• 감성과학
• /
• 제8권3호
• /
• pp.253-263
• /
• 2005

본 연구에서는 제품의 선호도 평가를 위한 정보 탐색과정에서 영향을 미치는 요소에 대한 인지반응의 특성 파악을 기본 목적으로 하였다. 그리고 그 특성과 제품 선호도의 상관관계를 제품 사용 경험의 측면에서 고찰하였다. 이를 위하여, 휴대폰과 제안형 제품사진을 실험 자극으로 선정하여 두 단계의 실험을 진행하였다. 첫 번째 실험에서는 제시된 각 제품사진을 관찰한 후에 선호하는 순서를 정하여 배열하도록 하였다. 두 번째 실험에서는 앞에서 선정한 선호도 1순위와 10순위의 제품사진에 대하여 선호도 평가 시 최우선적으로 주목한 부분을 표시하고, 그 부분에 대하여 설명하도록 하였다. 실험 결과로부터 두 가지 결론이 도출되었다. 첫 번째, 제품의 사용 경험에 의한 경험적 기억 정보는 인지 대상의 선호도 평정(評定)에 있어, 그 인지 대상에 포함되어 있는 다양한 구성 요소에 대한 해석적 반응을 활성화한다. 두 번째, 제품의 비사용 경험은 선호도와 관계없이 인지 대상에 포함되어 있는 심미적 요소를 지각적으로 수용하는 반응을 유발한다.

• Environmental Engineering Research
• /
• 제17권2호
• /
• pp.117-122
• /
• 2012

A central composite design and response surface methodology were applied to investigate the optimum conditions for maximum adsorption capacity in activated alumina as an adsorbent. The optimized conditions were determined for adsorption capacity using variables of flow rate and temperature. It was found that flow rate and temperature greatly influenced the adsorption capacity, as determined by analysis of variance analysis of these variables. Statistical checks indicated that second order polynomial equations were adequate for representing the experimental values. The optimum conditions for adsorption capacity were $0^{\circ}C$ and 2,718 mL/min, with the estimated maximum adsorption capacity of 17.82%. The experimental adsorption capacity was 17.75% under these optimum conditions, which was in agreement with the predicted value of 17.82%.

• 응용통계연구
• /
• 제6권2호
• /
• pp.303-309
• /
• 1993

오차에 대한 함수관계식이 불확실한 경우 두가지 실험계획법을 제시하였다. 하나는 모든 가능한 오차함수식을 대상으로 최저의 효율성을 높이는 방안이고 다른 하나는 확률을 이용한 최저의 평균효율성을 높이는 방안이다. 이러한 두 방법을 D-와 이분산 G-최적성에 적응시켜 그 차이점을 비교연구하였다.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.580-593
• /
• 1998

2차 반응표면분석을 위한 부분합성계획은 실험 비용이 많이 들거나, 실험 자체가 어려워서 시간의 소비가 많은 경우, 실험오차의 독립추정이 가능할 때 효과적이다. 반응표면분석에서는 회전성과 기울기 회전성을 만족하는 것이 중요하다. 따라서 본 논문에서는 회전성과 기울기 회전성의 관점에서 부분합성계획을 살펴보고 또한 인자의 수와 중심점의 수가 변함에 따라서 어떤 a(중심에서 축점까지의 거리)의 값이 최적의 실험계획이 되도록 하는지를 연구하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.494-499
• /
• 2001

This research carried out the experimental manufacture of the improved fastening device and its performance test as well as the structural improvement of the prototype of a new type of fastening device developed through G7 Project during the first year of the second phase. Firstly, a supplementary design for each part of the prototype was carried out in order to improve its performance and a structural analysis in order to review the stress on the fastening spring. Secondly, another prototype was manufactured and then a performance test was carried out with the criteria used for the same kind of test on the authorized ones, both at home and abroad. Finally, the usability of the device was reviewed by comparing above-mentioned test result with that of those already under commercial use.

• 대한전기학회논문지
• /
• 제38권3호
• /
• pp.228-236
• /
• 1989

The theroy of variable structure control system (VSS) is applied to the position control for DC servo-motors. In order to use the microcomputer as a control device, the principles of VSS for the continuous-time system are extended to the discrete-time system. A new switching law is proposed to achieve the reduction of chattering. It adds a new switching structure to the conventional switching sturctures. This switching region is set near and including the conventional switching curve. The new algorithm is obtained for single-input second order system, and applied to the position control of a DC servo-motor. Experimental results show that the transient behavior is improved due to the reduction of chattering and good robustness properties are demonstrated.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.85-89
• /
• 1999

Numerical Analysis has been done for the supersonic off-design jet flow due to the pressure difference between the jet and the ambient fluid. The difference of pressure generates an oblique shock or an expansion wave at the nozzle exit, The waves reflect repeatedly at the center axis and on the sonic surface in the shear layer, and the pressure difference is resolved across these waves interacted with the turbulence mixing layer. In this paper, the axi-symmetric Navier-Stokes equation has been used with two equation $k-{\varepsilon}$ turbulence closure model. The second order TVD scheme with flux limiters, based on the flux vector split by the smooth eigenvalue split, has been used to capture internal shocks and other discontinuities. The correction term for the compressible flow and the damping function are used in the turbulence model. Numerical calculations have been done to analyze the off-design jet flow due to the pressure difference. The variation of pressure along the flow axis is compared with an experimental result and other numerical result. The characteristics of the interaction between the shock cell and the turbulence mixing layer have been analyzed.

• Steel and Composite Structures
• /
• 제9권1호
• /
• pp.1-17
• /
• 2009

This paper is focused on the buckling and post buckling behaviour of rectangular corrugated board panels simply supported and subjected to compression load. The aim of the work is to understand the failure mechanism of investigated structure in order to quantify the effect of design parameters on the strength of a panel of given geometry. Two numerical models were developed adopting the finite element method. In the first one the corrugated board is represented by means of shell elements adopting an equivalent material, in the second the local structure is described in full detail modelling both straight and corrugated layers by means of shell elements and representing the connection between layers by special interface elements. The model correctness was checked by the comparison between out of plane central displacement predicted by the models and the experimental values found in literature. For the same case the effect of panel planarity error was evaluated. Finally a parametric analysis to investigate the effect of design parameters was carried out.

• 제어로봇시스템학회논문지
• /
• 제9권4호
• /
• pp.270-276
• /
• 2003

The disturbance observer (DOB) has been widely utilized fer high precision and high speed motion control application. However, it still lacks the analysis for the robustness brought by using DOB. This paper summarizes six guidelines for the design of DOB taking into account the robustness and control performance in case of the second order system. For effectiveness of the proposed guideline, the actual implementation and experimental results of the DOB is compared in the Optical Disk Drive(ODD) servo system. In the DVD player and DVD-ROM drive, the guidelines of DOB are useful, and the disturbance rejection performance is improved under the DOB system.

• 소음진동
• /
• 제10권4호
• /
• pp.584-595
• /
• 2000

We design a new actuator for high density optical device in order to control the radial tilting motion. The newly designed actuator makes it possible to control the tilting motion actively, while the coventional actuator compress tilting motion with passive spring. First of all, We present 3-dimensional modeling of actuator and accomplish the modal analysis and magnetic analysis of actuator. Due to these results, a new designed actuator has performance of high sensitivity and high second resonance frequency. Secondly, We present the 3-DOF dynamic modeling of the 4-wire spring type actuator. sensitivity analysis is performed to consider the assembling error, such as the difference of mass center and force center. From these results, the sensitivities of rotation due to the assembly error are revealed and design criteria of rotation is presented. And experimental results of a newly designed actuator are presented and compared with theoretical results. Finally, We propose a dynamic tilt compensation and high acceleration actuator for high density optical storage devices.