• 한국공작기계학회논문집
• /
• 제14권1호
• /
• pp.101-107
• /
• 2005

The objective of this study is structural analysis and optimum shape of rope brake. The finite element model was implemented to compute the stress, strain and friction force for rope brake. The ANSYS code was used for this analysis. Structural analysis are effected by position and height of reinforcement figure. The structural safety was examined by an establishment angle of the rope brakes which made apply to housing of the most suitable shape. The optimum shape of the rope brake was decided after stress and strain results were compared and examined.

• 한국군사과학기술학회지
• /
• 제11권4호
• /
• pp.68-75
• /
• 2008

This paper proposes a new data hiding method for binary images using the weighting value of pixel-value differencing. The binary cover image is partitioned into non-overlapping sub-blocks and find the most suitable position to embed a secret bit for each sub-block. The proposed method calculates the weighted value for a sub-block to pivot a pixel to be changed. This improves the image quality of the stego-image. The experimental results show that the proposed method achieves a good visual quality and high capacity.

• Journal of Electrical Engineering and information Science
• /
• 제3권2호
• /
• pp.230-238
• /
• 1998

When size and shape of moving object have been changed, a correlator often accumulates walk-off error. A success of correlation-based tracking largely depends on choosing suitable window size and position and thus transferring the proper reference image to the next frame. For this, we propose the Adaptive Window Algorithm with Four-Direction Sizing Factors (AWA-FSF) for fast adjusting a reference region to enhance reliability of correlation-based image tracking in complex cluttered environments. Since the AWA-FSF is capable of adjusting a reference image size more rapidly and properly, we can minimize the influence of complex background and clutter. In addition, we can finely tune the center point of the reference image repeatedly after main tracking process. Thus we have increased stability and reliability of correlation-based image tracking. We tested performance of the AWA-FSF using 45 real image sequences made of over 3400 images and had the satisfied results for most of them.

• 경영과정보연구
• /
• 제17권
• /
• pp.67-81
• /
• 2005

Harbor function has been changed into physical distribution position harbor system for providing most suitable physical distribution service with comprehensive rationalization of international physical distribution over simple loading unloading, and change function by far. Thus, to change our country into advanced economy, the factor of growth obstacles was to be eliminated, or it is so important that the physical distribution base establishment enlarges to improve potential productivity. That is, self effort is needed for physical distribution competition system, adjustable arrangement of physical distribution area, the establishment of comprehensive informations system, physical distribution rationalization. Also, to enforce harbor productivity, harbor should be developed systemically to able to function of comprehensive harbor for enlargement of harbor establishment, the device of advanced harbor function height, the linkage between and city program, harbor operation or investment system provement, harbor technique or international cooperation advancement.

• 복식
• /
• 제35권
• /
• pp.195-210
• /
• 1997

Movie clothing is what is recreated as a character in work after being worn for actors (or actresses). And it is not added for heightening only fantasy but it acts for heightening only fantasy but it acts for reinforcing the side of character or subject. Especially the clothing in color movie gets to have very psychological effect. Thus Accord-ing to the clothing the effect of the represen-tation style may become large and small. So as to make the gesture or attitude of each character valuable in accordance with the ac-tion and expression of the figure clothing is different from other device essentially One may attain various goals through the color of movie clothing, First movie clothing may show the vogue color of the time and the representative time color, Second the color of movie clothing helps one to able to recognize the socio-econmic position of character easily as the color to symbolize the specific jobs such as nurse soldier and doctor etc. Third the color of movie clothing may show the charcter temperament as to whether one is young or old and whether one has pessi-mistic temperament or one is extrovert or introversive etc. easily. Fourth setting the clothing color of hero as the color to set off helps it easy to distinguish from representation staffs. Fifty the whole color establishment of movie clothing gives help to expressing the at-mosphere of movie. Color is one of the most powerful means that the person in charge of clothing may express the character of movie. He should ex-press the feature of a wearer with the colors of each clothing through showing the lack of taste of characters or hinting the resistant character with the clothing color which is not suitable for situation or the conservative character with suppressed color etc. Thus he (or she) should express the clothing color which is suitable for being able to express each character by analyzing the work whole through script and grasping the character of each character so as to establish the clothing which is suitable for individual character.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.42-48
• /
• 2012

Due to increase in demand of stable and long pipelines in natural gas industry, wide range of researches are being performed on automation welding to improved welding quality with respect to weld process parameters in real time measurement. In particular, the coupling between the pipe manufacturing process and location of the weld seam, the measured size of the gap that exists in the weld position and the weld angle depending on whether the movement of molten weld. This is due to absence of controlling welding penetration position, depending on the required size of the angle of the setting. In addition, the optimum welding conditions must be considered while selecting, the correlation between these variables and the systematic correlation has not yet been identified. Therefore, in most welded pipe root-pass weld solely depends on the experience of workers in relation to secure a stable weld quality. In this study, automation welding system is implemented to select a suitable root-pass STT (Surface Tension Transfer) welding method using the optimal welding conditions. To successfully accomplish this objective, there were various welding conditions used for welding experiment to confirm that the assessment required for construction through the pipe and automatic welding process is proposed to optimize this plan.

• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.309-315
• /
• 2020

Slaughterhouse wastewater (SWW) is characterized as one of the most harmful agriculture and food industrial wastewaters due to its high organic content. The emissions of SWW would cause eutrophication of surface water and pollution of groundwater. This study developed a pilot scale anaerobic-aerobic slaughterhouse wastewater treatment process (AASWWTP) to enhance the chemical oxygen demand (COD) and total nitrogen (TN) removal. The optimum supernatant reflux position and ratio for TN removal were investigated through the modified Box-Behnken design (BBD) experiments. Results showed that COD could be effectively reduced over the whole modified BBD study and the removal efficiency was all higher than 98%. The optimum reflux position and ratio were suggested to be 2 alure and 100%, respectively, where effluent TN concentration was satisfied with the forthcoming Chinese discharge standard of 25 mg/L. Anaerobic digestion and ammonia oxidation were considered as the main approaches for COD and TN removal in the AASWWTP. The results of inorganic nutrients (K⁺, Na⁺, Ca²⁺ and Mg²⁺) indicated that the SWW was suitable for biological treatment and the correspondingly processes such as AASWWTP should be widely researched and popularized. Therefore, AASWWTP is a promising technology for SWW treatment but more research is needed to further improve the operating efficiency.

• 구강회복응용과학지
• /
• 제23권3호
• /
• pp.197-203
• /
• 2007

Statement of problem: It is very important to establish the suitable position for artificial maxillary anterior teeth and the orientation of occlusal plane in fabrication of the complete dentures. Incisive papilla has been considered the most useful anatomic landmark in the arranging of a maxillary anterior artificial teeth. Purpose: To determine correct position of upper anterior artificial teeth in complete denture patients, relationship of incisive papilla, intercanine line, occlusal plane were evaluated in Korean adults. Materials and Method: Maxillary casts were made in 60 Korean dentate subjects. Each cast was mounted in Hanau modular articulator using Hanau spring bow. Then, anatomic landmarks were determined in each cast. Distance from central incisor to incisive papilla, distance from incisive papilla to intercanine line and discrepancies between frankfurt plane and occlusal plane were measured and analysed. Results: 1. The mean distance between the posterior point of incisive papilla and the incisal edge of central incisor was 11.20 mm (in male 11.77 mm, in female 10.55 mm) and there was no significant difference in measured values between male and female 2. The mean distance between the posterior point of incisive papilla and intercanine line was 2.52 mm (Male 2.57 mm, Female 2.35 mm) and there were no significant differencies in measured values between male and female 3. The mean discripancy between the Frankfurt plane and the occlusal plane were 9. 75 degree (Male 9.81 degree, Female 9.55 degree), and there was no significant difference in measured values between left and right sides.

• 복식
• /
• 제60권10호
• /
• pp.88-99
• /
• 2010

The purpose of this study is to express visual and functional diversity through modifiable design, and to suggest a methodological model. With this view, this study was aimed to departmentalize the case of knitwear in modifiable design of clothes and propose the possibility of variable knit fashion through make the most of knit's characteristics. Four wearable physical clothes using the most of flexible knits' characteristics were made for this study based on the modifiable design on the expressive tendency and analysis of plasticity. The following results were obtained. First, as modifiable knit design can create effects of several dresses in visual aspect and functional aspect, so it has practicality and functionality. Because modifiable clothes required wearer's participation, this have amusement that give enjoyment and freshness to wearer. Second, in mode of wearing, flexibility of knit is suitable character to open & close and change of wearing position. In manipulation, a prearranged plan for line of clothes and good choice of subsidiary materials are important. Third, the characteristics of knits allow using and mixing with different pattern and materials on the two sides of the same cloths except for the some of the parts. Moreover, there is no unraveled thread on the part of knits margin against woven, so it has the broad applicable range for the changeable design. Finally, the form and function, a prearranged plan for modifiable design of clothes have all contributed in creating new structure and patterns in design.

• 복식문화연구
• /
• 제18권5호
• /
• pp.892-907
• /
• 2010

The purpose of this study was to compare torso pattern made by draping and flat pattern method in terms of the size of breast. The size of this study was classified as 75A and 75D according to the size of breast. Each torso pattern by the combination of the size and pattern method was compared and analyzed. In order to test the fit of the draping and flat pattern that was developed according to the size of breast, the outer appearance was evaluated. The results of the study were as follows: First, The most striking size difference was difference between the front and the back on bust line level, which decides on position of the side seam in comparison of size between draping and flat pattern of 75A and 75D. In the flat pattern, the difference between the front and the back in the size of breast was consistent regardless of a change in the size of breast. However, in the draping, the bigger breast led to the bigger difference between the front and the back on bustline level. Second, the flat pattern in 75D was evaluated to be the worst in 27 items among total 46 items for the evaluation of outer appearance in the draping and flat pattern of 75A and 75D. Third, regardless of size, the draping was evaluated to be more suitable in the areas related to neck, arm hole, and waist dart than the flat pattern. These results are suggesting that the draping is a method of reflecting characteristic of the body type more accurately than the flat pattern, and that the draping is a more suitable method than the flat pattern for the design of clothing pattern of the body type with big breast like 75D.