the cylinder haed and the piston crown of diesel engine was emphasized. Therefore, the purpose of this work was to evaluate the microstructure, tribological propeer in high tempearmal shock resistance and bonding strength of five layer functionally gradient TBC for the applications. The five layerwere composed with 100% ceramic insulating later, 75(ceramic):25 (metal) layer, 50:50 layer, 25:75 layer and 100% metal bonding layer to redude the thermal stress. the YSL and MSL poweders were the insulation ceramics powers. The NiCrAly, Inconel625 and SUS powders were the bonding and mixingg powders for plasma spray process. According to the result of high temperature wear test, the wera resistance of YSZ/NiCrAlY siytem was most out standing at 600 and $800^{\circ}C$. At $400^{\circ}C$, the wear resistance of YSZ/Inconel system was better than others. Wear volume at other temperature because of the low temperature degration of zirconia. The thermal shock mechanism of 5 later is the vertical crack gegration in insulating layer. this means that the initial cracks were generated in the top layer, and then developed into the composite layers during thermal shock test. Finally, these cracks werereached to the interface of coating and substrate and also, these vertioal cracks join with the horizontal cracks of the each layers. The bonding strength of YSZ/NiCrAlY and YSZ/Inconel 5 layer system is better than other 5layer systems. The theramal shock resistance of thermal barrier coating s with 5 layer system is better than that of 3 layers and 2 layers.

• 한국조경학회지
• /
• 제50권2호
• /
• pp.1-22
• /
• 2022

컴퓨터 시뮬레이션 프로그램인 ENVI-met을 활용하여 여름철 도로 방향과 가로수 식재형태에 따른 도시공간의 열환경 개선 효과를 분석하였다. 수목 식재 시 낮 시간 동안의 기온과 풍속은 감소하고 상대습도는 증가하였다. 평균복사온도와 인간 열환경지수 PET(physiological equivalent temperature), UTCI(universal thermal climate index)는 수목 식재 시 감소하는 경향을 보였다. 수목 식재 시 가장 큰 변화를 보인 기상요소는 평균복사온도로, PET와 UTCI 변화량 또한 평균복사온도와 유사한 패턴을 보였다. 가장 큰 저감효과를 보인 수목식재방법은 수고가 낮고, 수관폭이 넓고, 엽면적지수가 높은 수목을 좁은 간격으로 식재하는 시나리오(LWDN)였다. 평균복사온도, PET, UTCI는 태양의 고도 및 방위와 건물의 위치에 따른 그림자 형성 조건에 따라 큰 차이를 보였으며, 건물에 의한 태양복사에너지 차단이 클수록 수목에 의한 영향이 줄어들었다. 특히, 동측과 서측 보도에서는 시간대별 저감량에서 큰 차이를 보였다. 가장 저감효과가 큰 수목식재 시나리오인 LWDN으로 식재하였을 때 서측 방면에 위치한 북서, 서, 남서측 보도는 오전 시간대인 10:00에 수목이 없는 경우에 비해 PET 8.6-12.3℃, UTCI 4.2-4.5℃, 동측 방면에 위치한 북동, 동, 남동측 보도는 오후 시간대인 16:00에 PET 8.1-11.8℃, UTCI 4.4-5.0℃로 큰 저감효과를 보였다. 반면, 가장 저감효과가 적었던 수고가 높고, 수관폭이 좁으며, 엽면적지수가 낮은 수목을 넓은 간격으로 식재하였을 때 최대 저감량은 동측 방면 보도에서 PET 1.8℃, UTCI 0.9℃ 이하, 서측 방면 보도에서 PET 3℃, UTCI 0.9℃ 이하로 적은 저감효과를 보였다. 또한, 건물에 의한 영향으로 인해 수목영향이 적은 시간대에는 수목식재 시나리오 간 평균복사온도, PET, UTCI 저감효과의 차이가 크지 않았다. 이 연구결과는 가로수 식재 시 여름철 도시 열환경 저감을 위한 모델 개발에 기초자료로서 활용가능할 것이다.

• 한국조경학회지
• /
• 제45권5호
• /
• pp.105-112
• /
• 2017

가로수가 여름철 인간 열환경지수(열쾌적성)에 미치는 영향을 분석하기 위해, 낙엽활엽교목 2종과 상록활엽교목 3종 총 5종의 가로수를 대상으로 수목 하부의 음지와 그 옆의 양지에서 미기후 자료를 측정하여 비교 분석하였다. 그 결과, 기온, 상대습도, 풍속의 차이는 각각 평균 $0.2{\sim}1.5^{\circ}C$, 0.9~5.3%, $0.1{\sim}0.5ms^{-1}$로 미비하였으나, 평균복사온도는 평균 $27.1^{\circ}C$의 매우 큰 차이를 보여 주었다. 인간 열환경지수인 PET와 UTCI 결과에서는 수목 하부의 음지가 양지에 비해 PET에서는 평균 21.2~31.3%의 저감 비율을 보여 1.5~2.5단계의 열지각 개선 효과를 나타내었으며, UTCI에서는 평균 12.7~20.0%의 저감 비율을 보여 1~1.5단계의 heat stress 저감 효과를 보이는 것으로 나타났다. 또한, 상록활엽교목이 낙엽활엽교목에 비해 PET에서 평균 5% 더 높은 저감 비율을 나타냈지만, 낙엽활엽교목에 속하는 느티나무는 지엽의 밀도가 높아 상록활엽교목 만큼의 열환경지수(열쾌적성) 개선 효과를 나타내었다. 이에 따라, 가로수의 여름철 열 저감 효과에서 지엽의 밀도와 평균복사온도가 주요 영향임을 알 수 있었다.

• 대한치과기공학회지
• /
• 제9권1호
• /
• pp.39-49
• /
• 1987

This study done to evaluate some surface treatment methods in metal coping which can increase the bond strength between porcelain and metal. Therefore this experiment was performed according to the Mc Lean's Theory of bond strength between porcelain and strength between porcelain and metal. In the experiment the author measured respective thermal expansion coefficents in three types of metal(Tallasium, Vera Bond and Rexillium) and Vita Porcelain to get the differences in the coefficents between porcelain and metals. And using insteron testing machine, the author also performed Planar interface shear bond tests on the 45 specimens(15 specimens in oxide surface, rough surface and fine surface treatment methods respectively) to measure bond strength between metal and porcelain. The results Were as follows, 1. The differences in thermal expansion coefficients between three types of metal and Vita procelain: Talladium - $1.2\;10^{-6/0}\;C$, Vera Bond - $1.6\;10^{-6/0}\;C$, Rexillium - $1.9\;10^{-6/0}\;C$. 2. The bond strength in oxide surface on the Shear bond test was the lowest among the treatment methods. 3. There was no significant differences in treatment methods of rough surface of fine surface. 4. In the oxide surface treatment method, there were significant differences(P<0.05)between Vera bond and Rexillium, and between Talladium and Rexillium. 5. In the fine surface treatment, there was a significant difference(P<0.05)between Talladium and Rexillium.

• Steel and Composite Structures
• /
• 제21권2호
• /
• pp.429-442
• /
• 2016

The aim of this paper is to determine temperature and stress distributions in a ceramic based on Partially Stabilized Zirconia coated steel piston crown by using plasma spraying for improving performance of a marine diesel engine. Effects of coating constituent and thickness on temperature and stress distributions were investigated including comparisons with results from an uncoated piston by means of finite element method namely ANSYS. Temperature developed at the coated surface is significantly higher than that of the uncoated piston. The maximum stress components occur between bond coat and adjacent ceramic layer. Provided that coating thickness is constant as 0.5 mm, when numbers of layers increase, magnitude of the normal stress decrease about 34.1% on the base metal surface according to uncoated piston, but the base metal surface temperature of the steel piston increase about 13.1%.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.614-618
• /
• 2002

In hot strip mills, Portable Roll Scanner (the portable roll surface temperature and profile measuring device) can be used to calibrate on-line Process models for strip crown and flatness by measuring the thermal expansion and wear profile of the rolls. And the surface temperature measurement can be used to optimize the roll cooling system. Portable Roll Scanner consists of the measuring device, which has two contact inductive distance transducers for roll profile measurement and one infrared Pyrometer for surface temperature measurement, and computer-based controller that is equipped with the measuring device. By the wireless data communication, the data is transferred to the memory of notebook for further analysis. After roll extraction from mills, Portable Roll Scanner measure the roll profile and surface temperature simultaneously along the work roll face and display the results in the TFT color monitor of notebook. Portable Roll Scanner is useful at mill-side and roll grinding shop.