• 한국강구조학회 논문집
• /
• 제9권4호통권33호
• /
• pp.515-521
• /
• 1997

마그네슘 금속 복합재의 열처리 및 섬유 강화재 방향에 따른 효과를 파악하기 위하여 인장강도 및 피로해석이 연구되었다. TEM 관측에 따라 시편은 섬유 강화재와 마그네슘 복합기지 사이의 시효 열처리된 변형된 계면이다. 인장실험 결과로부터 시효 처리된 시편의 극한 인장강도는 주조상태의 시편보다 시효 처리시 화학반응에 의한 섬유 강화재-기지간의 접합강도 약화로 감소하였다. 피로균열 거동실험은 균열거동 방향이 섬유 강화재 방향과 수직인 시편과 균열거동 방향이 섬유 강화재 방향과 평행한 시편을 실험하였다. 피로균열 거동해석을 비교해보면 섬유 강화재와 하중방향이 수직인 시효처리된 시편의 경우가 주조상태의 시편보다 피로균열 거동에 더 크게 저항하였다. 반대로 섬유 강화재 방향에 평행한 주조상태의 시편은 섬유 강화재 방향에 평행한 시효처리된 시편보다 피로 균열거동에 더 크게 저항함을 알 수 있었다.

• 마이크로전자및패키징학회지
• /
• 제14권2호
• /
• pp.35-40
• /
• 2007

Sn-8Zn-3Bi 무연 솔더 페이스트의 접합부신뢰성 및 적합성을 평가하기 위해 유(SnPb) 무연(Sn, SnBi)도금된 Cu 리드프레임 QFP(Quad Flat Packager)를 사용하여 열충격 조건 하에서의 인장 강도의 변화 및 파괴 기구에 대한 분석을 실시하였다. 리드 도금의 종류에 상관없이 모든 시험 시편에서 열충격 사이클 수의 증가에 비례하여 접합부의 취성 특성이 강화되어 인장 강도가 감소하는 것을 확인하였다. 하지만, 접합부에는 열팽창 계수의 차이에 의해 야기될 수 있는 미세 균열은 발견되지 않았다. 단면 관찰 및 변위 이력 곡선 분석을 통하여 열충격 사이클 수의 증가에 따른 인강 강도의 감소는 접합부의 파괴 기구의 변화에 기인되었음을 확인하였다. 본 실험을 통해 Sn-3Zn-3Bi 솔더의 유 무연 도금 Cu 리드프레임과의 우수한 작업 특성과 열충격 환경 하에서도 우수한 기계적 접합 특성을 유지하는 것을 확인할 수 있었다.

• 대한기계학회논문집A
• /
• 제20권7호
• /
• pp.2134-2140
• /
• 1996

This study was carried out to anlayze the heat-resistant characteristics of functionally gradient material(FGM) composed with ceramic and metal. The thermal fracture behavior of plasma-sprayed FGM and conventional coating material(NFGM) was exaimined by acoustic emession technique under heating and cooling. Furnace cooling and rapid cooling tests were used to examine the effect of temperature change under various conditions, respectively. At the high temperature above $800^{\circ}C$, it was shown that FGM gives higher thermal resistance compared to NFGM by AE signal and fracture surface analysis.

• 한국안전학회지
• /
• 제21권4호
• /
• pp.95-101
• /
• 2006

It is well known that the thermal load in PSC(prestressed concrete) box-girder bridge is the principal cause of detrimental crack. The longitudinal stress caused by the lateral stress from the temperature gradient in slab of PSC box-girder bridge has a considerable influence on the durability and economy of bridge structures. As the basic study for the rational consideration of thermal load and the derivation of design guide, the inverse thermal analysis program for PSC box-girder bridges using field measurement data is developed. In this paper, thermal analyses are performed using field monitoring data for the sample PSC box-girder bridge. It is proposed that the link between monitoring program and the inverse analysis program is available.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.38-42
• /
• 2002

An apparatus was developed to repetitively apply a $-196^{\circ}C$ thermal load to coupon-sized mechanical test specimens. Using this device, IM7/5250-4 (carbon / bismaleimide) cross-ply and quasi-isotropic laminates were submerged in liquid nitrogen ($LN_2$) 400 times. Ply-by-ply micro-crack density, laminate modulus, and laminate strength were measured as a function of thermal cycles. Quasi-isotropic samples of IM7/977-3 (carbon / epoxy) composite were also manually cycled between liquid nitrogen and an oven set at $120^{\circ}C$ for 130 cycles to determine whether including elevated temperature in the thermal cycle significantly altered the degree or location of micro-cracking. In response to thermal cycling, both materials micro-cracked extensively in the surface plies fellowed by sparse cracking of the inner plies. The tensile modulus of the IM7/5250-4 specimens was unaffected by thermal cycling, but the tensile strength of two of the lay-ups decreased by as much as 8.5%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.729-734
• /
• 2001

Thermal stratification due to turbulence penetration and in-leakage of valve cause the large thermal stress, which lead to fatigue crack of the piping system of nuclear power plant. So it is needed that numerical and experimental study for the phenomenon is conducted because there have not yet been sufficient study for the relationship between turbulence penetration and thermal stratification. Therefore numerical analysis is done here and respected to give a fundamental method of the approach to the phenomenon.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.151-155
• /
• 2003

An apparatus was developed to repetitively apply a -196 $^{\circ}C$ thermal load to coupon-sized mechanical test specimens. Using this device, IM7/5250-4 (carbon / bismaleimide) cross-ply and quasi-isotropic laminates were submerged in liquid nitrogen (L$N_2$) 400 times. Ply-by-Ply micro-crack density, laminate modulus, and laminate strength were measured as a function of thermal cycles. Quasi-isotropic samples of IM7/977-3 (carbon / epoxy) composite were also manually cycled between liquid nitrogen and an oven set at 120 $^{\circ}C$ for 130 cycles to determine whether including elevated temperature in the thermal cycle significantly altered the degree or location of micro-cracking. In response to thermal cycling, both materials micro-cracked extensively in the surface plies followed by sparse cracking of the inner plies. The tensile modulus of the IM7/5250-4 specimens was unaffected by thermal cycling, but the tensile strength of two of the lay-ups decreased by as much as 8.5 %.

• 한국정밀공학회지
• /
• 제16권8호
• /
• pp.162-169
• /
• 1999

Fourier heat conduction law becomes invalid for the situations involving extremely short time heating, very low temperatures and fast moving heat source(or crack), since the wave nature of heat propagation becomes dominant. For these conditions, the modified heat conduction equation with the finite propagation speed of heat in the medium could be applied to predict heat flux and temperature distributions. In this study, temperature distributions at the vicinity of a very fast moving heat source are investigated numerically. Thermal fields are characterized by thermal Mach numbers(M) defined as the ratio of moving heat source speed to heat propagation speed in the solid. In the transonic and supersonic ranges($M{\ge}1$), thermal shocks are shown, which separate the heat affected zone from the thermally undisturbed zone.

• Tribology and Lubricants
• /
• 제15권2호
• /
• pp.199-205
• /
• 1999

Using a coupled thermal-mechanical analysis, the thermal distortion of the ventilated disk brakes has been investigated based on the air cooling effects during 15 braking operations. The FEM results show that the bendings and distortions of the disk toward the left side are decreased, but the sinusoidal distortion of the disk rubbing surface along the arc length of the vent hole is highly increased by increasing the convective air cooling effects, which is heavily related to the squeal, wear and micro-thermal crackings at the rubbing surfaces due to uneven dissipation rates of friction heatings.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제11권2호
• /
• pp.51-60
• /
• 2003

In the nuclear power plant, emergency core coolant system (ECCS) is furnished at reactor coolant system (RCS) in order to cool down high temperature water in case of emergency. However, in this coolant system, thermal stratification phenomenon can occur due to coolant leaking in the check valve. The thermal stratification produces excessive thermal stresses at the pipe wall so as to yield thermal fatigue crack (TFC) accident. In the present study, effects of turbulence penetration on the thermal stratification into T-branches with square cross-section in the modeled ECCS are analysed numerically. Standard k-$\varepsilon$ model is employed to calculate the Reynolds stresses in momentum equations. Results show that the length and strength of thermal stratification are primarily affected by the leak flow rate of coolant and the Reynolds number of duct. Turbulence penetration into the T-branch of ECCS shows two counteracting effects on the thermal stratification. Heat transport by turbulence penetration from main duct to leaking flow region may enhance thermal stratification while the turbulent diffusion may weaken it.