• Earthquakes and Structures
• /
• 제22권6호
• /
• pp.571-584
• /
• 2022

The residual displacement ratio (RDRs) response spectra have been generally used as an important means to evaluate the post-earthquake repairability, and the ratios of residual to maximum inelastic displacement are considered to be more appropriate for development of the spectra. This methodology, however, assumes that the expected residual displacement can be computed as the product of the RDRs and maximum inelastic displacement, without considering the correlation between these two variables, which inevitably introduces potential systematic error. For providing an adequately accurate estimate of residual displacement, while accounting for the collapse resistance performance prior to the repairability evaluation, a probability-based procedure to estimate the residual displacement demands using the nonlinear static analysis (NSA) is developed for single-degree-of-freedom (SDOF) systems. To this end, the energy-based equivalent damping ratio used for NSA is revised to obtain the maximum displacement coincident with the nonlinear time history analysis (NTHA) results in the mean sense. Then, the possible systematic error resulted from RDRs spectra methodology is examined based on the NTHA results of SDOF systems. Finally, the statistical relation between the residual displacement and the NSA-based maximum displacement is established. The results indicate that the energy-based equivalent damping ratio will underestimate the damping for short period ranges, and overestimate the damping for longer period ranges. The RDRs spectra methodology generally leads to the results being non-conservative, depending on post-yield stiffness. The proposed approach emphasizes that the repairability evaluation should be based on the premise of no collapse, which matches with the current performance-based seismic assessment procedure.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.279-289
• /
• 2000

Residual stress induced in U-bending and tube-to-tubesheet joint processes of PWR's row-1 heat exchanger tube was measured by X-ray method and Hole-Drilling Method(HDM). Compressive residual stresses(-) at the extrados surface were induced in U-bending, and its maximum value reached -319 MPa in axial direction at the position of $\psi$ = $0^{\circ}$. Tensile residual stresses(+) of $\sigma_{zz}$ = 45 MPa and $\sigma_{\theta\theta}$ = 25 MPa were introduced in the intrados surface at the position of $\psi$ = $0^{\circ}$. Maximum tensile residual stress of 170 MPa was measured at the flank side at the position of $\psi$ = $90^{\circ}$, i.e., at apex region. It was observed that higher stress gradient was generated at the irregular transition regions (ITR). The trend of residual stress induced by U bending process of the tubes was found to be related with the change of ovality. The residual stress induced by the explosive joint method was found to be lower than that by the mechanical roll method. The gradient of residual stress along the expanded tube was highest at the transition region (TR), and the residual stress in circumferential direction was found to be higher than the residual stress in axial direction.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.238-246
• /
• 1998

Surface residual stresses as well as wall thickness and ovality changes after U-bending process on UNS N06690 row-1 heat exchanger tubes, were estimated. Surface residual stresses were measured by Hole Drilling Method(HDM), calculating the stresses from relieved strains of 3 rosette strain gages. After bending of the tubes, dimensional tolerances for wall thickness and ovality were satisfied with ASTM requirements. Residual stresses at the extrados were introduced with compressive stress(-) by bending operations, and its maximum value reached-319 MPa in axial direction at ${\phi}=0^{\circ}$ in position. Tensile residual stresses(+) of ${\sigma}_zz=45$ MPa,${\sigma}_zz=25$ MPa were introduced in the intrados surface at position of ${\phi}=0^{\circ}$ Maximum tensile residual stress of 170 MPa was detected on the flank side at position of ,${\phi}=95^{\circ}$i.e., at apex region. It appeared that higher stress gradients were generated at the irregular transition regions. In the trend of residual stress changes with U-bend position, the extrados is related with the changes of ovality and the intrados is related with the changes of wall thickness.

• 한국기계가공학회지
• /
• 제21권6호
• /
• pp.50-59
• /
• 2022

The design of the substrate significantly affects the thermal history and the residual stress formation in the vicinity of a repaired region by a directed energy deposition (DED) process. The occurrence of defects in the repaired region depends on the thermal history and residual stress formation. The objective of this study was to investigate the influence of the inclined angle and depth of the substrate on the thermal and residual stress characteristics in the vicinity of a repaired region by a DED process through two-dimensional finite element analyses (FEAs). The temperature and residual stress distributions in the vicinity of the repaired region were predicted according to the combination of the inclined angle and depth of the substrate. The effects of the inclined angle and depth on the depth of the heat affected zone and the maximum value of the residual stress were examined. A proper combination of the inclined angle and depth of the substrate was estimated to decrease the residual stress in the vicinity of the repaired region.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.33-40
• /
• 2021

Current industrial flow is directed toward reducing the usage of raw materials by reusing parts, which is referred to as a circular economy (CE). Repair is one of the most value-added approaches in CE, which can be efficiently accomplished via additive manufacturing. The repair technology of metallic parts via the directed energy deposition process, which includes the selective removal and redeposition of damaged regions of metallic parts. Residual stress characteristics depend on the shape of the part and the shape of the redeposition region. The objective of this study is to investigate the effects of the radius and corner position of the substrate on the residual stresses for repair by using finite element analysis (FEA). The residual stress distribution of the 45° angle groove at the edge of the circular shape models on the outer and inner radii was analytically investigated. The analysis was accomplished using SYSWELD software by applying a moving heat source with defined material properties and cooling conditions integrated into the FEA model. The results showed a similar pattern of concentrated stress distribution for all models except the 40-mm and 60-mm radii, for which the maximum stress locations were different. The maximum residual stresses are high but lower than the yield strength, suggesting the absence of cracks and fractures due to residual stresses.

• 한국압력기기공학회 논문집
• /
• 제18권2호
• /
• pp.61-68
• /
• 2022

Accurate evaluation of residual stress is important for stress corrosion cracking assessment. In this paper, electron beam welding experiment is simulated via finite element analysis and the sensitivity of the parameters related to the combined heat source model is investigated. Predicted residual stresses arecompared with measured residual stresses. It is found that the welding efficiency affects the size of the tensile residual stress area and the magnitude of maximum longitudinal residual stress. It is also found that the parameter related to the ratio of energy distributed to the two-dimensional heat source has little effect on the size of tthe tensile residual stress area, but affects the size of the longitudinal residual stress in the center of the weld.

• 한국의학물리학회지:의학물리
• /
• 제23권4호
• /
• pp.285-291
• /
• 2012

Si(Li) 검출기를 이용해 한국표준과학연구원에서 보유한 베타선 선원인 $^{147}Pm$, $^{85}Kr$, $^{90}Sr+^{90}Y$ 선원의 순수 베타선 에너지 스펙트럼을 측정하였고 이 측정 스펙트럼에 대한 잔여에너지와 질량충돌저지능비를 산출하였다. 베타선의 잔여에너지는 $^{147}Pm$, $^{85}Kr$, $^{90}Sr+^{90}Y$ 선원에 대하여 각각 0.14, 0.57, 0.93 MeV으로 평가되었고 질량충돌저지능비는 각각 1.123, 1.120, 1.109이었다.

• 대한전자공학회논문지TC
• /
• 제46권8호
• /
• pp.43-49
• /
• 2009

본 논문에서는 에러율이 높은 무선 센서 네트워크의 수명을 연장시키기 위한 라우팅 알고리즘을 제안한다 제안하는 기법은 무선 링크의 품질을 기반으로 하여 패킷을 송수신한 이후의 잔여 에너지를 미리 추정하고, 그 때의 에너지가 가장 많이 남아 있을 것으로 예상되는 경로로 데이터를 전송한다. 제안하는 기법은 에러율을 고려하기 때문에 불필요한 재전송에 따른 에너지 소비를 줄이고 트래픽도 골고루 분산시킨다. 그리고 송수신 이후의 잔여 에너지양들 중에서 최소값이 가장 클 것으로 예상되는 경로를 선택함으로써 노드의 에너지 고갈을 최대한으로 지연시킨다. 다른 방식들에 비하여 제안하는 기법이 네트워크의 수명을 더욱 연장시킨다는 사실을 실험을 통하여 확인할 수 있었다.

• Steel and Composite Structures
• /
• 제45권5호
• /
• pp.683-695
• /
• 2022

Conventional braces are often used to provide stiffness to structures; however due to buckling they cannot be used as seismic energy dissipating elements. In this study, a seismic energy dissipation device is proposed which is comprised of a bracing member and a steel hysteretic damper made of steel hexagonal plates. The hexagonal shaped designated fuse causes formation of plastic hinges under axial deformation of the brace. The main advantages of this damper compared to conventional metallic dampers and buckling-restrained braces are the stable and controlled energy dissipation capability with ease of manufacture. The mechanical behavior of the damper is formulated first and a design procedure is provided. Next, the theoretical formulation and the efficiency of the damper are verified using finite element (FE) analyses. An analytical model of the damper is established and its efficiency is further investigated by applying it to seismic retrofit of a case study structure. The seismic performance of the structure is evaluated before and after retrofit in terms of maximum interstory drift ratio, top story displacement, residual displacement, and energy dissipation of dampers. Overall, the median of maximum interstory drift ratios is reduced from 3.8% to 1.6% and the residual displacement decreased in the x-direction which corresponds to the predominant mode shape of the structure. The analysis results show that the developed damper can provide cost-effective seismic protection of structures.

• 한국시뮬레이션학회논문지
• /
• 제15권3호
• /
• pp.69-77
• /
• 2006

여기에 지오캐스팅(geocasting)이란 어떤 특정한 지역(지오캐스트 영역이라 함)에 있는 모든 노드들에게 데이터를 전송하는 통신형태이다. 기존의 에너지 관련 프로토콜은 주로 통신 경로 설정 시 주로 최소 홉 수, 즉 전송 에너지를 최소화하기 위한 최단거리 관점에서 최적의 경로를 구하며, 각 노드의 잔여 에너지와 링크 에러율에 대해 고려하지 않는 것이 대부분이다. 본 논문에서는 ad-hoc 네트워크에서 에너지 효율적이고 신뢰성 있는 전송을 하기 위한 지오캐스팅 방법인 MLRG를 제안한다. MLRG는 위치기반과 라우팅-기반인 지오캐스팅으로 각 노드의 잔여 전력을 파악한 경로 탐색과 새롭게 제안하는 cost 관계식을 통해 네트워크 활동시간을 최대화하고, 링크의 에러율도 고려하여 신뢰성 있는 통신이 가능하다.