• 한국재료학회지
• /
• 제20권4호
• /
• pp.194-198
• /
• 2010

Cubic boron nitride (c-BN) is a promising material for use in many potential applications because of its outstanding physical properties such as high thermal stability, high abrasive wear resistance, and super hardness. Even though 316L austenitic stainless steel (STS) has poor wear resistance causing it to be toxic in the body due to wear and material chips, 316L STS has been used for implant biomaterials in orthopedics due to its good corrosion resistance and mechanical properties. Therefore, in the present study, c-BN films with a $B_4C$ layer were applied to a 316L STS specimen in order to improve its wear resistance. The deposition of the c-BN films was performed using an r.f. (13.56 MHz) magnetron sputtering system with a $B_4C$ target. The coating layers were characterized using XPS and SEM, and the mechanical properties were investigated using a nanoindenter. The friction coefficient of the c-BN coated 316L STS steel was obtained using a pin-on-disk according to the ASTM G163-99. The thickness of the obtained c-BN and $B_4C$ were about 220 nm and 630 nm, respectively. The high resolution XPS spectra analysis of B1s and N1s revealed that the c-BN film was mainly composed of $sp^3$ BN bonds. The hardness and elastic modulus of the c-BN measured by the nanoindenter were 46.8 GPa and 345.7 GPa, respectively. The friction coefficient of the c-BN coated 316L STS was decreased from 3.5 to 1.6. The wear property of the c-BN coated 316L STS was enhanced by a factor of two.

• 폴리머
• /
• 제30권4호
• /
• pp.350-356
• /
• 2006

실리콘/아크릴수지를 기반으로 한 내후성 도료의 조성이 물성에 미치는 영향을 연구하기 위하여 안료분산 용 및 희석용 실리콘/아크릴수지의 배합비를 중량비율 2 : 8, 3 : 7, 4 : 6 의 3종으로 변화시키면서 내후성 도료를 제조하였다. 제조된 도료의 도막물성 및 내후성이 판단할 수 있는 각종 도막실험을 실시한 결과, 실리콘 성분함량이 증가할수록 열적안정성, 염수분무 및 내후성 등이 향상되었으며, 적정배합비는 2 : 8임을 알 수 있었다. 또한 실리콘 성분을 30 wt% 함유한 도료는 고내후성을 보유함을 확인하였다.

• 한국재료학회지
• /
• 제21권2호
• /
• pp.115-119
• /
• 2011

Si Nanowire (NW) field effect transistors (FETs) were fabricated on hard Si and flexible polyimide (PI) substrates, and their electrical characteristics were compared. Si NWs used as channels were synthesized by electroless etching method at low temperature, and these NWs were refined using a centrifugation method to get the NWs to have an optimal diameter and length for FETs. The gate insulator was poly(4-vinylphenol) (PVP), prepared using a spin-coating method on the PI substrate. Gold was used as electrodes whose gap was 8 ${\mu}m$. These gold electrodes were deposited using a thermal evaporator. Current-voltage (I-V) characteristics of the device were measured using a semiconductor analyzer, HP-4145B. The electrical properties of the device were characterized through hole mobility, $I_{on}/I_{off}$ ratio and threshold voltage. The results showed that the electrical properties of the TFTs on PVP were similar to those of TFTs on $SiO_2$. The bending durability of SiNWs TFTs on PI substrate was also studied with increasing bending times. The results showed that the electrical properties were maintained until the sample was folded about 500 times. But, after more than 1000 bending tests, drain current showed a rapid decrease due to the defects caused by the roughness of the surface of the Si NWs and mismatches of the Si NWs with electrodes.

• 한국화재소방학회논문지
• /
• 제25권1호
• /
• pp.63-71
• /
• 2011

비대칭 H형강을 활용한 슬림플로어의 경우, 상대적으로 열전달 속도가 낮은 콘크리트에 강재가 매립된 형상으로 설계되어 화재조건에서 강재의 강성저하를 최소화 할 수 있는 형상으로 설계되었다. 그러나 비대칭 H형강의 하부플렌지는 화재에 직접적으로 노출되므로, 이 부분에 대한 내화피복을 적용하여 슬림플로어 보의 내화성능을 최대한 확보할 수 있는 방안을 모색하고자 하였다. 실험계획은 재하 하중비 0.4와 0.3을 조정하여 하중조건에 따른 내화성능을 비교하고자 하였고 철근보강에 따른 내화성능 향상효율, 내화피복을 적용하였을 경우의 180분 내화성능 확보 유 무를 분석하고자 실험을 수행하였다. 하중비 변화에 따른 실험체를 비교한 결과, 0.1 의 하중비를 낮출 경우 내화성능은 12분 차이가 나며, 처짐격차는 39mm였다. 철근보강에 따른 영향은 12분정도의 내화성능 향상이 가능하며, 최대 102.4mm의 처짐이 제어된다.

• 한국전기전자재료학회논문지
• /
• 제27권4호
• /
• pp.226-231
• /
• 2014

Thin thermistor films of solutions with nickel and manganese oxides were prepared by metal-organic decomposition (MOD). The structural properties of the thin films were investigated as a function of annealing temperature. Field emission scanning electron microscope (FE-SEM) results indicated that the thin films had a thin thickness, smooth and dense surface. The crystallization temperature of $414.9^{\circ}C$ was confirmed from thermogavimetric-differential thermal analysis (TG-DTA) curve. A single phase of cubic spinel structure was obtained for the thin film annealed from $700^{\circ}C$ to $800^{\circ}C$, which was confirmed from the X-ray diffraction (XRD). From the selected area electron diffraction (SAED) in high resolution transmission electron microscope (HRTEM), the nano grains (2~3 nm) of spinel phase with (311) and (222) planes were detected for the thin film annealed at $500^{\circ}C$, which could be applicable to read-out integrated circuit (ROIC) substrate of the uncooled microbolometer with low processing temperature.

• 한국안전학회지
• /
• 제22권5호
• /
• pp.77-83
• /
• 2007

식물류에 다량으로 함유되어 있는 Cellulose는 인체에 무해할 뿐 아니라 연소시에 발생하는 유해가스가 적어서 친환경적인 에너지 자원으로 대두되고 있다. 특히 Cellulose의 유도체 중 하나인 Hydroxypropyl Methyl Cellulose(HMC)는 의약품의 코팅재료를 비롯하여, 고급용 건축자재, 염료, 화장품 등의 첨가제로 사용되면서, 사용량이 계속해서 증가하고 있다. 따라서 여러 가지 위험에 노출될 수 있으며, 열적 위험특성을 알기 위한 방법으로 일본에서 많이 사용되고 있는 단열자기발열실험장치(SIT-II)를 이용하여 HMC의 한계발화온도와 겉보기활성화에너지를 구하였다. 또한 국제적으로 널리 알려진 Frank-Kamenetskii의 무한평판을 기준으로 한 자연발화실험(IF-SIT)자료를 이용하여 자연발화온도와 활성화 에너지 값을 비교하였다. HMC의 자연발화온도와 겉보기 활성화 에너지는 SIT-II의 경우 $186^{\circ}C$의 한계발화온도와 104.5kJ/mol의 활성화 에너지를 구하였다. 기존에 구하여진 IF-SIT결과 값과 비교하였을 때 무한평판의 두께 3cm, 5cm, 7cm에 대해 각각 한계발화온도가 $199.5^{\circ}C,\;188.5^{\circ}C,\;180.5^{\circ}C$이고, 167.4kJ/mol의 활성화 에너지 값을 지니므로, SIT-II로 구하여진 겉보기 활성화 에너지는 IF-SIT로 구하여진 값 보다 낮게 나타났으며, 이 값은 일반 Cellulose의 활성화 에너지 값 보다 도 더 낮은 것으로 나타났다.

• 한국염색가공학회지
• /
• 제28권1호
• /
• pp.40-47
• /
• 2016

As a coating material for loudspeaker dampers, resilient polyurethane/epoxy hybrid resins were synthesized to replace conventional phenol resin and examined the physical properties, which are not only environmentally friendly but also not harmful to human. Five types of polyurethane resins were synthesized in the step-shot method using methylene diisocyanate, three polyols such as poly tetramethylene ether glycol(PTMEG, MW:2000), poly(1,4-buthylene adipate(PBAP, MW:2000), and poly carbonatediol(PCD, MW:2000), and three chain extenders such as ethylene glycol(EG), neopentyl glycol(NPG), and 1,4-buthandiol(1,4-BD). The five types of synthesized polyurethane resins and commercially available bisphenol A type epoxy resin were blended in weight ratios of 90:10, 70:30, and 50:50 to synthesize 15 types of polyurethane/epoxy hybrid resins. Among the polyurethane resins, the one that was synthesized using PCD and 1,4-BD showed excellent tensile strength, 100% modulus, low extension, and relatively high viscosity. Polyurethane/epoxy hybrid resins with higher epoxy resin contents showed better thermal properties and water resistance while those with higher polyurethane contents showed higher flexibility. The polyurethane/epoxy hybrid resin made by blending the polyurethane based on PCD and 1,4-BD with a bisphenol A type epoxy resin in a weight ratio of 70:30 was identified to be the most suitable to be used in speaker dampers.

• 한국분말재료학회지
• /
• 제23권1호
• /
• pp.38-42
• /
• 2016

$BaTiO_3$-coated Fe nanofibers are synthesized via a three-step process. ${\alpha}-Fe_2O_3$ nanofibers with an average diameter of approximately 200 nm are first prepared using an electrospinning process followed by a calcination step. The $BaTiO_3$ coating layer on the nanofiber is formed by a sol-gel process, and a thermal reduction process is then applied to the core-shell nanofiber to selectively reduce the ${\alpha}-Fe_2O_3$ to Fe. The thickness of the $BaTiO_3$ shell is controlled by varying the reaction time. To evaluate the electromagnetic (EM) wave-absorbing abilities of the $BaTiO_3@Fe$ nanofiber, epoxy-based composites containing the nanofibers are fabricated. The composites show excellent EM wave absorption properties where the power loss increases to the high frequency region without any degradation. Our results demonstrate that the $BaTiO_3@Fe$ nanofibers obtained in this work are attractive candidates for electromagnetic wave absorption applications.

• 공업화학
• /
• 제9권2호
• /
• pp.306-310
• /
• 1998

용해성 PMDA/diamine/dianhydride 폴리이미드를 제조하여 특성을 고찰하고, 상용 알루미나 세라믹막내에 제조한 PMDA/diamine/dianhydride 용액을 코팅하여 기체투과특성을 알아보았다. Tg는 $337{\sim}358^{\circ}C$의 범위로 열적안정성은 우수함을 보였다. 용해성에 있어서는 NMP, DMAc, DMSO, THF, m-cresol의 극성 용매에 대해 대부분 좋은 결과를 보여 주었다. 알루미나막과 용해성 폴리이미드의 점착은 잘 이루어졌으며, 기체투과실험에 있어 6FDA를 포함한 폴리이미드의 경우 높은 투과도를 보였다. PMDA/1,3PDA/6FDA의 경우 질소투과도는 약 $7.6{\times}10^{-7}(mol/m^2{\cdot}Pa{\cdot}s)$의 값을 나타내었고, 질소에 대한 산소의 이상적 분리도, $P(O_2/N_2)$는 6.19였으며, $P(H_2/N_2)$의 경우는 약 70.0의 이상적 분리도를 보였다.

• Advances in nano research
• /
• 제3권3호
• /
• pp.133-141
• /
• 2015

Influence of Ag nanoparticles on optical and photovoltaic properties of, silicon substrates, silicon solar cells and glass have been investigated. Silver nanoparticles have been fabricated by evaporation of thin Ag layers followed by the thermal annealing. The surface plasmon resonance peak was observed in the absorbance spectrum at 470 nm of glass with deposited silver nanoparticles. It is demonstrated that deposition of silver nanoparticles on silicon substrates was accompanied with a significant decrease in reflectance at the wavelength 360-1100 nm and increase of the absorption at wavelengths close to the band gap for Si substrates. We studied influence of Ag nanoparticles on photovoltaic characteristics of silicon solar cells without and with common use antireflection coating (ARC). It is shown that silver nanoparticles deposited onto the front surface of the solar cells without ARC led to increase in the photocurrent density by 39% comparing to cells without Ag nanoparticles. Contrary to this, solar cells with Ag nanoparticles deposited on front surface with ARC discovered decrease in photocurrent density. The improved performance of investigated cells was attributed to Ag-plasmonic excitations that reduce the reflectance from the silicon surface and ultimately leads to the enhanced light absorption in the cell. This study showed possibility of application of Ag nanoparticles for the improvement of the conversion efficiency of waferbased silicon solar cells instead of usual ARC.