• 한국기계가공학회지
• /
• 제19권7호
• /
• pp.89-97
• /
• 2020

Container vessels continue to grow in size, led by global shipowner. Large ships can be loaded more cargo at a time, reducing the cost of transportation per teu. this eventually leads to economies of sale, in which the production cost per unit decreases with increasing output. in accordance with the 70th Convention of the Marine Environment Protection Committee of the International Maritime Organization, as of January 1, 2020, MARPOL Annex VI Regulation 14.1.3 will be effective. All vessels must be meet these criteria to reduce Sox emissions and reduce NOx emissions by reducing the content of manned sulfur oxides from 3.5% to less than 0.5%, otherwise IACS Member States Entry to the port is denied. in order to do that need to LNG storage tank. in this study characteristic of the material after line heating (600℃,700℃,800℃,900℃) of 9% Ni steel used in the manufacture of LNG fuel tank of ship were verified using by mechanical test. In the heating method by line heating. The initial properties of steel are changed by variables such as temperature, time, speed. The experimental data of line heating presented in this paper confirmed that the initial change of 9% Ni steel could be minimized.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1547-1552
• /
• 2008

The tip of these catheter with straight needles is not able to reach in the vicinity of the disc bulging, which are the cause of the low back pain and because the far indirect radio-frequency treatment results in the decompression, the nucleoplasty has the limit. Many incurable diseases has not been solved due to the unexistence of the advanced technique for the MIS human body catheter device. To increase the possibility of nucleoplasty, the needle tip should be located at the closest area of the lesion. For this reason, the best way to increase the success rate of the operation is that the needle tip should access 3-dimensionally to the operating field as soon as possible. To achieve this aim, our studies are restricted as follows: 1) the SMA catheter design to control the 3-dimensional direction, 2) the security of the immediate response by the positive control of the SMA element thermal distribution using Peltier thermoelectric elements, 3) the aquisition of the control data by monitoring the relationship between the temperature of SMA element and the displacement, and 4) the design of the controller to guarantee the accurate location.

• 폴리머
• /
• 제24권1호
• /
• pp.105-112
• /
• 2000

본 연구에서는 항공기 구조용 재료로 쓰이는 탄소섬유/에폭시 복합재료 프리프레그(DMS 2224)를 모델시스템으로 하여 등온환경과 등속도 가열환경에서 경화반응 속도를 연구하였다. 이 복합재료의 공정온도에서의 가공공정을 묘사할 수 있는 현상학적인 반응속도 모델을 differential scanning calorimetry (DSC)와 이론을 통하여 제안하였다. 등온환경에서의 실험으로부터 반응특성곡선을 관찰한 결과 경화반응이 1차 반응함수임을 확인하였고, 활성화 에너지는 78.43 kJ/mo1을 얻었다. 이 프리프레그는 경화온도에 따라 한계경화도를 보여주어 유리화가 존재함을 확인하였고 이를 1차 반응속도 모델에 적용시킨 결과, 유리화 이후의 확산우세현상을 포함한 반응속도 모델을 제안하였다. 제안된 모델식을 이용하여 등온/등속도 가열환경을 포함한 실제 경화공정을 성공적으로 표현할 수 있었다.

• 멤브레인
• /
• 제18권1호
• /
• pp.75-83
• /
• 2008

본 연구에서는 Polyethylene (PE, Asahi) 이차전지용 막의 표면불소화를 통해 기계적 강도 및 열적 안정성과 고출력에서의 안정성을 높이기 위한 연구를 실시하였다. 전자주사현미경(scanning electron microscope, SEM), 접촉각(contact angle)을 통하여 불소가스 노출시간에 따른 막의 표면과 구조의 변화를 관찰하고, 인장강도와 표면 친수성 실험을 통하여 막의 기계적 물성을 확인하였다. 제조된 막의 전기화학적 특성을 확인하기 위하여 충/방전 실험, 수명특성. 고율방전시험을 실시하여 고출력에서 온도에 대한 안정성이 향상되었음을 확인하였다.

• 한국재료학회지
• /
• 제5권7호
• /
• pp.786-793
• /
• 1995

Ag를 $Y_1$Ba$_2$Cu$_3$O$_{7-y}$에 첨가하여 고상반응법으로 시료를 제작, Ag가 $Y_1$Ba$_2$Cu$_3$O$_{7-y}$의 고온초전도성과 그의 미세구조에 미치는 영향을 조사하였고 그에 따른 기계적 특성을 연구하였다. Ag의양이 증가함에 따라 결정립의 크기가 증가하였고 연결성이 향상되어 시료의 결정구조가 치밀해지고 단단해졌으며 결정립간의 weak link와 weak coupling을 줄이고 균일한 초전도 상을 형성시킨다는 것을 알 수 있었다. 또한 $Y_1$Ba$_2$Cu$_3$O$_{7-y}$결정구조의 이방성을 줄였고 $Y_1$Ba$_2$Cu$_3$O$_{7-y}$의 열적 안정성을 향상 시켰음을 알 수 있었다. 그리고 Ag의 첨가에 따라 시료의 기계적 강도가 증가함을 보였다.가함을 보였다.

• 한국분말재료학회지
• /
• 제18권3호
• /
• pp.262-268
• /
• 2011

In order to investigate the microstructure and mechanical properties of WC-10 wt% Co insert tool alloy fabricated by PIM (Powder Injection Molding) process, the feedstock of WC-10 wt% and wax used as a kind of binder were mixed together by two blade mixer. After injection molding, the debinding process was carried out by two-steps. First, solvent extraction, in which the binder was eliminated by putting the specimen into normal hexane for 24 hrs at $60^{\circ}C$, and subsequently thermal debinding which was conducted at $260^{\circ}C$ and $480^{\circ}C$ for 6 hrs in the mixed gas of $H_2/N_2$, respectively. Meantime, in order to compensate the decarburization due to hydrogen, 1.2~1.8% of carbon was added to ensure the integrity of the phase. Finally, the specimens were sintered in vacuum under different temperatures, and the relative density of 99.8% and hardness of 2100 Hv can be achieved when sintered at $1380^{\circ}C$, even the TRS is lower than the conventional sintering process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.75-76
• /
• 2006

LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of kernel parts of LCD unit and it consists of several optical sheets(such as prism, diffuser and protector sheets), LCP (Light Guide Plate), light source (CCFL or LED) and mold frame. The LGP of LCD-BLU is usually manufactured by forming numerous dots with $50{\sim}200{\mu}m$ in diameter on it by erosion method. But the surface of the erosion dots of LGP is very rough due to the characteristics of the erosion process during the mold fabrication, so that its light loss is high along with the dispersion of light into the surface. Accordingly, there is a limit in raising the luminance of LCD-BLU. In order to overcome the limit of current dot patterned LGP, optical pattern design with $50{\mu}m$ micro-lens was applied in the present study. Especially, the negative and positive micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP. The attention was paid to the effects of different pattern conditions to the brightness distribution of BLU with micro-lens patterned LGP. Finally, negative micro-lens patterned LGP showed superior results to the one made by positive in average luminance.

• 한국농공학회논문집
• /
• 제48권5호
• /
• pp.51-60
• /
• 2006

In order to examine the heat transfer characteristic of a soil warming system and effects of soil warming on the greenhouse heating load, control experiments were performed in two greenhouses covered with double polyethylene film. One treated the soil warming with an electric heat wire and the other treated a control. Inside and outside air temperature, soil temperature and heat flux, and heating energy consumption were measured under the set point of heating temperature of $5,\;10,\;15,\;and\;20^{\circ}C$, respectively. Soil temperatures in a soil warming treatment were observed $4.1\;to\;4.9^{\circ}C$ higher than a control. Heating energy consumptions decreased by 14.6 to 30.8% in a soil warming treatment. As the set point of heating temperature became lower, the rate of decrease in the heating energy consumptions increased. The percentage of soil heat flux in total heating load was -49.4 to 24.4% and as the set point of heating temperature became higher, the percentage increased. When the set point of heating temperature was low in a soil warming treatment, the soil heat flux load was minus value and it had an effect on reducing the heating load. Soil heat flux loads showed in proportion to the air temperature difference between the inside and outside of greenhouse but they showed big difference according to the soil warming treatment. So new model for estimation of the soil heat flux load should be introduced. Convective heat transfer coefficients were in proportion to the 1/3 power of temperature difference between the soil surface and the inside air. They were $3.41\;to\;12.42\;W/m^{2}^{\circ}C$ in their temperature difference of $0\;to\;10^{\circ}C$. Radiative heat loss from soil surface in greenhouse was about 66 to 130% of total heating load. To cut the radiation loss by the use of thermal curtains must be able to contribute for the energy saving in greenhouse.

• 한국산학기술학회논문지
• /
• 제16권4호
• /
• pp.2958-2965
• /
• 2015

공중합체인 PLGA는 생분해성 고분자로서 의료용 이식재료로 사용되고 있으며, 이를 이용한 멤브레인은 양호한 생분해 특성 및 지속적 약물 전달체로서 치조골 유도제로 적용할 수 있다. 본 연구는 락티드, 글리콜리드 합성 및 공중합과정을 거쳐 상전이법을 이용하여 PLGA 멤브레인을 제조하였으며, 멤브레인의 광학적(NMR, IR), 기계적(인장강도), 열적(DSC)특성을 조사하였다. 또한 PLGA 멤브레인의 생분해 특성은 PBS (Phosphate Buffered Solution)이 담긴 항온조($60^{\circ}C$) 내에서 분해시간에 따른 표면분해 정도, 멤브레인의 질량변화 및 용액의 pH 변화로 측정하였다.

• 자원환경지질
• /
• 제26권4호
• /
• pp.519-539
• /
• 1993

A total of 264 independently oriented core samples were collected from 26 sites in the southwestern part (the Naktong Trough) of the Cretaceous $Ky{\check{o}}ngsang$ Basin in south Korea. The sampled formations comprise the sedimentary Shindong and the Hayang Groups of the Lower Cretaceous age. Alternating field and thermal demagnetizations were conducted. Characteristic remanent magnetization (ChRM) was relatively easily isolated in each formation except in the Chinju formation, from which only remagnetization circles were observed. Even though an extensive use of the fold test was not possible due to the nearly homoclinal nature of the strata in the area, we believe that the ChRM of each formation is of primary origin based on the following grounds: The in-situ ChRM direction of each formation is different from the present geomagnetic field direction. Fisherian precision parameter becomes enhanced through the tilt correction in all formations, closely to the values required for a positive fold test. Three out of the five studied formations pass the reversal test. The mean palaeomagnetic pole position from the studied area is found to be statistically different from the contemporary pole from the Chinese block exclusive of the Shandong area. The difference in magnetic declination suggests a $14.5^{\circ}$ (${\pm}10.5^{\circ}$) clockwise rotation of the studied area relative to the Chinese block comprising the west of the Tan-Lu fault. On the other hand, any significant difference in magnetic inclination and concurrent palaeolatitude is not observed between the studied area and China as well as the other area (Taegu-Andong area) in the $Ky{\check{o}}ngsang$ Basin. The dual nature of the magnetic polarity confirmed in all formations suggests an older than 124 Ma (Neocomian or older) age of the studied sedimentary strata.