This study investigates Korean fighter pilot's usage and satisfaction of a flight duty uniform (FDU). The survey was conducted from October 2014 to March 2015 using Focus Group Interview (FGI) and questionnaires. FGI collected qualitative data about duty and requirements; subsequently, surveys were performed to collect quantitative data about wearing conditions and satisfaction with FDU. The results of the FGI and the questionnaire were as follows. Type of pilot duty was divided into two parts, flight duty and ground duty. It is important to consider duties as well as factors related to survival when developing FDU. According to anthropometric data and wearing size, the basic size for apparel grading should be changed from actual size, 'M95XL' to 'M100L'. It is also necessary to improve the whole sizing system. Further studies about body form changes in pilot's movement are needed to improve mobility because the respondents perceived some restrictions at several body parts in movement with the coverall uniform. Summer FDU had a low satisfaction level in vent hole function and appearance. Furthermore, protection problems in the vent hole were also an issue. Making a seasonal classification of FDU fabric will be more effective than a vent hole to increase a pilot's thermal satisfaction. Respondents had a passive stance towards FDU reform (including pocket change); therefore, a new FDU design strategy should concentrate on improving current FDU functions like mobility (or comfort) rather than dramatic changes. Pilots complained about the quality stability of FDU; therefore, quality control by military administration as well as concrete and clear design instructions by the developer should be attained together. The results obtained in this study are expected to be used as an important basis for the further development of FDU.
배경: 폐암은 근치적 절제술이 가장 좋은 치료법이나 수술 후에 재발한 경우나 수술 시기가 지난 경우에는 항암 화학요법의 중요성이 강조된다. 항암 치료 전에 감수성 있는 항암 화학 치료제가 선별되어진다면 치료 효과를 극대화할 수 있다. 신피막하 분석법은 흉, 복부 종양의 생체 내 검사법으로 중요성이 인정되고 있고 항암 감수성 검사로서도 짧은 기간 내에 판별이 가능한 이점이 있다. 신장은 각종 암세포의 이식 장소로 잘 알려져 있으나 비장이나 간에서의 이식 성적을 비교한 연구는 없는 실정이다. 인체 암세포 이식의 실험방법 중에 비장과 간장에 암 세포주를 이식하였을 경우와 신장에 시행되는 신피막하 분석법에 의한 성장의 차이점 유무를 평가하였다. 대상 및 방법: 인체 폐암 세포주(SW-900 G IV)를 RPMI 1640 (Leibovitz L-15 medium)배지에서 배양하여 fibrin clot으로 만들어 $10^{8}$ 개의 암세포가 포함되도록 한 후 3${\times}$${\times}$3mm의 크기로 Spague Dawely (S.D.) 암컷 쥐의 신, 비장 및 간 피막하에 이식하였다. 이식 후 1일부터 6일간 면역억제를 위하여 cyclosporin-A (80 mg/kg)를 피하투여하였다. 이식 전후 실험동물의 체중 변화, 종양의 성장 여부 및 종양의 크기를 계측하고 병리 조직 검사와 혈청 내 암 표지자 검사를 실시하여 비교하였다. 걸과: 실험 5.D. 쥐의 체중 변화는 대조군이나 실험 군 모두에서 체중 증가가 있었다. 혈청 내 암 표지자의 정량 검사 결과 Cyfra 21-1은 검출되지 않았고, CEA및 NSE는 의미 있는 변화가 없었으며, SCC-Ag이 실험 군에서 유의한 증가가 있었다. 비장에 이식한 폐암 세포주의 성장이 신장 및 간장에 비해 더 증가된 결과를 보였다. 표면적, 두께와 용적 모두가 비장에서 유의한 증가를 나타내었다. 이식 성공률은 신장이 80%, 비장이 76.7%, 간장이 43.3%이었다. 병리학적 검사 결과 신장에는 비교적 둥글게 성장하며 크기는 제일 작았으며 성장 방향이 일정한 모양을 보이는 특징이 있으며 비장은 성장이 잘되어 제일 큰 종양을 형성하나 불규칙한 성장과 위성 종양(satellite tumor)이 빈번히 발견되었으며 현미경적으로는 혈관 신생과 함께 종양 혈전이 발견되었다. 간장은 간 내부로 침투 성장하여 이식 성공률이 가장 저조하며 현미경적 소견은 응고성 괴사와 점액양 섬유성 병변을 가지는 특징을 보였다. 걸론: 이식 성공률은 신장과 비장이 높으나, 성장이 일정하고 계측이 용이한 것은 신장이었다. 혈청 암 표지자는 SCC-Ag이 가장 조기에 반응하였으며, Cyfra 21-1은 조기에 검출되지 않았다. 이상에서 감수성 검사를 위한 종양이식 실험에 이용하기에 가장 적합한 장기는 신장을 이용한 신피막하 이식법으로 생각되며, 조기에 유용한 암표지자 검사는 SCC-Ag 정량법이라고 판단된다.
미세 플라스틱은 입자의 크기가 5 mm 이하인 플라스틱 조각을 말하며 미세 플라스틱의 오염은 해양 생태계와 인간의 건강과 관련되어 전 세계적인 관심사이다. 광범위하게 오염되어 있는 관계로, 미세 플라스틱은 물고기, 담치, 굴, 조개, 가리비와 같이 다양한 동물에 섭취되어 체내에 축적된다. 게다가, 섭취된 미세 플라스틱은 소장, 간, 신장 그리고 심지어 뇌에서도 높은 농도로 관찰된다. 해산물은 인간에게 있어 주요 단백질 공급원 중 하나이므로, 해산물의 소비는 인간이 미세 플라스틱에 노출되는 경로가 될 수 있다. 많은 근거들은 설치류에서 미세 플라스틱의 반복적인 경구 투여가 생식, 심장, 소화기, 내분비 그리고 심지어 신경계에서 병리적, 기능적 변화를 유도함을 가리킨다. 더욱이, 임신기와 수유기 동안 모체가 미세 플라스틱에 노출되면 새끼에서 대사의 항상성에 변화가 일어난다. 해산물은 세계적으로 3억 1천만 명 이상의 사람들에게 20% 이상의 단백질 공급원이라는 사실을 고려할 때, 미세 플라스틱은 인간의 몸에 축적되어 생리적 기능에 장애를 유발할 수 있다고 가정하는 것이 타당하다. 본 리뷰에서 우리는 해양에서 미세 플라스틱 오염의 현재 실태와 해양 동물 및 설치류에서 미세 플라스틱의 축적과 독성, 그리고 인간에게의 노출과 인간 건강에 미치는 잠재적인 영향에 대해 요약하였다.
본 논문에서는 모노폴과 같은 방사특성을 갖고 인체 표면 간 통신을 위한 $TM_{31}$ 고차 모드 반원-링 마이크로스트립 패치 안테나를 제안하였다. 제안된 안테나는 단락 핀을 이용하여 $TM_{31}$ 고차 공진 모드를 형성하였고, 평면형임에도 불구하고 모노폴과 같은 방사특성을 갖는다. 패치안테나의 좁은 대역폭을 확장하기 위해 $TM_{31}$ 모드 C-형 반링 패치를 반원 패치에 인접시켰으며, 소형화를 위해 half mode를 사용하였다. 인체 착용환경을 고려하여 마이크로스트립 라인을 이용하여 급전하였다. 제안된 안테나는 ISM(Industrial, Scientific, and Medical) 2.45 GHz 대역(2.4~2.485 GHz)에서 $0.25{\lambda}_0{\times}0.46{\lambda}_0{\times}0.025{\lambda}_0$의 크기를 갖고, 2.38~2.49 GHz에서 4.24 %의 10-dB 반사손실 대역폭을 갖는다. 인체의 영향을 고려하기 위해 2/3 근육-등가 반고체형 모의인체를 제작하고, 이를 이용하여 안테나에 미치는 인체의 영향을 분석, 검증하였다. 또한, 실제 인체 상황에서 제안된 안테나를 통해 인체 표면 간 링크의 통신 성능 분석을 위한 실험을 수행하였다.
Purpose: The purpose of the present study was to examine the effects of the area of the base of support formed by the human body on the maximal voluntary isometric contraction of upper limb muscles. Methods: The study was conducted with 20 normal adults. To identify changes in the base of support, the maximal voluntary isometric contraction of the biceps muscle was measured in a standing position, a sitting position, and a lying position for each subject. The sizes of the base of support formed in the standing, sitting, and lying positions were set to 1, 2, and 3 respectively, based on the sizes, to analyze the correlations. The maximal voluntary isometric contraction of the biceps muscle was measured using surface electromyograms (EMGs) (Noraxon DTS, Germany). Results: The results showed negative correlations in which, as the size of the base of support increased, the maximal voluntary isometric contraction of the biceps muscle decreased. Conclusion: Changes in the base of support of the body affect the maximal voluntary isometric contraction of the upper limbs. Therefore, when resistance exercises are applied for muscle strengthening, the positions should be changed considering the changes in muscle activity according to those positions. In addition, when EMGs are used to measure the maximal voluntary isometric contraction, the measurements should be conducted in the same positions, considering muscle activity that changes according to the base of support and positions, for data quantification.
This study is intended to compare an actual wedding dress being made completely through 3D software, and compare it with an actual dress of a real model by using collective tools for comparative analysis. The method of the study was conducted via a literature review along with the production of the dresses. In the production, two wedding dresses for the small wedding ceremony were designed. Each of the design was made into both 3D and an actual garment. The results are as follows. First, the 3D whole body scanner reflects the measure of the exact human body size, however there were some difficulties in matching what the customer wanted, because the difference of the skin color and the hair style. Second, the pattern of the dress is much more easily altered than it was in the real production. Third, the silhouette of the virtual and the actual person with the dress was nearly the same. Fourth, textile tool was much more convenient because of the use of real-time rendering on the virtual dresses. Lastly, the lace and biz decoration were flat, and the luster was duller than in reality. Prospectively, the consumer will decide their own design of variety through the use of the avatar without wearing the actual dresses, and they would demand what the another one desired, different from the presented ones by making the corrections by themselves. Through this process, the consumer would be actively participating in the design, a step which would finally lead to the two way designing rather than the one way design of present times.
Risk assessment considers the situations and characteristics of the exposure environment and host. Various physiological variables of the human body reflects the characteristics of the population that can directly influence risk exposure. Therefore, identification of exposure factors based on the Korean population is required for appropriate risk assessment. It is expected that a handbook about general exposure factors will be used by professionals in many fields as well as the risk assessors of the health department. The process of developing the exposure factors handbook for the Korean population will be introduced in this article, with a specific focus on the general exposure factors including life expectancy, body weight, surface area, inhalation rates, amount of water intake, and soil ingestion targeting the Korean population. The researchers used national databases including the Life Table and the 2005 Time Use Survey from the National Statistical Office. The anthropometric study of size in Korea used the resources provided by the Korean Agency for Technology and Standards. In addition, direct measurement and questionnaire surveys of representative samples were performed to calculate the inhalation rate, drinking water intake, and soil ingestion.
Omran, Ahmed;Wertheim, David;Smith, Kathryn;Liu, Ching Yiu Jessica;Naini, Farhad B.
Maxillofacial Plastic and Reconstructive Surgery
/
제42권
/
pp.37.1-37.13
/
2020
Background: The human mandible is variable in shape, size and position and any deviation from normal can affect the facial appearance and dental occlusion. Objectives: The objectives of this study were to determine whether the Sassouni cephalometric analysis could help predict two-dimensional mandibular shape in humans using cephalometric planes and landmarks. Materials and methods: A retrospective computerised analysis of 100 lateral cephalometric radiographs taken at Kingston Hospital Orthodontic Department was carried out. Results: Results showed that the Euclidean straight-line mean difference between the estimated position of gonion and traced position of gonion was 7.89 mm and the Euclidean straight-line mean difference between the estimated position of pogonion and the traced position of pogonion was 11.15 mm. The length of the anterior cranial base as measured by sella-nasion was positively correlated with the length of the mandibular body gonion-menton, r = 0.381 and regression analysis showed the length of the anterior cranial base sella-nasion could be predictive of the length of the mandibular body gonion-menton by the equation 22.65 + 0.5426x, where x = length of the anterior cranial base (SN). There was a significant association with convex shaped palates and oblique shaped mandibles, p = 0.0004. Conclusions: The method described in this study can be used to help estimate the position of cephalometric points gonion and pogonion and thereby sagittal mandibular length. This method is more accurate in skeletal class I cases and therefore has potential applications in craniofacial anthropology and the 'missing mandible' problem in forensic and archaeological reconstruction.
The development of three-dimensional (3D) printing technology is bringing new innovations to various fields such as health care, architecture, and fashion. 3D printing can be manufactured to suit the size of the consumer's body, modify the design to meet their tastes, and produce small quantities of various products. Therefore, 3D printing in the field of fashion has great potential. The purpose of this study was to investigate various application models of 3D printing for fashion design and analyze their characteristics after developing the fashion garment samples. First, the background of 3D printing was reviewed then, fashion designed by a 3D printing application was analyzed. As a result, four types of 3D printing applications were developed: object-attached, linkage, kinematics, and assembly. The object-attached type was the method of printing 3D material as an object in the intended shape and form and was attached to the garment by sewing. The linkage type referred to printing 3D material in small pieces of certain shapes that could be linked. The kinematics type was structures with hinges that could flex to fit the human body. The assembly type referred to developing 3D materials in female and male pieces such as nuts and bolts. By providing the advantages, disadvantages, trial-and-errors, and challenges of the 3D printing fashion design process, this study contributes to the effective applications and possibilities of future design.
The effects of $MgO-P_2O_5$ based sintering additive on the microstructure and material and biological properties of hydroxyapatite $(HAp,\;Ca_{10}(PO_4)_6(OH)_2)$ ceramic were investigated using XRD, SEM and TEM techniques. The $MgO-P_2O_5$ sintering additive improved the material properties and increased the grain size in the sintered HAp bodies. As the content of sintering additive increased over 4 wt%, a small amount of the HAp phase was decomposed and transformed to ${\beta}-TCP$. In the 2 wt% $MgO-P_2O_5$ content HAp sintered body, the maximum values of density and hardness were respectively about 3.10 gm/cc and 657 HV. However, the maximum fracture toughness in the HAp body containing 8 wt% $MgO-P_{2}O_{5}$ was about $1.02MPa{\cdot}m^{1/2}$ due to the crack deflection effect. Human osteoblast like MG-63 cells and osteoclast like raw 264.7 cells were well grown and fully covered all of the HAp sintered bodies. The osteoblast cells were grown with spindle-shaped and the osteoclast cells had a grape-like round shape.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.