• Journal of Mechanical Science and Technology
• /
• v.18 no.3
• /
• pp.379-387
• /
• 2004

A novel flatness sensing system which is called the Flatness Sensing Inter-stand Looper(FlatSIL) system is suggested and a self-tuning PI control system using the FlatSIL is designed for improving the flatness of hot strip in finishing mill processes. The FlatSIL system measures the tension along the direction of the strip width by using segmented rolls, and the tension profile is approximated through the tension of each segmented roll. The flatness control system is operated by using the tension profile. The proposed flatness control system as far as the tension profile-measuring device works for the full strip length during the strip rolling in finishing mills. The generalized minimum variance self-tuning (GMV S-T) PI control method is applied to control the flatness of hot strip which has a design parameter as weighting factor for updating the PI gains. Optimizing the design parameter in the GMV S-T PI controller, the Robbins-Monro algorithm is used. It is shown by the computer simulation and experiment that the proposed GMV S-T PI flatness control system has better performance than the fixed PI flatness control system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.56
• /
• pp.65-85
• /
• 2000

Industrial accidents have been consistently increased in terms of medical costs, lost work days, and incidence rates every year in Korea. Since the infrastructure of the industry changed shifts rapidly from 1980s in the developing countries such as South Korea, the nature and magnitude of the industrial accidents have also undergone a major shift. The situation is especially severe in small-to-medium sized industry(SMI). This article reports the development of a systematic evaluation system of risk factors specifically for the SMIs. The new approach introduced by this article is geared to the systematic identification and evaluation of the injuries from power press machines using the Analytic Hierarchy Process with the key evaluation data generated and evaluated by the employees on site. A total of 21 companies was studied and surveyed using the hierarchical structures of the cause-effect relationship of the mechanical injuries and their countermeasures. For the relative weighting of each risk factor, separate questionnaire survey was conducted for the selected workers from each company who had worked for more than 10 years in press work. Most participants (48 out of 62) replied that human attributes were the most significant factors for mechanical injuries fellowed by administration, machine, and work environment factors. The result also showed that the self-motivated risk assessment and safety enhancement activities would be an effective and efficient way of managing the risk factors in the SMIs.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.2
• /
• pp.41-49
• /
• 2016

Lossless encryption methods are more applicable than lossy encryption methods when marginal distortion is not tolerable. In this research, the author propose a novel lossless symmetric key encryption/decryption technique. In the proposed algorithm, the image is transformed into the frequency domain using the lifting wavelet transform, then the image sub-bands are encrypted in a such way that guarantees a secure, reliable, and an unbreakable form. The encryption involves scattering the distinguishable frequency data in the image using a reversible weighting factor amongst the rest of the frequencies. The algorithm is designed to shuffle and reverse the sign of each frequency in the transformed image before the image frequencies are transformed back to the pixel domain. The results show a total deviation in pixel values between the original and encrypted image. The decryption algorithm reverses the encryption process and restores the image to its original form. The proposed algorithm is evaluated using standard security and statistical methods; results show that the proposed work is resistant to most known attacks and more secure than other algorithms in the cryptography domain.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.126-131
• /
• 2004

The interaction between the hypersonic free stream and the side jet flow at high altitudes is investigated by direct simulation Monte Carlo(DSMC) method. Since there is a great difference in density between the free stream and the side jet flow, the weighting factor technique which could control the number of simulation particles, is applied to calculate these two flows simultaneously. Chemical reactions are not considered in the calculation. For validation, the corner flow passing between a pair of plates that are perpendicularly attached is solved. The side jet flow is then injected into this comer flow and solution is found for the merged flow. Results are compared with the experiments. For a more realistic rocket model, the flow past a blunted cone cylinder shape is solved. The leeward or windward jet injection is merged with this flow. The effect on the rocket surface is observed at various flow angles. The lambda effect and the wake structure are found like low attitudes. High interaction between the free stream and the side jet flow is observed when the side jet is injected in the windward direction.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.1
• /
• pp.66-76
• /
• 2011

The heat transfer and pressure loss characteristics of a rotating two-pass channel with a guide vane in the turning region have been studied using three-dimensional Reynolds-averaged Navier-Stokes (RANS) analysis, and the shape of the guide vane has been optimized using surrogate modeling optimization technique. For the optimization, thickness, location and angle of the guide vanes have been selected as design variables. The objective function has been defined as a linear combination of the heat transfer and the friction loss related terms with a weighting factor. Latin hypercube sampling has been applied to determine the design points as design of experiments. A weighted-average surrogate model, PBA has been used as the surrogate model. The guide vane in the turning region does not influence the heat transfer in the first passage upstream of the turning region, but enhances largely the heat transfer in the turning region and the second passage. In an example of the optimization, the objective function has been increased by 13.6%.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.3
• /
• pp.305-313
• /
• 2009

This paper provides a method for evaluating a residual life of water mains using a proportional hazard model(PHM). The survival time of individual pipe is defined as the elapsed time since installation until a break rate of individual pipe exceeds the Threshold Break Rate. A break rate of an individual pipe is estimated by using the General Pipe Break Model(GPBM). In order to use the GPBM effectively, improvement of the GPBM is presented in this paper by utilizing additional break data that is the cumulative number of pipe break of 0 for the time of installation and adjusting a value of weighting factor(WF). The residual lives and hazard ratios of the case study pipes of which the cumulative number of pipe breaks is more than one is estimated by using the estimated survival function. It is found that the average residual lives of the steel and cast iron pipes are about 25.1 and 21 years, respectively. The hazard rate of the cast iron pipes is found to be higher than the steel pipes until 20 years since installation. However, the hazard rate of the cast iron pipes become lower than the hazard rates of the steel pipes after 20 years since installation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1993.06b
• /
• pp.19-44
• /
• 1993

The purpose of this paper is to study the design and the construction for the most economic and safe slope stability analysis. The approach to the purpose Iies in analyzing the characteristic on direction and distance by the sample value for the geotechnical parameters using the semi-variogram concept. Based on the result, we derive the Kriging system equation from the stochastical concept and solve the equation to find the weighting factor which is applied both the point estimation and the block estimation in the particular position. Comparing and analyzing the various methods. we find the best reliability, which is more accurate than any other.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.2
• /
• pp.73-81
• /
• 1997

The main purpose of this study was to develop a new method for evaluation of stream naturalness in order to appraise and prescribe for streams effectively in the process of ecological restoration of stream corridors. The results are as follows : 1) For this purpose six factors were selected on considering the spatial axes of stream corridor variation and total 20 descriptors about the physical structure were selected. 2) The calculation of S.N.I. for each segment was consisted of three steps, such as calculation of S.N.I.s of the individual descriptors, averaging all the descriptors's for each factor, and finally averaging the factors's for the Total S.N.I. 3) The evaluation unit was decided to be 100m size. The score system ranging 1~5 was adopted. Weighting parameters of factors were unified with each other. 4) A GIS model was adopted for classification, calculation, querying, analysing, and presenting S.N.I. information. And the format of S.N.I. maps including statistical graphs and other spatial watershed information was designed for the GIS odel. The naturalness of stream corridor was was investigated by the naturalness of habitat, and assessed by the descriptors focused on physical structure, therefore the S.N.I. can manifest prescriptions for restoration of the stream corridor. On the other hand because some evaluation factors such as water quality, water volume, fauna, flora, functions of stream exosystem has been excluded, S.N.I. could have some limits on representing the full aspects of stream naturalness. This evaluation method is hypothetical one, so it would be investigated through iterative applicatons.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.131-138
• /
• 2016

In order to improve the performance of an extended Kalman filter, a simplified indirect inference method (SIIM) fuzzy logic system (FLS) is proposed. The proposed FLS is composed of two fuzzy input variables, four fuzzy rules and one fuzzy output. Two normalized fuzzy input variables are the variance between the trace of a prior and a posterior covariance matrix, and the residual error of a Kalman algorithm. One fuzzy output variable is the weighting factor to adjust for the Kalman gain. There is no need to decide the number and the membership function of input variables, because we employ the normalized monotone increasing/decreasing function. The single parameter to be determined is the magnitude of a universe of discourse in the output variable. The structure of the proposed FLS is simple and easy to apply to various nonlinear state estimation problems. The simulation results show that the proposed FLS has strong adaptability to estimate the states of the incoming/outgoing moving objects, and outperforms the conventional extended Kalman filter algorithm by providing solutions that are more accurate.

• Journal of Korean Society for Quality Management
• /
• v.47 no.4
• /
• pp.895-910
• /
• 2019

Purpose: The purpose of this study is to lighten the APU (Auxiliary Power Unit) structure of the KAAV (Korea Assault Amphibious Vehicle) through structural analysis. Methods: Commercially-available program (MIDAS.NFX) was used for finite element analysis. Frequency response analysis was performed through linear static and mode analyses to verify the structural stability according to the change of the structural materials. Results: Numerical simulation (linear static, mode and frequency response analyses) results showed that the safety factor of the APU was over 1.5 even under the worst case conditions. The APU made by aluminum structures was expected to be available in the military field, since every requirements in the KDS (Korean Defense Specifications) was fulfilled during the various tests and evaluations. Conclusion: The structural analysis was verified that the structural stability of the APU structure of the KAAV after change of the structural material.