• Journal of information and communication convergence engineering
• /
• v.8 no.2
• /
• pp.173-179
• /
• 2010

Over recent years, much research attention has been devoted to a two-factor authentication mechanism which integrates both tokenized pseudorandom numbers with user specific biometric features for biometric verification, known as Biohash. The main advantage of Biohash over sole biometrics is that Biohash is able to achieve a zero equal error rate and provide a clean separation of the genuine and imposter populations, thereby allowing elimination of false accept rates without imperiling the false reject rates. Nonetheless, when the token of a user is compromised, the recognition performance of a biometric system drops drastically. As such, a few solutions have been proposed to improve the degraded performance but such improvements appear to be insignificant. In this paper, we investigate and pinpoint the basis of such deterioration. Subsequently, we propose a two-level approach by utilizing strong inner products and fuzzy logic weighting strategies accordingly to increase the original performance of Biohash under this scenario.

• Quality Improvement in Health Care
• /
• v.5 no.2
• /
• pp.296-310
• /
• 1998

Background : Performance evaluation of medical care providers has become more important than before in Korea. Especially in university hospitals, job contents of medical staffs are so complicated that evaluation is not easily performed. In addition, in order that the feedback of evaluation be successful, acceptance of staffs to be evaluated is essential. This study is aimed at the development of items for evaluation and weighting of each item in one university hospital, and clustering departments by different weight given by medical staffs. Methods : Through resource group meeting. performance items were listed up by categories of education, research, medical services, and other activities in and out of the hospital. For each item, all the medical staffs were asked how important they thought, compared with publishing one original article. By factor analysis, the items in each category were grouped into a few subgroups. In turn, cluster analysis was done for the purpose of grouping departments by priority the medical staffs gave. Results and Conclusion : Among five major categories, medical staffs regard education, research, and medical services more important than other activities in and out of the hospital. Five categories consisted of two or three components. Departments in hospital were grouped into three. However, characteristics of each group was not clearly delineated. This result suggests that more comprehensive tool should be developed and applied in the process of performance evaluation in university hospitals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.305-313
• /
• 2011

This paper presents a P2P (Peer-to-Peer) overlay multicast tree construction algorithm to support stable multimedia service over the Internet. While constructing a multicast tree, it takes into account not only the link delay, but also peer stability. Since peers actually show dynamic and unstable behavior over P2P-based network, it is essential to consider peer stability. Furthermore, the weighting factor between link delay and peer stability is adaptively controlled according to the characteristics of the multicast tree. Basically, Genetic algorithm is employed to obtain a near optimal solution with low computational complexity. Finally, simulation results are provided to show the performance of the proposed algorithm.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.8 no.2
• /
• pp.11-17
• /
• 1984

The purpose of this study was to explore the characteristics of Fashion leadership in relation to social partipation, mass communication, and socioeconomic level among married women living in Seoul. Fashion opinion leadership was measured by Schrank Fashion Opinion Leadership Inventory. Fashion Preference Scale was designed to determinefashion innovativeness. Social parti-cipationana mass communication were assessed by selected items from the inventory of Summer and Kim. Hollingshead's two-factor index and weighting system was selected to assess socioeconomic level. The questionnaires were adminstered to a random sample of married women in Seoul. The date for 214 respondents were analyzed by Pearson correlation, analysis of variance, and t-teat. The results were as followers : 1) Fashion opinion leadership was significantly related to fashion preference. 2) Fashion leadership was significantly related to social participation, mass communication, socioeconomic level. 3) There was a significant difference between fashion leadership and age. 4) Women's occupation had little influence on fashion opinion leadership as well as fashion preference.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.6
• /
• pp.1535-1547
• /
• 2017

The purchase of information protection products accounts for the largest portion of corporate information protection activity budgets. However, there are no evaluation factors and evaluation models that should be applied to objectively compare information protection products, and therefore, product selection is difficult. Therefore, in this study, we study the inherent quality characteristics of information security products and select evaluation factors accordingly. The selected evaluation factors are analyzed and a quality determination model is given by weighting according to importance. The target is limited to the network information protection product and can be extended to all information protection products.

• ETRI Journal
• /
• v.46 no.4
• /
• pp.708-715
• /
• 2024

We propose a 10-GHz 2 × 2 phased-array radio frequency (RF) receiver with an 8-bit linear phase and 15-dB gain control range using 65-nm complementary metal-oxide-semiconductor technology. An 8 × 8 phased-array receiver module is implemented using 16 2 × 2 RF phased-array integrated circuits. The receiver chip has four single-to-differential low-noise amplifier and gain-controlled phase-shifter (GCPS) channels, four channel combiners, and a 50-Ω driver. Using a novel complementary bias technique in a phase-shifting core circuit and an equivalent resistance-controlled resistor-inductor-capacitor load, the GCPS based on vector-sum structure increases the phase resolution with weighting-factor controllability, enabling the vector-sum phase-shifting circuit to require a low current and small area due to its small 1.2-V supply. The 2 × 2 phased-array RF receiver chip has a power gain of 21 dB per channel and a 5.7-dB maximum single-channel noise-figure gain. The chip shows 8-bit phase states with a 2.39° root mean-square (RMS) phase error and a 0.4-dB RMS gain error with a 15-dB gain control range for a 2.5° RMS phase error over the 10 to10.5-GHz band.

• Economic and Environmental Geology
• /
• v.29 no.5
• /
• pp.615-622
• /
• 1996

Slope stability analysis was conducted using remote sensing and Geoscientific Information System (GIS) as a part of natural hazard assessment around Chungju area. Landsat TM band 5 and 7 which contain more information about geological structure and geography are chosen and processed to analyse regional geological structure. Through image processing technique such as PCA, HFF, edge detection and enhancement, regional lineament can be mapped and identified. The lineament density map is constructed based on summed length of lineaments per unit area and the study area can be divided into 7 structural domains. Various factors of slope stability analysis such as geology, slope aspect, degree of slope, landcover, water shed as well as characterized structural domain are constructed as a database of GIS. Rating and weighting of each factor for slope stability analysis is decided by considering environmental geological characteristics of study area. Spatial analysis of regional slope stability is examined through overlaying technique of the GIS. The result of areal distribution of slope stability shows that the most unstable area is all over Jaeogae-ni, Hyangsan-ni and Mt. Daedun.

• Journal of the Korean Society of Visualization
• /
• v.15 no.2
• /
• pp.48-58
• /
• 2017

To analyze bubbles generated by an ABB (Air Bubble Barrier), we developed image processing procedure and statistical analysis method. Air was discharged from 5 mm nozzle as swarm form at the bottom of 1 m3 water tank. Flow rates of discharged air are ranged from 2 L/min to 20 L/min and these are corresponding to Reynolds number of 1766-17663. Rise velocity of bubble is extracted by using image process pretending intrusive method. Mean equivalent velocity was calculated using void fraction weighting factor. Bubble diameter is obtained and compared with correlations in the literature. Also, we present a correlation according to the result of this study. Mean velocity and mean diameter of bubbles increase with increasing gas Reynolds number. But these parameters show an asymptotic trend when they approach to high Reynolds number.

• Tunnel and Underground Space
• /
• v.24 no.5
• /
• pp.386-394
• /
• 2014

Drilling accuracy is known to be one of the most important factors determining blasting efficiency in mining by blast operation. Therefore analysing the causes of drilling error and preparing a countermeasure for minimizing drilling error are very important for blasting efficiency and safety. In this study, causes of drilling error are analyzed with dividing them into controllable factors and uncontrollable factors, and relationship between each cause is also comprehended through field measurement and AHP analysis. Finally, effective measures to help lower the drilling error are proposed with the results from weighting analysis for each factor.

• KIEAE Journal
• /
• v.12 no.1
• /
• pp.3-10
• /
• 2012

Recently, the increase of impervious area has been pointed out as a major cause of climate change and biotop area deterioration]. Therefore, quantitative indicators for environmental housing design and planning have been needed especially to control the impervious area. The Biotop Area Ratio(BAR) as the mostly applied environmental planning control instrument in Korea verifying the possibility of utilizing has been used effectively in various aspects. However, the fact that the space types are based on two dimension and ecological functions of spaces are simplified has shown the limitations of this planning instrument in the use as planning and evaluation indicator. In this study, classification criteria and the weighting of the space types in similar indicators Biotopflaechenfaktor (BFF, Berlin), Seattle Green Factor (SGF, Seattle), and Green Area Factor (GAF, Malmo) were analyzed. These indicators are similar in the sense that they apply weights to calculate the area and express a percentage of land area. The findings are as follows: The basic method that can estimate the vegetation volume is proposed to overcome the limitation of the BAR. It also was proven that the introduction of three-dimensional volume rate of biotops area was possible. Finally, the framework of space type classification criteria is proposed through linkages with relevant laws and regulations. With the improvement of the space types, the BAR is expected to be reasonable indicator in outdoor space evaluation in housing project.