• 제어로봇시스템학회논문지
• /
• 제14권2호
• /
• pp.156-160
• /
• 2008

A localization system to estimate the position as well as movement direction of mobile robots is proposed in this paper. This system implements a camera fixed on a robot and color patches evenly distributed and mounted on the planar ceiling. Different permutations of patch colors code information about robot localization. Thus, extraction of color information from patch images leads to estimation of robot position. Additionally, simple geometric indicators are combined with patch colors to estimate robot's movement direction. Since only the distribution of patch colors has to be known, the analysis of patch images to is relatively fast and simple. The proposed robot localization system has been successfully tested for navigation of sample mobile robot. Obtained test results indicate the robustness and reliability of proposed technique for robot navigation.

• 제어로봇시스템학회논문지
• /
• 제16권4호
• /
• pp.368-373
• /
• 2010

A new indoor mobile robot localization method is presented. Robot recognizes well designed single color landmarks on the ceiling by vision system, as reference to compute its precise position. The proposed likelihood prediction based method enables the robot to estimate its position based only on the orientation of landmark.The use of single color landmarks helps to reduce the complexity of the landmark structure and makes it easily detectable. Edge based optical flow is further used to compensate for some landmark recognition error. This technique is applicable for navigation in an unlimited sized indoor space. Prediction scheme and localization algorithm are proposed, and edge based optical flow and data fusing are presented. Experimental results show that the proposed method provides accurate estimation of the robot position with a localization error within a range of 5 cm and directional error less than 4 degrees.

• Advances in aircraft and spacecraft science
• /
• 제1권4호
• /
• pp.455-469
• /
• 2014

High-precision autonomous localization technique is essential for future Mars rovers. This paper addresses an innovative integrated localization algorithm using a multiple information fusion approach. Firstly, the output of IMU is employed to construct the two-dimensional (2-D) dynamics equation of Mars rover. Secondly, radio beacon measurement and terrain image matching are considered as external measurements and included into the navigation filter to correct the inertial basis and drift. Then, extended Kalman filtering (EKF) algorithm is designed to estimate the position state of Mars rovers and suppress the measurement noise. Finally, the localization algorithm proposed in this paper is validated by computer simulation with different parameter sets.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권9호
• /
• pp.4418-4437
• /
• 2017

In this paper a three-phase secure compressive sensing (CS) and received signal strength (RSS) based target localization approach is proposed to mitigate the effect of malicious node attack. RSS measurements are first arranged into a group of subsets where the same measurement can be included in multiple subsets. Intermediate target position estimates are then produced using individual subsets of RSS measurements and the CS technique. From the intermediate position estimates, the residual error vector and residual error square vector are formed. The least median of residual error square is utilized to define a verifier parameter. The selected residual error vector is utilized along with a threshold to determine whether a node or measurement is under attack. The final target positions are estimated by using only the attack-free measurements and the CS technique. Further, theoretical analysis is performed for parameter selection and computational complexity evaluation. Extensive simulation studies are carried out to demonstrate the advantage of the proposed CS-based secure localization approach over the existing algorithms.

• 한국소음진동공학회논문집
• /
• 제23권2호
• /
• pp.152-159
• /
• 2013

A structural health monitoring(SHM) technique for locating impact position in a composite plate is presented in this paper. The technique employs a single sensor and spatial focusing properties of time reversal(TR) and inverse filtering(IF). We first examine the focusing effect of back-propagated signal at the impact position and its surroundings through simulation. Impact experiments are then carried out and the localization images are found using the TR and IF signal processing, respectively. Both techniques provide accurate impact location results. Compared to existing techniques for locating impact or acoustic emission source, the proposed methods have the benefits of using a single sensor and not requiring knowledge of material properties and geometry of structures. Furthermore, it does not depend on a particular mode of dispersive Lamb waves that is frequently used in the SHM of plate-like structures.

• Ocean Systems Engineering
• /
• 제9권4호
• /
• pp.391-407
• /
• 2019

Tracking the location (position) of a surface or underwater marine vehicle is important as part of guidance and navigation. While the Global Positioning System (GPS) works well in an open sea environment but its use is limited whenever testing scaled-down models of such vehicles in the laboratory environment. This paper presents the design, development and implementation of a low energy ultrasonic augmented single beacon-based localization technique suitable for such requirements. The strategy consists of applying Extended Kalman Filter (EKF) to achieve location tracking from basic dynamic distance measurements of the moving model from a fixed beacon, while on-board motion sensor measures heading angle and velocity. Iterative application of the Extended Kalman Filter yields x and y co-ordinate positions of the moving model. Tests performed on a free-running ship model in a wave basin facility of dimension 30 m by 30 m by 3 m water depth validate the proposed model. The test results show quick convergence with an error of few centimeters in the estimated position of the ship model. The proposed technique has application in the real field scenario by replacing the ultrasonic sensor with industrial grade long range acoustic modem. As compared with the existing systems such as LBL, SBL, USBL and others localization techniques, the proposed technique can save deployment cost and also cut the cost on number of acoustic modems involved.

• 한국정보통신학회논문지
• /
• 제14권6호
• /
• pp.1493-1504
• /
• 2010

이동 사용자의 위치 정보를 제공하는 위치인식서비스는 센서네트워크가 제공하는 대표적인 서비스이다. 그동안 이동 사용자의 위치정보를 획득하기 위한 다양한 기법들이 제시되어 왔다. 하지만 대부분의 기법들은 단일 사용자인 경우만 고려하여 연구되어 이를 다중 사용자인 경우로 확장하기에는 문제가 있다. 여러 이동 사용자들이 한 지역에서 동시에 위치인식 작업을 수행하는 경우에 센서노드들이 발생시키는 라디오 주파수나 초음파 등이 서로 간에 간섭을 발생시킬 수 있다. 본 논문에서는 여러 이동 사용자들이 동시 다발적으로 위치확인 작업을 수행하고자 하는 경우에 발생 가능한 간섭을 회피하도록 하는 LME기법을 제안한다. LME기법은 센서노드가 위치인식 작업을 수행하기 전에 주위에 있는 앵커노드를 선점하여 점유함으로써 노드간의 간섭을 방지한다. 이를 위해 IEEE 802.11에 정의된 CTS패킷을 자원 선점을 요청하는데 사용하며 RTS패킷을 자원 선점을 확인하는데 사용한다. 반대로 이미 앵커노드가 다른 노드에 의해 선점하여 위치인식 작업을 방해할 가능성이 있는 경우 해당 앵커노드들을 임계영역으로 정의한다. 임계영역 처리를 위한 NTS 패킷을 새로이 정의하여 노드 간에 간섭이 발생하지 않도록 한다. 추가적으로 거리측정 작업시 앵커노드간 동기화를 위한 STS패킷을 새로이 정의한다. 실험을 통하여 이동 사용자가 다수일 경우 노드 간에 간섭이 많이 발생함을 보이며 제안하는 LME기법이 위치인식 작업시 간섭을 방지함을 보인다.

• 제어로봇시스템학회논문지
• /
• 제15권2호
• /
• pp.211-217
• /
• 2009

This paper proposes a way of expanding the use area of localization technique by using a beacon. In other words, we have developed the auto-calibration algorithm that recognizes the location of this beacon by attaching the beacon on an arbitrary position and by using the information of existing beacon under this situation. By doing so, the moving robot can overcome the limitation that the localization of moving robot is only possible within the area that has installed the existing beacon since the beacon cannot be installed on the accurate location when passing through a danger zone or an unknown zone. Accordingly, the moving robot can slowly move to the unknown zone according to this auto-calibration algorithm and can recognize its own location at a later time in a safe zone. The localization technique is essentially needed in using a moving robot and it is necessary to guarantee certain degree of reliability. Generally, moving robots are designed in a way to work well under the situation that the surroundings is well arranged and the localization techniques of using camera, laser and beacon are well developed. However due to the characteristics of sensor, there may be the cases that the place is dark, interfering radio waves, and/or difficult to install a beacon. The effectiveness of the method proposed in this paper has been proved through an experiment in this paper.

• Smart Structures and Systems
• /
• 제6권5_6호
• /
• pp.561-578
• /
• 2010

This study proposes a multi-level damage localization strategy to achieve an effective damage detection system for civil infrastructure systems based on wireless sensors. The proposed system is designed for use of distributed computation in a wireless sensor network (WSN). Modal identification is achieved using the frequency-domain decomposition (FDD) method and the peak-picking technique. The ASH (angle-between-string-and-horizon) and AS (axial strain) flexibility-based methods are employed for identifying and localizing damage. Fundamentally, the multi-level damage localization strategy does not activate all of the sensor nodes in the network at once. Instead, relatively few sensors are used to perform coarse-grained damage localization; if damage is detected, only those sensors in the potentially damaged regions are incrementally added to the network to perform finer-grained damage localization. In this way, many nodes are able to remain asleep for part or all of the multi-level interrogations, and thus the total energy cost is reduced considerably. In addition, a novel distributed computing strategy is also proposed to reduce the energy consumed in a sensor node, which distributes modal identification and damage detection tasks across a WSN and only allows small amount of useful intermediate results to be transmitted wirelessly. Computations are first performed on each leaf node independently, and the aggregated information is transmitted to one cluster head in each cluster. A second stage of computations are performed on each cluster head, and the identified operational deflection shapes and natural frequencies are transmitted to the base station of the WSN. The damage indicators are extracted at the base station. The proposed strategy yields a WSN-based SHM system which can effectively and automatically identify and localize damage, and is efficient in energy usage. The proposed strategy is validated using two illustrative numerical simulations and experimental validation is performed using a cantilevered beam.

• Smart Structures and Systems
• /
• 제3권2호
• /
• pp.201-217
• /
• 2007

An active damage detection technique is introduced to locate damage in an isotropic plate using Lamb waves. This technique uses a time-domain energy model of Lamb waves in plates that the wave amplitude inversely decays with the propagation distance along a ray direction. Accordingly the damage localization is formulated as a least-squares problem to minimize an error function between the model and the measured data. An active sensing system with integrated actuators/sensors is controlled to excite/receive $A_0$ mode of Lamb waves in the plate. Scattered wave signals from the damage can be obtained by subtracting the baseline signal of the undamaged plate from the recorded signal of the damaged plate. In the experimental study, after collecting the scattered wave signals, a discrete wavelet transform (DWT) is employed to extract the first scattered wave pack from the damage, then an iterative method is derived to solve the least-squares problem for locating the damage. Since this method does not rely on time-of-flight but wave energy measurement, it is more robust, reliable, and noise-tolerant. Both numerical and experimental examples are performed to verify the efficiency and accuracy of the method, and the results demonstrate that the estimated damage position stably converges to the targeted damage.