• Journal of Plant Biology
• /
• 제31권4호
• /
• pp.289-298
• /
• 1988

The pattern of elongation in the developing hypocotyl of Glycine max shows that the elongation generally proceeds from base to the cotyledonary node in acropetal diredtion, although earlier elongation takes place through the entire hypocotyl. Because the differentiation of the vascular cambium in the hypocotyl advances also acropetally, it can be seen that the acropetal wave of hypocotyl elongation is associated with the acropetal differentiation of the cambium in the hypocotyl elongation is associated with the acropetal differentiation of the cambium in the hypocotyl elongation is associated with the acropetal differentiation of the cambium in the hypocotyl. The elongation of procambial cells occurs not only during active elongation but also after cessation of elongation of the hypocotyl. In tangential view, the procambium of the hypocotyl in early stage has homogeneous structure composed of short cells. Subsequently, these procambial cells elongate actively and then become elongated long cells. These long cells eventually become fusiform initials, while some of elongated long cells are transversely divided and then converted into ray initials. The characteristics of the vascular cambium are entirely acquired some time after hypocotyl elongation is completed, and the transitin from procambium to vascular cambium in the hypocotyl is a rather gradual process.

• 동력기계공학회지
• /
• 제13권3호
• /
• pp.40-46
• /
• 2009

This study on the bolt elongation and torque measuring method by ultrasonic nod-destructive method. In the past, The dial gage was used for the elongation measurement of gas turbine bolts. The purpose of this study is to improve the traditional bolt elongation measurement method. The old method using dial gage measures the elongation of the gas turbine bolt. If the length differences among the loading bolts are within the required range, The loading torques of bolts consider as acceptable. But this method can not give the information about torque differences among the loading bolts. It could bring out vibration of turbine due to loading torque differences among the bolts. So the elongation and torque must be measured simultaneously. The new technology using ultrasonic non-destructive method can give the information about bolt elongation and torque. The ultrasonic method basically measures the speed in the bolt material for the calculation the bolt elongation. But the ultrasonic speed varies according to temperature and loading torque of bolts. So the factors of temperature and loading power were investigated and reflected to the calculation of bolt elongation and torque. The results of this study shows the big difference among the bolts torque in the old method and the torque differences among the bolts can be adjusted by reflecting the result of this study. And this torque adjusting method can decrease gas turbine vibration problem due to torque difference among the bolts. So this paper shows ultrasonic method is better than old method for the measurement of bolt elongation and torque.

• 한국작물학회지
• /
• 제45권1호
• /
• pp.50-54
• /
• 2000

The elongation of mesocotyl and coleoptile plays important roles in the seedling emergence and stand establishment of dry direct-seeded rice. Experiments were carried out to elucidate the effects of seed-presoaking treatments of GA$_3$ and some inorganic salts on the mesocotyl, and coleoptile elongation of rice. Seed-soaked GA$_3$ promoted the elongation of mesocotyl, but little effect on the coleoptile elongation. The stimulation effects of GA$_3$ were found to be enhanced by addition of CaCl$_2$ However, the sole treatment of CaCl$_2$ showed no stimulating effect on the mesocotyl and coleoptile elongation. Mesocotyl elongation was most prominent in the combined treatments of 50ppm GA$_3$ with 100 mM CaCl$_2$. The synergistic effects of GA$_3$ and CaCl$_2$ on mesocotyl elongation varied with varietal groups. The stimulating effects of GA$_3$ were enhanced significantly by the addition of CaCl$_2$ in japonica varieties, Dongjinbyeo, Ilpumbyeo and Milyang 95, and tall indica variety, Labelle, but not in semidwarf Tongil type varieties, Tongilbyeo, Milyang 23, and Nampungbyeo, and semi-dwarf indica, Short Labelle. The promoting effects of GA$_3$ on the mesocotyl elongation were decreased in proportion to the lowered osmotic potential by PEG 6000 on the contrary to CaCl$_2$ This implies that the synergistic effects of CaCl$_2$ with GA$_3$ on mesocotyl elongation was not caused by osmotic potential lowered by CaCl$_2$ addition but by the salt itself. Salts such as Ca(NO$_3$)$_2$, MgCl$_2$ BaCl$_2$, NaCl, KCl and KNO$_3$ showed the synergistic effects with GA$_3$ on mesocotyl elongation as well. The degree of synergistic effects showed no differences among salts tested, implying that there is no specificity of ions constituting the salts.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.321-328
• /
• 2003

The elongation of contact length on the line of action is considered with particular reference for roll forming of gears, and for dynamic behavior of the tooth in meshing. However there is no paper that discuss the elongation of contact length in the load meshing of gears. Based on our investigation, the contact length on the line of action elongates more than the kinematically calculated value. In rolling, as the tool approaches the workpiece, the center distance of the gears decreases by a small amount. But, the elongation of contact length is sensitive. Therefore, the contact point on the line of action is difficult to be determined, which complicates the tooth analysis. In this study, the exact relation between the elongation of contact length and the tooth space over the recess or before the approach are revealed by experiments and kinematic theory. This analytical result applies not only for rolling, but also for the single flank meshing which is done under constant center distance.

• Fibers and Polymers
• /
• 제2권1호
• /
• pp.144-147
• /
• 2001

The HVI properites and Mantis single fiber tensile properties were analyzed to evaluate the relationship between fiber and bundle tensile properties. For this study, a new method has been developed for estimating the modulus and toughness of cotton fiber bundles directly from the HVI tenacity-elongation curves. The single fiber tensile properties were shown to be translated well into the bundle tensile properties. The single fiber breaking elongation was found to be the most significant contributing factor to bundle tensile properties. The bundle breaking elongation and toughness were shown to increase as the single fiber breaking elongation increased. The bundle modulus increased as the single fiber breaking elongation and/or standard deviation of single fiber breaking elongation decreased.

• Journal of Plant Biology
• /
• 제27권2호
• /
• pp.43-50
• /
• 1984

Effects of IAA on the elongation and cell wall hlysocidase activities were investigated in excised rape (Brassica napus L. cv. Yongdang) hypocotyl segments. IAA promoted the elongation of rape hypocotyl segments. In rape hypocotyls, the first 10-mm segments from the hook exhibited maximal elongation and the capacity of elongation was gradually decreased with increasing distance of each 10-mm from the hook. A good correlation has been obtained between the magnitude of endogenous growth and the activities of $\alpha$, $\beta$-glucosidase and $\alpha$, $\beta$-galactosidase. However, exogenous application of IAA did not seem to enhance the tissue with IAA resulted in acidification of the incubation medium. From these data, we can conclude that IAA seems to enhance elongation of the tissue segments, at least in part, by releasing hydrogen ion into cell wall, some of which may participate in the cell wall extension process, but does not seem to trigger the activation of $\alpha$, $\beta$-glucosidase and $\alpha$, $\beta$-galactosidase.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 춘계학술대회 논문집
• /
• pp.55-58
• /
• 1993

In this paper, the relationship between trap properties and the molecular orientation owing to elongation was investigation from TSC, electrical conductivity and X-ray diffraction was investgated. The changes of the stretching direction, from an a-axis orientation(at low elongation) to a c-axis orientation(at high elongation), as the elongation increases. were determined from X-my diffraction patterns. These results suggest that the tendency for a decrease in the trap density at a higher elongation is consistent with a continuous change of the reorientation from the a-axis to the c-axis as the elongation increases.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1209-1211
• /
• 1993

In this paper, the relationship between electrical breakdown properties and the molecular orientation owing to elongation was investigation from electrical conductivity, electrical breakdown strength and X-ray diffraction wag investigated. The changes of the stretching direction, from an a-axis orientation(at high elongation) to a c-axis orientation(at high elongation), as the elongation increases, were determined from X-ray diffraction patterns. These results suggest that the tendency for a decrease in the trap density at a higher elongation is consistent with a continuous change of the reorientation from the a-axis to the c-axis as the elongation increases.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.223-226
• /
• 1998

In this paper, we have investigated how morphology and electrical properties in Polyphenylene sulfide(PPS) are changed by uniaxial elongation. XRD pattern shows that interplanar distance and crystallinities are decreased by increasing elongation ratio. Electrical conduction mechanism of PPS is explained as schottky emission from analysis of electrical current. The electrical current is decreased by increasing elongation ratio. The conductivity is changed remarkably above the glass transition temperature around $(82^{\circ}C)$. The band gap of PPS is evaluated as 3.9-4(eV) from the results of photoconductivity. Increarnent of elongation ratio gives us some information about deep trap formation from photocurrent.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.169-172
• /
• 2008

휨항복 이후 주기하중을 받는 철근콘크리트 부재(보와 전단벽)에서는 길이방향의 인장변형이 누적된다. 이러한 길이방향 인장변형은 철근 콘크리트 부재의 강도 및 변형능력을 저하시킬 수 있다. 본 연구에서는 비선형 트러스 모델해석을 통하여 철근콘크리트 부재에 발생되는 길이방향 인장변형의 메커니즘을 분석하였다. 그 결과, 길이방향 인장변형은 소성힌지의 길이방향 철근에 발생되는 잔류인장소성변형으로 인하여 발생되고, 대각 콘크리트 스트럿의 전단력 전달 메커니즘이 길이방향 인장변형의 크기에 중요한 영향을 미치는 것으로 나타났다. 이러한 분석결과를 토대로 주기거동 동안 철근콘크리트 부재에 누적되는 길이방향 인장변형을 평가할 수 있는 간단한 평가식을 제안하고, 다양한 재하이력을 갖는 보 실험결과와 비교되었다.