• 한국소음진동공학회논문집
• /
• 제15권4호
• /
• pp.404-411
• /
• 2005

To increase accurateness and reliability of the evaluation of power tool vibration transmitted to an operator, it is necessary to measure the grip and feed forces during the measurement of hand-transmitted vibration. In the study a system was invented to measure the vibration and the grip and/or feed force, which consists of a measurement handle and a PC with a data acquisition system and the corresponding software. Strain gauges and an accelerometer were mounted on the handle surface for the simultaneous measurement of the forces and the vibration. The program in the system makes it possible to monitor the grip and feed force during the tool operation so that the operator keeps the applying forces within the pre-determined range. Investigating the vibration total values, frequency-weighted root-mean-square accelerations at the handle, obtained in repetition for each power tool with control of the grip and feed force showed more consistency than those measured without force control. By using the system the experimenter can reduce random error of the measured vibration.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.689-694
• /
• 2004

To increase accurateness and reliability of the evaluation of power tool vibration transmitted to an operator, it is necessary to measure grip and feed forces during the measurement of hand-transmitted vibration. In the study a system was invented to measure the vibration and the grip and/or feed force, which consists of a measurement handle and a PC with data acquisition system and the software. Strain gauges and an accelerometer were mounted on the handle for the simultaneous measurement of the forces and the vibration. The program in the system makes it possible to monitor the grip and feed force during the tool operation so that the operator keeps the applying forces within the pre-determined range. Investigating the vibration total values, frequency-weighted root mean square accelerations at the handle, obtained at various conditions with control of the grip and feed force showed more consistency than those measured without force control. By using the system the experimenter can reduce uncertainty of the measured vibration.

• 한국안전학회지
• /
• 제31권1호
• /
• pp.81-86
• /
• 2016

The WMSDs are known to occur more in upper extremity than lower extremity, and such a ratio is increasing each year. The motions or repeated work requiring excessive strength beyond worker's maximum grip strength were known as a major cause of the WMSDs in upper extremity. To prevent the WMSDs in upper extremity, research on the grip strength characteristics analysis of field workers that can be used as basic data for work design and manual tool design is needed. The purpose of this study is to identify various variables affecting grip strength and is to find out the impacts of grip strength on WMSDs. This research measured the grip strength of 327 field workers at Heavy Industries, and also conducted a questionnaire survey on individual characteristics and job characteristics. As a result of analyzing grip strength, the grip strength was statistically significant (P<0.1) according to the body surface area (BSA) of the research subjects. The differences between percentile groups of grip strength were statistically significant (P<0.1) according to pain levels of hand/wrist/finger and arm/elbow. The comparison results between the average grip strength of Korean adult males and the average grip strength of the survey-targeted heavy industry workers show that the average grip strength of the heavy industry workers was higher by 9.75 kg. This study analyzed relationship between grip strength and the pain levels of hand/wrist/finger and arm/elbow, and compared the findings in this study with those of existing preceding studies. Also, this research comparatively analyzed the grip strength of Korean adult males and survey-targeted heavy industry workers. The findings of this study can be used as useful data for ergonomic work design and manual tool design to prevent WMSDs at industrial worksites, given that almost no data on the grip strength of workers in the industrial sites are found in Korea.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1038-1042
• /
• 2003

In order to evaluate dynamic impedance of a hand-arm system it is necessary to measure the hand-transmitted vibration and the reaction force at the same time while gripping the vibrating handle. In the study a device was developed to measure both the vibration and the force. The device consists of a measurement handle with four strain gauge and two accelerometers and a PC based control system with a program for the signal processing and evaluation of the hand-transmitted vibration and reaction force. The handle was installed on the vibration shaker so that it can move by the generated signal from the control system. As an application of the system dynamic reaction force and the frequency weighted acceleration at the handle attached to the shaker were measured at various grip force and feed force. This system will be very useful in the area of impedance measurement and the evaluation of performance of anti-vibration gloves.

• Journal of Preventive Medicine and Public Health
• /
• 제27권4호
• /
• pp.763-776
• /
• 1994

Recent studies reveal that grip forces during the hand-arm vibration are most significant for the genesis of vibration-induced white linger syndrome. Therefore, exerted grip forces and skin temperatures of fingers were regarded as dependent variables in experiments and the effects of grip temperature, noise, pushing force, vibration and the combined effect of vibration and pushing force were studied. The objectives of the present study were, first, to varify and compare the changes of grip force affected by grip temperature, noise, pushing force, vibration and the combined effect of vibration and pushing force and, second, to observe the reaction of finger skin temperature affected by above factors. Forty-six healthy male students ($25.07{\pm}2.85$) participated in five systematically permuted trials, which endured 4 minutes each other. Experiments were executed in a special chamber with an air temperature of 21C. In each experiments, the subjects were exposed to five experiment types: (1) grip force of 25N only, (2) pushing force of 50N, (3) acceleration of vibration $7.1m/sec^2(z-direction)$, (4) pink noise of 95 dB (A) and (5) combination of pushing force 50N and acceleration of vibration $7.1m/sec^2$. A repeated-measures analysis of variance (ANOVA) was performed on the grip force to test whether it was affected by noise, pushing force, vibration and pushing force. The present results show that vibration was significantly related to the increase of grip force, but the other factors, such as pushing force, noise and grip temperature had no signigicant influence on the increase of grip force, and that the reaction of finger skin temperature were significantly affected by the skin temperature at start of experiment and grip temperature, not grip force and other experimental conditions. Therefore, we suggest that the management for decreasing the grip force is meaningful to prevent the occurrence of Hand-arm vibration syndrome (HAVS).

• 제어로봇시스템학회논문지
• /
• 제19권12호
• /
• pp.1138-1144
• /
• 2013

This paper proposes a tactile transfer and display method between a data glove and vibration motors module. The data glove is developed to capture the hand postures and to measure the grip forces. The measured data are simplified with the proposed 5-bit transfer and display algorithm, and the vibration motors module is developed to display the measured hand posture and grip force to the operator. The proposed 5-bit algorithm contains both an 8-step hand posture and 4-step grip force level information for tactile transfer to the vibration motors module. Also, the effectiveness of the proposed method is shown through several experiments.

• 대한인간공학회지
• /
• 제24권4호
• /
• pp.15-21
• /
• 2005

Use of a glove made of materials with a low elasticity decreases the performance of the hand such as agility, dexterity, range of motion, and grip strength. The present study examined if the adverse effects of a low-elastic glove can be reduced by a design which accommodates the changes of hand surface lengths by hand motion. Two glove designs which provide patches of elastic cloth and pleats at the finger joints and knuckle were developed by considering the hand surface length changes, and then compared with two conditions(bare hand and conventional glove design that does not consider the dynamic characteristics of the hand dimensions) in terms of completion time in peg board insertion task, maximum grip strength, discomfort in hand motion, discomfort in force exertion, and overall discomfort by 24 right-handed participants. The test results confirmed that wearing of a glove significantly reduced the agility and grip strength capability of the hand and indicated that the novel designs were effective to lessen the performance decreases compared to the conventional design. Also, of the glove designs, the pleat glove design was found most preferred for both better hand performance and less subjective discomfort.

• 근관절건강학회지
• /
• 제9권1호
• /
• pp.18-27
• /
• 2002

Introduction : Exercise has been suggested as an important nursing strategy in which to help elderly maintain functional performance and to enhanced quality of life. Most of exercise study has been reported on fitness exercise such as walking, swimming, dance etc for health of elderly. There have been few reports about exercise on the promotion of small and fine movement of elderly. The purpose of this pilot study was to determine an effect of 6 weeks hand and finger exercise in home to improve hand muscle strength such as grip strength and finger pinch pressure. Materials and Methods Design: This pilot study was used one group pre and post-test design. Sample: Twelve elderly women above 60 years of age or older living in community were selected by convenient sampling. Procedure: Signed informed consent was obtained prior to participate in this study. The authors met elderly and taught hand and finger exercise, daily a week for 6 weeks, within 30 minutes per session. But exercise frequency and strength were not same. Instruments: Left and right grip strength were measured by Bulb Dynamometer(made in USA) and left and right pinch pressure were measured by Baseline Hydraulic Pinch Gauge(made in USA). Data analysis: Discriptive data analyses were performed on all variables. Wilcoxon matched-pairs Signed-Ranks test were used to find difference of grip strength and pinch pressure between pre and post exercise using SPSS 10.0 for Window. Results: Samples age ranged from 60 to 73, Mean age was 65.3. All were women. Ten elderly were diagnosed osteoarthritis and one had DM. After six weeks hand and finger exercise, Left and right grip strength were higher than those of before exercise(Z=-2.667, P<0.01 ; Z=-3.065, p<0.01). And left pinch pressure after hand and linger exercise were higher than that of before pinch pressure (Z=-2.315, p<0.05). But Right pinch pressure was not shown significant change(Z=-1.099, p>0.05). Conclusions: Although this study was limited by the sample size and design, the findings provide some important implications for community based exercise nursing intervention. Short term (six weeks) exercise of hand and linger is shown to be useful as nursing intervention to maintain routine daily activities such as eating, writing, grip something for elderly.

• 한국전문물리치료학회지
• /
• 제14권3호
• /
• pp.72-80
• /
• 2007

The purpose of this study was to verify the effects on fine motor, muscle strength (hand-grip), explosive muscular strength (vertical jump) and muscular endurance (sit-up) after ingesting coffee. Hence this study targeted a sample group of 38 healthy men in their twenties, without cardiac disorders and muscle disorders and none of them were hypersensitive to caffeine with symptoms such as palpitation and dyspnea. Nineteen of them ingested coffee, whereas the other nineteen men ingested decaffeinated coffee at the same amount. The amount of coffee was controlled by weight so as to regulate intake to 6 mg caffeine per kg. Research material was evaluated through O'Conner's finger dexterity test, hand-grip strength test, vertical jump test and sit-up test. The data were analyzed by means of paired t-test and ANCOVA. The material was then, analyzed by means of two-way ANOVA in order to verify the effect of one or two cups of coffee on fine motor and hand-grip strength. All parameters were measured by an independent observer. The results were as follows: There were no significant differences to fine motor, hand-grip strength, vertical jump, sit-up before and after drinking decaffeinated coffee, but there was a difference to those before and after drinking caffeine coffee. There was no significant difference to hand dexterity and hand-grip strength in one or two cups of coffee. Intake of a certain dosage of caffeine effects activation of muscles working in a short period based on the results. As a consequence, intake of certain dosages of caffeine was beneficial to enhance efficiency of activity during exercises, but it is will be difficult to obtain the desired result with only one or two cups of coffee.

• The Journal of Korean Physical Therapy
• /
• 제23권6호
• /
• pp.43-47
• /
• 2011

Purpose: The aim of this preliminary study was to use hand function tests to Hand dexterity levels provided by the type of compression garment and compression bandages in asymptomatic subjects and to collect baseline data for the comparison of hand functions in the patients with chronic arm lymphedema. Methods: The subjects of this study were 32 healthy volunteer female with a mean age of 45.8 years. Grip strength and hand functions were tested in three conditions-no compression, compression garment, and compression bandages-using the nine-hole peg test (NHPT), the box and block test (B&BT), Minnesota Manual Dexterity test (MMDT), and the hand-held Jamar dynamometer. Results: The grip strength was significantly low in the bandage condition (p<0.05). The performance in both compression groups (i.e., bandage and compression garment) decreased as the thickness of the compression material increased (p<0.05). Conclusion: The findings of this study suggest that grip strength and hand function scores are influenced by the characteristics of the compression applied. Future study is needed to determine the level of hand function between patients with chronic arm lymphedema and healthy individuals.