• 대한토목학회논문집
• /
• 제31권6D호
• /
• pp.771-778
• /
• 2011

근래 양산시와 부산시간의 활발한 이동량에 따라 최근 도시철도 1호선 양산선(노포~북정)의 예비타당성조사가 완료되어 타당성이 있는 것으로 결론되어 짐에 따라 도시철도 서비스가 취약한 웅상지역의 교통문제를 개선하고 광역도시간의 균형발전을 도모할 수 있도록 부울경을 연계하는 광역도시철도망 구축 필요성이 요구되고 있다. 또한 광역도시철도망 구축의 필요성을 강조하기 위해 대상지역 수단별 통행량과 해당지역 도로통행배정을 조사하였고, 노선대안별 수송수요를 예측하여 수단별 통행량과 통행배정 결과에 따라 개략적인 경제적 분석을 위해 설정된 노선대안별 건설비와 편익을 산정하였다. 본 과업의 3개의 대상 노선안 중 효율적인 노선으로 선정된 노선 1안의 건설에 필요한 총 사업비는 7,943.2억원으로 산출되었으며, 사업비중 순공사비가 가장 많은 비용을 차지하고 있으며 다음으로 예비비, 차량구입비, 부대비 순으로 나타났으며 단, 용지보상비는 계상되지 않았다. 특히 노선 1안은 건설시 경제성 분석결과 편익/비용비가(B/C)가 0.584, 순현재가치(NPV)가 -2,174.7억원, 내부수익율(IRR)이 0.604%로 분석되어 현 단계에서는 경제성이 다소 없는 것으로 나타났으나, 장기적으로 노선 3안인 월평~용당의 양산구간만을 건설시 편익/비용비가(B/C)가 0.737로 나타나고 있다. 따라서 도시철도 서비스가 취약한 웅상지역 주민의 편의를 도모하기 위해 부산 도시철도 기본계획 재정비시 기존 신정선을 연장하여 도시철도 관련 상위계획에 본 과업노선을 포함시켜 장래 노선 2안인 부산~양산~울산으로 이어지는 광역도시철도망 체계 구축이 반드시 필요할 것으로 판단되고 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.125-131
• /
• 2008

This research tries to analyze and investigate the effects of the noise reduction test for the sound-absorbing materials installed tentatively on Metro Line 5. Though the noise reduction effects of each sound-absorbing material showed that there was about $2{\sim}5\;dB$ compared with before and after of the tentative installation, it shows that the noise reduction effects are reducing because of the section change condition such as dust absorption and the rail abrasion as time passes after the tentative installation. Also, many difficulties are occurring in the maintenance of the orbit facilities because of the installation of sound-absorbing materials. Though various abroad products for noise reduction are imported like this, the researches for the noise reduction effect increase for this and the improvement direction are being required because of the poor circumstance of the efficiency aspect compared to the economic investment effect because those are not suited to the character of domestic Metro.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.1247-1252
• /
• 2006

This Report explains a plan for the application and construction about BOM(Bill Of Material) in charge of primary part of the RIMS(Rolling-Stock Information Maintenance System) maximizing the RIMS's reliability. The BOM system of the Seoul Metro is accomplished the frequent changes of the structure and design through the OEM(Original Equipment Manufacturer) and the maintaining and repairing work and also The BOM system is constructed so that Seoul Metro can solve all problems of the composition change, Rolling-Stock construction, changeful history management. In addition the BOM system of the Seoul Metro is considered the applicative side of the technical data, information of the material, expediency and hindrance analysis.

• International Journal of Railway
• /
• 제4권3호
• /
• pp.64-69
• /
• 2011

Paris has one of the world's oldest metropolitan railway systems and was also a pioneer when it introduced the RER in the 70s. With planning objectives comparable to the GTX, the RER aimed at serving outer suburbs while fully crossing the city center at higher speeds than the Metro. Maybe more relevant is the comparison between the planned Grand Paris Express and GTX projects, in terms of their planning ambitions and their development framework. This article will introduce the main planning ideas behind the Metro and the RER in Paris, and try to draw relevant comparisons with the GTX plan. It will also present the plans and financing framework for the Grand Paris Express and compare it with the BTO scheme contemplated for GTX, and draw some recommendations for successful implementation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.407-416
• /
• 2008

The OCC of Seoul Metro whose operation began in 1974 is in charge of conveying 4,000,000 passengers across 117 subway stations in travel zones of 134.9Km in length. It continues to strive to ensure passenger safety by applying state-of-the-art-technology to each control system without delay. The power control center especially designed to provide power system operations for all stations of Seoul Metro(Line 1 to 4) and the rolling stocks implements preventive safety systems with the real time power system operational information on changes in conditions from the field through the power SCADA system(41 substations, 117 stations, 137 terminal units). This paper reports the differences of each line's power SCADA system(power SCADA systems of Seoul Metro(Line 1 to 4)), the roles and functions of the system, and the system operating characteristics and limits from the standpoint of the operator.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1416-1425
• /
• 2008

Urban railway carries large numbers of passengers during the rush hour. According to the announcement of Ministry of Land Transport and Maritime Affairs(MLTM), 221% of the congestion rate is reported in the SeoulMetro No.2 outer circle line from sadang to bangbea between eight and nine o'clock in the morning. This study analyzes the cause of the client's dissatisfaction about SeoulMetro such as the train delay, and decides the preference rank of the alternatives for congestion alleviation and enhancement of the transport capacity using Analytic Hierarchy Process(AHP).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.135-141
• /
• 2002

Recently, in the metro railways, researches on the skip-stop operation and development of the double deck train-set are active, which is to improve the service quality through reducing the passenger travel time and suppling seating service. Constructing new line or reforming the existent line needs huge amount of budget. Therefore, previous to start these large scale projects, scrutiny on benefit improvement, cost reduction and those optimal trade-off is indispensable. In this paper, a quantitative analysis to determine the optimal train service patterns and train-sets necessary is proposed, under the skip-stop operation condition in the metro railways. The analysis models are formulated in mathematical programming model, and tested validity using the LINGO 7.0.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.362-367
• /
• 2010

This paper deals with the correlation between the interior noise and the floor vibration of the train from rolling, impulse and friction in Busan Metro line 3. The correlation is verified by sound and vibration measurement causing friction between the railway and the wheel. If ANC(Active Noise Control) system can reduce 5 dB in below 500 Hz, the sound pressure level of the whole band pass can be reduced about 1.8-4.8 dB in squeal noise. Curve squeal noise is the intense high frequency tonal that can occur when a railway vehicle transverses a curve. The frequency range is from around 500 to almost 20,000 Hz, with noise levels up to about 15 dB in curve.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1699-1706
• /
• 2011

This study analyzed the level of service on passenger transfer between metro and bus based on transit smart card data obtained in 2010. In order to evaluate the level of service on transfer, we defined the service level specially on transfer time at metro stations. The data of passenger transfer time were used in cluster analysis to classify the service level from A to F. The results show that the average transfer time from metro to bus was 6.45 minutes. The number of stations with level of service A(approximately less than 7 minutes) and B(less than 16minutes) were found to be 215 and 227stations respectively. Also, the number of stations with the level of service C and D (greater than 20 minutes for transfer) were found to be 6 stations where any type of improvement on transfer facilities is required.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1788-1794
• /
• 2011

The mold transformer is a complex and critical component of DC substations in Metro system. In this paper, a cost effective and intelligent condition monitoring system for mold transformers in DC substations was developed. This paper also provides an overview of the management program using PD (partial discharge) data on mold transformers. Prior to application of the proposed system to Metro DC substations, experiments were performed at the metro line substation located in Seoul and presented case studies for the use of the intelligent condition monitoring system for mold transformer in DC substations. The experiment results indicated that the developing system can be need in helping mange the risk of unexpected failure of mold type transformers.