• Korean Journal of Environmental Agriculture
• /
• v.27 no.1
• /
• pp.1-9
• /
• 2008

The main purpose of this study is to accumulate the fundamental data representing groundwater of plastic film houses by means of water quality and its multivariate statistical analysis. Groundwater samples were collected in every two years since 2000 to 2004 from total 211 sites. According to the result of water quality analysis, ground water quality was suitable for irrigation purpose averagely. Correlation analysis showed that EC was highest positively correlated with $Mg^{2+}$ to 0.810(p<0.01), 0.776(p<0.01) in April and July, respectively. $NO_3-N$ was highest positively correlated with T-N to 0.794(p<0.01) in October. This result shows that it can lead to a different result even in similar case sometimes. Four factors were extracted through factor analysis in April and July, but five factors were extracted in October. The proportions of cumulative variance by the factor were 64.9, 60.2, and 70.7 in April, July, and October, respectively. The first factor was highly related to anions and cations such as $Ca^{2+},\;Mg^{2+},\;Cl^-,\;{SO_4}^{2-}$, and EC in contrast to that of stream water. According to the cluster analysis, 211 sites are classified into four groups. Common type of ground water quality was shown in group A. The pH and $PO_4-P$ were highest in Group B. The anions and cations were highest in Group C. $COD_{Cr}$ was highest in Group D.

• Journal of Forest and Environmental Science
• /
• v.33 no.3
• /
• pp.226-232
• /
• 2017

Dhup (Canarium resiniferum) is an economically and aesthetically important rare native tree species of Bangladesh. In natural condition 78.5-98.7% seeds do not germinate due to inhibition by hard seed coat, seed predation and unfavorable environmental conditions. A study was conducted in the Seed Research Laboratory and nursery of Institute of Forestry and Environmental Sciences, Chittagong University, Bangladesh in 2013 to find out appropriate pre-sowing treatments for maximizing germination and initial seedling growth. Eleven pre-sowing treatments were provided in both the seeds sown in polybags and seeds sown in propagator house. Results revealed that, germination started at first (after 20 days of seed sown) in seeds immersed in water at room temperature for 24 hours and germination completed within 38 days. Significantly higher (p<0.05) germination percentage (33%), germination energy (16.7%), plant percent (33%) and germination value (0.4) was found with seeds immersed in water at room temperature for 24 hours. Seedling height measured at three, four and five months after the seed germination in case of seeds treated by immersion in water for 24 hours was also greater than others. Therefore, pre-sowing treatment by immersion in water at room temperature for 24 hours was more effective in germination and production of quality vigor seedlings of Dhup.

• Korean Journal of Poultry Science
• /
• v.49 no.4
• /
• pp.189-197
• /
• 2022

This study was conducted to compare the egg productivity, egg quality, and blood characteristics of laying hens with different laying rates, and the frequency and cumulative duration of the sitting behavior observed before laying was investigated. Twelve 45-week-old Hy-Line Brown laying hens were randomly assigned to two treatment groups with three replicates. Treatment groups were classified as layers laying over 80%(high egg performance layers; HEP) and layers laying below 50%(poor egg performance layers; PEP). The experiment lasted 4 weeks. HEP showed higher hen-house egg production ratio and egg mass and lower feed conversion ratio(FCR) (P<0.05) compared with PEP, although egg weight was higher in PEP (P<0.05). In terms of egg quality, PEP showed differences in eggshell quality (eggshell color, eggshell thickness, and eggshell weight) (P<0.05). Additionally, HEP showed high triglycerides(TG), and PEP showed high alanine transaminase(ALT) level (P<0.05) in serum collected in the morning. In the afternoon, the HEP showed higher lactate dehydrogenase(LDH) levels (P<0.05). No differences in the Ca: P ratio were observed between layers with different laying rates. One hour before egg laying, HEP exhibited sitting behavior 4 times on average, each lasting 25 minutes. In conclusion, egg production and quality differ between HEP and PEP, and HEP showed frequent sitting behavior before egg laying. However, additional research is necessary to explore approaches other than specific behavioral observation to distinguish poor layers in the flock for application in farms.

• Survey Research
• /
• v.5 no.2
• /
• pp.31-48
• /
• 2004

We collected and analyzed 18 social surveys to assess the quality of samples with respect to region, gender, age-band, education level and occupation. We found in our samples that highly educated people and house wives are over-represented whereas low educated people, self-employed/blue collars and white collars are under-represented. To correct such sample distortions, we applied the iterative proportional weighting or the raking to our samples. We observed sizable changes in survey results. Also, the effective sample sizes were shrunken up to 20%-40%, that could be interpreted as the necessity of larger samples to meet the claimed sampling error limits.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.276-280
• /
• 2012

This study was conducted to determine the ideal beginning date of plastic house optimum heating for off-season (December) production of asparagus. To achieve this, the 1.6-year-old 'Green tower' asparagus was cultivated in Jeju area ($33^{\circ}$28.110N, $126^{\circ}$31.076E) and the yield and quality among 7 different beginning dates of heating from Oct. 25 to Jan. 20 with 15-days interval were compared. The heating was controlled to maintain the inside temperature was higher than $20^{\circ}C$, But the plastic house was ventilated when the inside temperature rose to $30^{\circ}C$. Days to sprouting took longer as heating dates were delayed. Days to sprouting took 52 days in heating at December 30, and the days were shortened thereafter. As the beginning of heating was delayed, sprouting of asparagus was retarded. Among treatments, days to sprouting was 52 days and longest when the heating began on December 30. When the heating began on October 25, harvest was earliest and started on 7 November. When the heating began on November 15 and 30, harvest started on November 30 and December 18, respectively. Harvesting started on November 7 for October 25 heating, November 30 for Nov. 15 heating, and December 18 for November 30 heating, respectively. When the heating began was done after December. 15, harvesting was possible after early January. The number of spear, spear weight and yield were highly increased in the treatments of heating after January. 10 when the asparagus dormancy was broken. In the case of heating dates were before the asparagus dormancy breaking, the total yield was highest in November 15 heating with 607 kg/10a. The marketable yield of November 15 heating was 386kg/10a, which was twice higher than the 193 kg/10a of October 25 heating. Accordingly, it is recommended to start heating on November 15 for the production of off-season (December) asparagus in Jeju. Therefore, the optimum heating date to start was November 15 for the improvement of quality and yield of off-season (December) asparagus in Jeju area.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.2
• /
• pp.248-251
• /
• 1983

The effects of shading - 90, 70, 50, 30, 10% on curing burley tobacco was investigated in pipe vinyl houses. The curing in sunlight under transparent materials resulted in an increase in temperature and a decrease in relative humidity. But amount of light on tobacco leaves were less than 10% sun light in all treatments. Shading was delayed curing period, but cured leaves under transparent shading materials were off color and brittle. Filling power and combustibility were deteriorated as decreased shading. But quality of cured leaves were non significant between treatments. Effects of shading were believed that resulted in a decrease in temperature and an increase in relative humidity than light.

• The Journal of Korean society of community based occupational therapy
• /
• v.4 no.1
• /
• pp.85-92
• /
• 2014

Objective : In this study, we tried to know what kind of exercise was more effective in sleep disorder by comparing melatonin in blood after applying low, median, with high intensity exercise in sleep disorder. Methods : We divided 90 into 3 groups and performed low, moderate, and high intensity exercise, respectively for 8 weeks in K city. Results : As a result, first, there was a significant change of global PSQI score in moderate intensity exercise comparing with before and after exercise. Second, there was a significant change of global PSQI score in moderate intensity exercise comparing with low and high intensity exercise. Third, there was a significant change of melatonin in blood in moderate intensity exercise comparing with before and after exercise. Forth, there was a significant change of melatonin in blood in moderate intensity exercise comparing with low and high intensity exercise. Conclusion : In this study, we observed change of EEG and melatonin in blood to know how did continued exercise according to intensity of exercise have effect on sleep disorder. In conclusion, it was more effect to apply moderate exercise. It can help progress of life of quality through improvement of sleep disorder and they stay healthy during the rest of time.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.79-79
• /
• 2018

용과(Hylocereus undatus)는 멕시코 및 과태말라가 원산지이며 아열대 및 열대지역에서 재배되고 있으며 아시아는 베트남 타이완 중국 일본 등 국가에서 재배하고 있다. 가지에 열매가 있는 모습이 용이 여의주를 물고 있는 형과 닮았다하여 붙여진 이름이다. 지구온난화로 인한 기온상승으로 전남지역 재배에 적합한 대체 열대 및 아열대과수 개발이 필요하다. 용과는 열대과수 중 비교적 낮은 온도($10^{\circ}C$이상) 조건에서 재배 가능하여 남부지역에서 시설내 가온재배하고 있다. 국내 시설재배 중 문제점은 용과는 밤에 꽃을 피기 때문에 밤에 활동하는 매개곤충이 없어서 인공수분으로 수분문제를 해결해야한다. 인공수분의 한계시간과 수분할 경우 과실비대에 미치는 영향을 알아보고자 인공수분 시간을 개화 1시간 이내, 4~5시, 11~12시 및 무 처리(방임)로 처리하였다. 개화시기는 1차 7월 13일, 2차 8월 8일, 3차 8월 26일로 3회에 걸쳐 개화가 이루어졌으며 이시기의 화분량는 4~5시가 0.68g, 11~12시 0.47g로 1시간 이내 0.16g보다 많았고 과실비대에서 1과중은 개화11~12시가 421g, 4~5시 400g, 1시간 이내가 377g으로 처리 간에 차이는 없었지만 무처리는 185g으로 처리구와 192~236g의 유의차가 있었다. 용과의 인공수분한계시간은 다음날 아침 7시(개화 11~12시)까지 인공수분 할 경우 정상적인 착과가 이루어졌으며 과실비대를 위해서 인공수분은 필수적으로 실시해야 한다.

• Journal of Home Health Care Nursing
• /
• v.9 no.1
• /
• pp.14-26
• /
• 2002

The purpose of the study was to compare both the nursing care satisfaction and the image of nurses as experienced by home health care clients and hospitalized clients. For the descriptive survey study. data were collected from 69 home heath care clients and 342 in-patients in a university hospital. The tools used for the study were modified by Quality Patient Care Scale(Wandelt & Ager. 1974) and Image of Nurses (송인자, 1993). The data were analyzed using Pearson Correlation. Scheffe test. factor analysis. t-test. and ANOVA. The major findings were as follows: Regarding nursing care satisfaction, the mean score of total nursing care satisfaction in home health care clients was 3.28 out of 4.0. Among five domains, the domain with the highest score was the psychosocial domain, followed by the general. the professional. the physical. and the communication domain. The level of nursing care satisfaction was not significantly different according to demographic variables except for age: the age group of 41-60 showed the highest score (p<0.05). The mean score of total nursing care satisfaction in hospitalized clients was 2.95 out of 4.0. Among five domains, the domain with the highest score was the psychosocial domain, followed by the physical and the communication. the professional. and the general domain. The level of nursing care satisfaction was not significantly different according to demographic variables except age: the higher the age the higher the score (p<0.05). The levels of nursing care satisfaction in all five domains were significantly higher in home health care clients than in hospitalized clients(p=0.0005). Regarding image of nurses, the mean score of total image of nurses in home health care clients was 3.32 out of 4.0. Among four domains, the domain with the highest score was the sincerity domain, followed by the kindness. the spirit. and the knowledge and skill domain. The level of image of nurses was not significantly different according to demographic variables. The mean score of total image of nurses in hospitalized clients was 3.05 out of 4.0. Among four domains. the domain with the highest score was the sincerity domain, followed by the kindness, the knowledge and skill, and the spirit domain. The level of image of nurses was not significantly different according to demographic variables. The levels of image of nurses in all four domains were significantly higher in home health care clients than in hospitalized clients (p=0.001). Both the levels of nursing care satisfaction and image of nurses, part of an evaluation for quality of nursing care were significantly higher in home health care clients than in hospitalized clients. In light of the findings, we could consider that home health care nurses provided client-centered comprehensive nursing care. However, nurses need to have methods that more promote the social recognition of the image of nurses and nursing care services as well as professional knowledge and skills.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.