• Title/Summary/Keyword: The hip

Search Result 3,211, Processing Time 0.037 seconds

Kinematic Analysis of Airborne Movement of Dismount from High Bar(I) (철봉 내리기 공중 동작의 운동학적 분석(I))

  • Choi, Ji-Young;Kim, Youg-Ee;Jin, Young-Wan
    • Korean Journal of Applied Biomechanics
    • /
    • v.12 no.2
    • /
    • pp.159-177
    • /
    • 2002
  • The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle and the angular velocity of the air born phase and understand the control mechanism of the high-bar movement, the somersault, the double somersault, the double somersault with full twist. For this study seven well trained university gymnastic volunteered, Zatsiorky and Seluyanov(1983, 1985)'s sixteen segment system anatomical model was used for this study. For the movement analysis three dimensional cinematographical method(Arial Performance Analysis System : APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVIEW 5.1 graphical profromming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and angular velocity were defined. As a result of this study 1. As the rotation of the body increased in the air born phase the projection angle of the CM of the total increased, this resulted the increased of the max hight of the CM. 2. In three dimensional angular velocity the Z axis(vertical direction) projection angular velocity increased as the rotation of the body increased in the airborn phase, but the Y axis and the X axis projection angular velocity did not show significant differences. 3. As the rotation of the body increased in the air born phase the angular movement of the shoulder and the hip showed significant change. These movement act as the starter in the preparation phase. 4. The somersault angle, the twist angle, the tilt angle of the upper body related to the global reference frame in the releas phase the average somersault angle of the three types of high-bar movement was $57.7^{\circ}$, $38.8^{\circ}$, $39.7^{\circ}$, the average tilt angle was $-1.5^{\circ}$, $-5.4^{\circ}$, $-8.4^{\circ}$, the average twist angle was $13.4^{\circ}$, $10.6^{\circ}$, $23.3^{\circ}$. This result showed that the somersault with full twist had the largest movement.

The Subjective Estimation on the Ensemble and Comfort of Workers Wearing winter Uniform in Taegu (대구지역 동계 제복 근무자의 피복 착의 앙상블과 쾌적성의 주관적 평가)

  • Ryu, Duck-Hwan;Lee, Uk-Ja;Kim, Seong-Jin;Song, Min-Kyu;Cho, Ji-Hyun;Jung, Meung-Sun
    • Fashion & Textile Research Journal
    • /
    • v.2 no.3
    • /
    • pp.253-264
    • /
    • 2000
  • The purpose of this study was to examine the thermal comfort characteristics of the garments for school, textile and bank worker's uniform. The garments selected for this study were frequently used in Taegu area in terms of design and material used for making garments by the survey for the study The human subject tests were performed to determine the thermal comfort characteristics of garments including thermal, humidity, and wearing sensation and the data were analysed statistically. The results of the study were as follows: 1. According to the result of the survey jacket was mostly used as a school uniform for both male and female high school students. The survey showed that 93% of male students wore 'neck T-shirts' and dimensional fitness for the school uniform got suitable at 2~3 grade high school students. In terms of human subject tests, most students rated 'uncomfortable' in wearing sensation of their school uniform. One of this reason was due to the humidity sensation and air velocity sensation. Level of significance of the thermal sensation for gender difference was higher in hands and feet of the subjects than in chest and thigh of them. 2. According to the result of the survey jacket with zipper was mostly used as a textile worker's uniform. The result of the survey indicated that some textile workers are wearing their inner wear (38.7% for upper and 46.6% for lower). In the human subject tests, about 50% of subjects rated 'comfortable to slightly comfortable' for wearing sensation of the textile worker's uniform. It showed that the female subjects of the humidity sensation was rated higher than the male subjects of the humidity sensation, while the male subjects of the thermal sensation was rated higher than the female subjects of the thermal sensation. There was a closer correlation with the subjective thermal sensation for textile worker's uniform in center parts of the subjects such as back and waist than exposed parts. 3. The result of the survey showed that 70% and 23% of the female banker uniform were blouse and jacket, respectively and 75% and 25% of the male banker uniform were jacket and T-shirt, respectively. All interviewee rated trousers and skirts that were used for their lower. 4. The result indicated that 50% male and 67.7% female subjects for the banker uniform rated 'slightly comfortable for the comfort' sensation. 50% male subjects rated 'neutral' and about 50% female subjects rated 'slightly warm to neutral' for the thermal sensation. In addition, The result showed that 75% male subjects for both upper and lower rated 'neutral' for the humidity sensation and also 75% female subjects rated 'neutral to slightly dry'. Thus, there was no significant different between gender. 5. In the thermal sensation of the subjects for the banker's uniform by parts, 50% subjects rated 'neutral' for their body parts, including head, neck, back, waist, hip, lower arm, and thigh. The extremely cold parts were hands and feet for both male and female subjects.

  • PDF

A Study on the Kaftan Style in Asia (아시아 Kaftan양식에 관한 연구)

  • 오춘자
    • Journal of the Korean Society of Costume
    • /
    • v.35
    • /
    • pp.45-66
    • /
    • 1997
  • This thesis is a study on the kaftan styles iin Asia. The purpose of he study was to examine the origin o the kaftan concentrating on the history and cultural backgrounds of nomads in he Western Central and North Eastern Asia. Secondly for more thorough study and expla-nation on how these kaftans contributed to East-West trade along the silk road. wall paintings and miniature illuminations along Oasis roads persia and Saracen period were compared, Also real kaftans were compared and analyzed the characteristics of Western (Turkey palestine) Central(Kazakistan Uz-bekistan Tadzhistan Qyrgyztan Turkmenistan) and the North Eastern Asian(Mongol) area. Thirdly an attempt has been made to provide the North Eastern Asian(Mongol) area. Thirdly an attempt has been made to provide the style classifications according to their peculiarities of the various kaftans as well as how kaftan gave important influences on custumes of different religious sects. The kaftan is a long coat-like garment with front openings fastened with long sash having an extra long sleeves which were worn by middle and high class nomadics throughout the West Central and North Eastern Asia This type of kaftans were a basic clothing for nomadics since they were constantly moving fromone to another areas on their horse back riding. They also wore tight trousers with boots. Kaftans seem to be originated from nomads of Steppe around B.C. 800 On B. C 400 west asian areas such as Solokha Kul-oba Kulogan had pictures sculptues on vases showing kaftans of half coat type length with front opening tied with band. Also the materials used were the products of animals such as wool or felt with animal designs showing Scythian nomads. In the North Eastern Asia Hsiung-Nu were active in Kazakha North Altai and Mongol The Clothing and fabrics exfavated near Noin-ula Pazyrik showed many samples of kaftan with trousers with other interment be-longings with a corpse around B.C 300 to A. D 100 when trades along the silk roads were proven by many historians Kaftans excavated in this area wore red front opening silk materials which suggesting settling down of nomads. in he central Asia Dol-gull near Altai mountain area were mainly miners who later had many trades with Persia and Bizantine. After Dol-gull Bezeklik temple Samarkant Kizil cow Budda sculture wall paintings of Astana tomb showed typical kaftan of this re-gion. These were both hip covered length as well as long coat with narrow sleeves. Es-pecially they had different color band fron the main kaftan with grogeously and splendously designed silk. In perusia during A. D 1400 to 1600 minia-ture illumination showed kaftan as a high class symbol more than clothing purpose. They had best quality silk with extra long sleeves draping and had a layers of kaftans one on top of anther as a symbol of wealth These Kaftans with different colors and designs were even more beautiful with their effective combinations and contrast of colors. On the other hand the lower class common people and servants wore simple kaftan with the front part of the kaftan were slipped into the belt in order to be more active and con-venient to work, The real kaftans discovered at Topkapi Saray palace of Turkey from A. D 1300 to 1900 were also compared. These kaftans were very numerous in numbers as well as designs The materials and designs used were also vari-ous such as Chinese to Italian silk. The shaped and pattern itself were not much different from the previous nomad's Kaftans. The Palestian kaftans remained were from the beginning of 19th and 20th century. Since this area is hot and dry desert they used black and navy blue colors mostly in order to exclude the sun lights. The patterns used were similar to Nomads and Bedouin with cross stiches and patch work decorations. In the central Asia they had similar life style and natural environmental cnditions with Turkish tribe which resulted in similar kaftan styles as nomads. Mongols conserved basic patterns of kaftan since Cinggis Khan with deep folding in order to keep warm. At last the kaftans studided in this thesis were classified in to four such as half coat long coat jacket and vest style. A pattern used in the Central Asia were zigzag and ani-mal design whereas in the West Asia were floral plant arabesk and circle pattern. As I discussed previously kaftan styles of nomads in the Asia maintained its basic pat-tern throughout the history except slight changes in color gusset sleeve shapes. These slight changes were made according to the need to adapt the need of environmental natu-ral conditions, The reason for aboriginality of kaftan in Asia was its simplicity and con-venience Most interesting fact is that for all these years Mongols are still wearing kaftan in their life ensuring us that they art the preserves of old kaftan. Since this thesis dealt enormous Asian regions I had a limitation of not being able to cover the Far Esatern asian areas such as Korea China and Japan how these kaftans were influenced in their clothing history as well as Eastern and Western culture. This topic along with the studies on materials and designs of patterns of kaftan will be another research project in the future.

  • PDF

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • Proceedings of the Korean Powder Metallurgy Institute Conference
    • /
    • 2000.04a
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

The Clinical Usefulness Measurement of the Whole Body Percent Fat Calculated by the Part Bone Mineral Density Measurement (부분골밀도 측정을 통해 산출되는 체지방률의 임상적 유용성에 대한 평가)

  • Kang, Young-Eun;Kim, Eun-Hye;Kim, Ho-Sung;Choi, Jong-Sook;Choi, Woo-Jun
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.15 no.1
    • /
    • pp.3-9
    • /
    • 2011
  • Purpose: Generally dual energy X-ray absorptiometry has been used for the purpose of evaluation of osteoporosis and treatment. Recently the interest of obesity came to be high and body percent fat test is increasing. Existing measure of body fat have to scan the whole body can be evaluated, but only lumbar spine and hip measurements was assumed to be whole body fat as well as improving the software. It tries to check whether the part measured value not being whole body measurement has the validity or not compared with the value calculated with the method that it is different, it forgives through a correlation with a (BIA) and (BMI). Materials and Methods: In 2010, the body percent fat was measured among the examinee coming to the Asan Medical Center public health care center from March till August against 90 females more than 40 years old through (DXA) and BIA. BMI utilized the value which wrote an hight and weight measured through the body measuring instrument in the examinee information and is automatically calculated. In addition, it classified as the low weight ($13-18.5kg/m^2$), normal ($18.5-25kg/m^2$), and corpulence ($25-30kg/m^2$) based on BMI and so that it could check whether there was the difference according to the weight or not BMI and BIA and correlation between DXA were analyzed in each group. The statistical program for the analysis used SPSS 12.0. Results: The comparison of DXA at 3 which it divides into the low weight and normal and corpulence groups and BIA did not show the difference noted statistically in all groups and the between group comparison was exposed to do not have a meaning. The body percent fat measured by the correlation analysis result DXA at the state that it doesn't divide into the group showed the high correlation (r=0.908, p0.01) noted statistically compared with BMI and showed the high correlation noted statistically in a comparison with BIA (r=0.927, p0.01). Conclusion: It confirmed that the whole body percent fat presumed from the part bone density measurement showed the excel correlation compared with BIA and BMI and information is high. There is still no clear standard about the presumed whole body percent fat and it is difficult to evaluate the fat evaluation by the bone mineral density measurement. However, it is determined that the information offering which is more objective through the comparative study with the body percent fat which is very efficient and in that it can obtain till the information about a fat as well as diagnosis of the osteoporosis through the bone density checkup is measured by the afterward telegraph bone density checkup and is clinically useful is possible.

  • PDF

A Study on Correlation among Length Changes of Body Surface Total lines and Segment Lines -Changed Amount Caused by the Lower Limb Movements- (체표(體表)길이 변화(變化)의 상관성(相關性) 연구(硏究) - 다리(下肢) 동작(動作)에 따른 변화량(變化量)을 중심(中心)으로 -)

  • Cho, Sung Hee
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.17 no.4
    • /
    • pp.622-637
    • /
    • 1993
  • The Purposes of this study were to investigate the significant correlation among the length changes of body surface total lines and between the length changes of body surface total lines and those of component body surface segment lines, and to reveal anticipated relation among body surface length changes by the lower limb movement including all movement direction of hip joint, knee joint & ankle joint for the more functional clothing making & designing. 10 Crosswise & 5 lengthwise body surface total lines and 48 crosswise & 39 lengthwise body surface segment lines of 26 female college students aged from 18 to 24 years were measured directly on the body surface and analyzed by ANOYA & Multiple Comparison Test(Tukey), and the length changes of them were calculated as the difference of the mean length at Fl movement from the mean length at each movement and were analyzed by PEARSON CORRELATION. The results were as following : 1. Correlation among the length changes of body surface total lines (1) Correlation among the length changes of body surface total lines significantly changed by the movement ; 1) The more GA5 expanded, the more GA6 & GA7 each expanded, and the more GA18 expanded, the more GA1 & GA3 each expanded. 2) The more GA15 expanded, the less GA14 each contracted. 3) The more GA7 expanded, the larger GA17 contracted. 4) The more GA1 & GA18 expanded, the larger GA16 contracted, and the larger GM contracted, the less GA16 contracted. (2) Only GA7 and GA17(at F4) showed high (over r=0.7) correlation coefficient, But others' correlation coefficients were r=0.4~0.7. (3) Correlation coefficients among & between girth items and length items 1) Correlation coefficients among girth items were shown + ; between GA3 and GA4, GA5, GA8, between GA5 and GA6, GA7, GA9 each, between GA1 and GA6 and between GA4 and GA7. 2) Correlation coefficients among length items were shown + or - ; shown + between GA14 and GA15 and between GA17 and GA16 ; but Shown - Between GAlS and GA16. 3) Correlation coefficients between girth items and length items were mainly shown - : shown-between GA1 and GA16, GA17, between, GA4 and GA16, between GA6, GA7 each and GA17, between GA8 and GA18 ; but shown + between GA1, GA3 each and GA18 and between GA8 and GA14 were shown +. 2. Correlation between the length changes of body surface total lines and those of component body surface segment lines. (1) All correlation coefficients were + except A147 of GA14. (2) Correlation coefficient over r=0.7 was shown ; between GA3 and CB3, A35 each, between GA5 and A054, between GA6 and A63, between GA7 and A72, A74 each, between GA8 and A83, A84 each, between GA15 and A153, between GA16 and Al64, Al65 each, between GA18 and A189 : but was not shown between GA4, GA17 and it's component body surface segment lines each. (3) Characteristics of correlation between the length changes of body surface total lines and those of body surface segment lines ; 1) If significant correlation of body surface total lines were expansion parts, it's component body surface segment lines was also expansion segment and the otherwise were the same. But exception was shown between expansion line GA3 and A031 (at F4), between GA18 and AlS9 (at F6) and between GA14 and A147, so to speak GA3 & lines and GA14 was contraction total line oppositely A147 was expansion. 2) The more GA3, GAlS expanded, the less A031, A189 contracted. 3) The more GA14 contracted, the more A147 expanded. 4) All correlation except the above 2), 3), the more total lines (GA1, GA3, GA5, GA15, GA16, GA18) expanded, the more segment lines (A15, CB1, A31, A34, CB3, A52, A54, A153, A169, A181) expanded, or the larger total lines (GA14, GA16, GA17) contracted, the larger segment lines (A141, A142, A161, A164, A165, A172) contracted.

  • PDF

A Study on the Blood Health Status and Nutrient Intake in Elderly Women Dwelling in Longevity Region in Jeonla Province according to Bone Mineral Density (전라도 장수지역에 거주하는 여자노인의 골밀도에 따른 생화학적 지표 및 영양섭취상태에 관한 연구)

  • Oh, Se In;Kwak, Chung Shil;Lee, Mee Sook
    • The Korean Journal of Food And Nutrition
    • /
    • v.28 no.2
    • /
    • pp.228-240
    • /
    • 2015
  • This study was conducted to investigate the dietary and other factors affecting bone mineral density (BMD) in older Korean women. A total of 340 women aged 65 to 74 were recruited from the Kugoksoondam area (Kurye, Goksung, Soonchang and Damyang counties), known as the longevity-belt region in Jeonla province, Korea. They were categorized into two groups according to bone status by T-score : a nonosteoporotic group and an osteoporotic group. Demographic characteristics were collected, as well as information on physical measurements, blood tests for biochemical indicators, health status health-related life style, dietary behavior, favorite food groups, nutrient intake and mini nutrition assessment (MNA). The results are as follows: The mean age of 185 nonosteoporotic women was 69.6 years and that of 155 osteoporotic women was 70.9 years (p<0.001). The mean T-score of the nonosteoporotic group was $-1.5mg/cm^3$ and that of theosteoporotic group was $-3.2mg/cm^3$ (p<0.001). Height and body weight in the nonosteoporotic group were significantly higher than in the osteoporotic group (p<0.001, respectively). There was no significant difference in BMI, although the BMI in the nonosteoporotic group was slightly higher. Waist and hip circumferences in the nonosteoporotic group were significantly higher than in the osteoporotic group (p<0.01, respectively), and the mid upper arm and calf circumferences were also significantly higher than in the osteoporotic group (p<0.001, p<0.01, respectively). The 5 m walking ability was significantly superior compared to the osteoporotic group. Serum levels did not show any significant differences between the groups and were within normal range. The serum total protein, albumin and Insulin-like growth factor (IGFs) levels of the nonosteoporotic group were significantly higher than those of the osteoporotic group (p<0.05, p<0.05, p<0.001, respectively). IGF was 104.7 ng/mL for the nonosteoporotic group and 88.1 ng/mL for the osteoporotic group. Physical activity and appetite in the nonosteoporotic group were significantly higher (p<0.01, p<0.05, respectively). The favorite food groups of the nonosteoporotic group comprised more meats and fish than those of the osteoporotic group (p<0.05, respectively). Nutrient intake was not significantly different, with the exception of niacin intake (p<0.05), but the nutrient intake of the nonosteoporotic group was slightly higher than that of the osteoporotic group. The niacin intake of the nonosteoporotic group and the osteoporotic group were 11.4 mgNE and 10.0 mgNE, corresponding to 103.6% and 90.9% of the Korean EAR, respectively. The MNA score of the nonosteoporotic group was significantly more favorable than for the osteoporotic group. In conclusion, it is necessary to maintain adequate body weight and muscle mass. Habitual physical activity may have a beneficial effect on BMD for older women. Dietary factors, such as meat and fish, higher intake of niacin rich foods and nutrient status for older women also appear to have favorable effects on bone mineral density.

THERMAL ANALYSIS OF THE DUAL CURED RESIN CEMENTS ACCORDING TO CURING CONDITION (중합조건에 따른 dual cured resin cement의 열분석적 연구)

  • Lee, In-Bog;Chung, Kwan-Hee;Um, Chung-Moon
    • Restorative Dentistry and Endodontics
    • /
    • v.24 no.2
    • /
    • pp.265-285
    • /
    • 1999
  • The purposes of this investigation were to observe the reaction kinetics of five commercial dual cured resin cements (Bistite, Dual, Scotchbond, Duolink and Duo) when cured under varying thicknesses of porcelain inlays by chemical or light activation and to evaluate the effect of the porcelain disc on the rate of polymerization of dual cured resin cement during light exposure by using thermal analysis. Thermogravimetric analysis(TGA) was used to evaluate the weight change as a function of temperature during a thermal program from $25{\sim}800^{\circ}C$ at rate of $10^{\circ}C$/min and to measure inorganic filler weight %. Differential scanning calorimetry(DSC) was used to evaluate the heat of cure(${\Delta}H$), maximum rate of heat output and peak heat flow time in dual cured resin cement systems when the polymerization reaction occured by chemical cure only or by light exposure through 0mm, 1mm, 2mm and 4mm thickness of porcelain discs. In 4mm thickness of porcelain disc, the exposure time was varied from 40s to 60s to investigate the effect of the exposure time on polymerization reaction. To investigate the effect on the setting of dual cured resin cements of absorption of polymerizing light by porcelain materials used as inlays and onlays, the change of the intensity of the light attenuated by 1mm, 2mm and 4mm thickness of porcelain discs was measured using curing radiometer. The results were as follows 1. The heat of cure of resin cements was 34~60J/gm and significant differences were observed between brands (P<0.001). Inverse relationship was present between the heat of reaction and filler weight % the heat of cure decreased with increasing filler content (R=-0.967). The heat of reaction by light cure was greater than by chemical cure in Bistite, Scotchbond and Duolink(P<0.05), but there was no statistically significant difference in Dual and Duo(P>0.05). 2. The polymerization rate of chemical cure and light cure of five commercially available dual cured resin cements was found to vary greatly with brand. Setting time based on peak heat flow time was shortest in Duo during chemical cure, and shortest in Dual during light cure. Cure speed by light exposure was 5~20 times faster than by chemical cure in dual cured resin cements. The dual cured resin cements differed markedly in the ratio of light and chemical activated catalysts. 3. The peak heat flow time increased by 1.51, 1.87, and 3.24 times as light cure was done through 1mm, 2mm and 4mm thick porcelain discs. Exposure times recommended by the manufacturers were insufficient to compensate for the attenuation of light by the 4mm thick porcelain disc. 4. A strong inverse relationship was observed between peak heat flow and peak time in chemical cure(R=0.951), and a strong positive correlations hip was observed between peak heat flow and the heat of cure in light cure(R=0.928). There was no correlationship present between filler weight % or heat of cure and peak time. 5. The thermal decomposition of resin cements occured primarily between $300^{\circ}C$ and $480^{\circ}C$ with maximum decomposition rates at $335^{\circ}C$ and $440^{\circ}C$.

  • PDF

The Association of Central Obesity with Type 2 Diabetes among Koreans according to the Serum Gamma-Glutamyltransferase Level: Korean Genome and Epidemiology Study (혈청 Gamma-Glutamyltransferase에 따른 복부비만과 제2형 당뇨병간의 관련성: Korean Genome and Epidemiology Study)

  • Shin, Ji-Yeon;Hwang, Jun-Hyun;Jeong, Jin-Young;Kim, Sung-Hi;Moon, Jai-Dong;Roh, Sang-Chul;Kim, Young-Wook;Kim, Yang-Ho;Leem, Jong-Han;Ju, Young-Su;Hong, Young-Seoub;Ha, Eun-Hee;Lee, Yong-Hwan;Lee, Duk-Hee;Kim, Dong-Hyun
    • Journal of Preventive Medicine and Public Health
    • /
    • v.42 no.6
    • /
    • pp.386-391
    • /
    • 2009
  • Objectives : This cross-sectional study was performed to examine if the serum gamma-glutamyltransferase (GGT) level that is within its normal range is associated with the risk of type 2 diabetes and if the association between the waist hip ratio (WHR) and type 2 diabetes is different depending on the serum GGT levels. Methods : The study subjects were 23,436 persons aged 40 years or older and who participated in regular health check-ups at 11 hospitals (males: 5,821, females: 17,615). The gender-specific quintiles of the serum GGT and WHR were used to examine the associations with type 2 diabetes. Results : The serum GGT levels within their normal range were positively associated with type 2 diabetes only in women. The adjusted odds ratios (ORs) were 1.0, 1.0, 1.4, 2.1, and 2.5 according to the quintiles of the serum GGT ($p_{trend}$<0.01). The WHR was more strongly associated with the prevalence of diabetes among the women with a high-normal serum GGT level as compared with those with a low-normal serum GGT level (p for interaction=0.02). For example, the adjusted ORs for women with a low normal serum GGT level were 1.0, 1.2, 1.5, 2.2, and 2.4 according to the quintiles of the WHR, while those figures were 1.0, 2.4, 3.6, 5.0, and 8.3 among the women with a high normal serum GGT level. However, in men, the serum GGT was very weakly associated with type 2 diabetes and the association between the WHR and type 2 diabetes was not different depending on the serum GGT level. Conclusions : Serum GGT within its normal range was positively associated with type 2 diabetes, and central obesity was more strongly associated with the prevalence of type 2 diabetes when the serum GGT level was highnormal. However, these associations were observed only in women, which is different from the previous findings. The stronger relation between central obesity and type 2 diabetes among women with a high-normal serum GGT level can be useful for selecting a group that is at high risk for type 2 diabetes irregardless of whatever the underlying mechanism is.

A Study on the Variation of Daily Urban Water Demand Based on the Weather Condition (기후조건에 의한 상수도 일일 급수량의 변화에 관한 연구)

  • Lee, Gyeong-Hun;Mun, Byeong-Seok;Eom, Dong-Jo
    • Water for future
    • /
    • v.28 no.6
    • /
    • pp.147-158
    • /
    • 1995
  • The purpose of this study is to establish a method of estimating the daily urban water demand using statistical model. This method will be used for the development of the efficient management and operation of the water supply facilities. The data used were the daily urban water use, the population, the year lapse and the weather conditions such as temperature, precipitation, relative humidity, etc. Kwangju city was selected for the case study area. The raw data used in this study were rearranged either by month or by season for the purpose of analysis, and the statistical analysis was applied to the data to obtain the regression model. As a result, the multiple linear regression model was developed to estimate the daily urban water use based on the seather condition. The regression constant and the model coefficients were determined for each month of a year. The accuracy of the model was within 3% of average error and within 10% of maximum error. The developed model was found to be useful to the practical operation and management of the water supply facilities.

  • PDF