• 한국농공학회논문집
• /
• 제55권5호
• /
• pp.49-58
• /
• 2013

Appropriate random variables and probability density functions based on statistical analysis should be defined to execute reliability analysis. Most studies have focused on only normal distributions or assumed that the variables showing non-normal characteristics follow the normal distributions. In this study, the reliability problem with non-normal probability distribution was dealt with using the convolution method in the case that the integration domains of variables are limited to a finite range. The results were compared with the traditional method (linear transformation of normal distribution) and Monte Carlo simulation method to verify that the application was in good agreement with the characteristics of probability density functions with peak shapes. However it was observed that the reproducibility was slightly reduced down in the tail parts of density function.

• 한국콘텐츠학회논문지
• /
• 제21권4호
• /
• pp.434-446
• /
• 2021

최근 들어, 산업뿐만이 아니라 사회 전반적으로 큰 영향을 미칠 것으로 예상되는 4차 산업 혁명에 대한 관심이 커지고 있다. 하지만 4차 산업의 공간적 분포와 관련한 연구는 제한적이었다. 이에 본 연구는 비지리적 방법인 LQ와 지리적 방법인 Getis-Ord's Gi^*를 이용하여 4차 산업의 공간적 분포를 유형화하고 집적지를 도출하였다. 분석결과를 종합하면 다음과 같다. 첫째, 4차 산업의 "특화지역"은 수도권 지역의 비율이 높으나, 산업유형에 따라 비수도권 지역에서도 확인되었다. 둘째, 4차 산업의 "클러스터"와 "주변 지역"은 대부분 수도권에 군집하여 형성되어 있었다. 셋째, 수도권 지역 내에서도 4차 산업 "클러스터"는 과밀억제권역과 경기남부지역에 편중되어 나타났으며, 수도권 북부지역과 자연보전권역은 소외된 양상을 보였다. 본 논문은 4차 산업의 "클러스터" 지역이 수도권 지역에 집중되어 있으며 이러한 특징을 반영한 정책적 대안이 필요함을 보여주고 있다.

• 대한치과보철학회지
• /
• 제37권1호
• /
• pp.104-126
• /
• 1999

The purpose of this study was to compare and evaluate the stress distribution and displacement developed in the abutment teeth and residual ridge area by madibular unilateral distal extension removable partial denture with 2 different retainer designs. The retainers on right and left canine and right 2nd molar were Alters clasp in one model and telescopic crown in the other model. The stress distribution of abutment teeth and residual ridge area on two model were compared and analyzed with 3-dimensional finite element method. 150N and 400N forces were applied vertically, 30 degree and horizontally on the central fossa area of left 1st molar of the removable partial denture, and then stress distribution patterns were analyzed and compared. The results were as follows 1. As the magnitude and angulation of applied force were increased, the magnitude of stress on the right and central residual ridge area and the right canine of the telescopic type increased and comparing to those of the Alters clasp type. 2. As the magnitude and angulation of applied force were increased, the mesial direction of displacement on the right residual ridge area and the right tooth of the telescopic type increased and the distal direction of displacement on left residual ridge area and the left canine increased comparing to those of Akers clasp type. 3. As the vertical force was applied, the distal direction of the displacement of the right tooth were greater and that of the left canine was smaller and the upward displacement of the right canine was greater in telescopic partial denture than those of Akers clasp type. 4. As the 30 degree force was applied, the mesial direction of the displacement of the right tooth were greater and the distal direction of the displacement of the left canine was smaller and the upward displacement of the right canine was greater in telescopic partial denture than those of Akers clasp type. In the horizontal force the results were same in right area tooth but the distal direction of displacement was greater in left canine. 5. In both removable partial dentures, as the magnitude and degree of force were increased, the stress and displacement were increased. The compressive force was dominative than the ten sile force. 6. In both removable partial dentures, the magnitude of stress was greater on mucosal tissue area than that of the alveolar bone area on distal extension residual ridge area but the result was reversed on anterior residual ridge area. The displacement was always greater on mucosal tissue area than that of alveolar bone area.

• 대한치과보철학회지
• /
• 제34권1호
• /
• pp.31-69
• /
• 1996

The purpose of this investigation was to analyze stress distribution in implant supporting tissue according to different types of attachments such as combination bar attachment, Hader bar attachment, O-Ring attachment and Dal-Ro attachment that are used in mandibular overdenture by using two osseointegrated implants, to study the influence that POM IMC used in bar type attachment has in implant supporting tissue and compare the preceding analyses to find out an effective stress distribution method. Three dimensional photoelastic method was used to obtain the following results. (A) Analysis of stress distribution according to attachment type 1. Under vertical load condition, compressive stress was seen at implant supporting area of working side on all the photoelastic models but in Hader bar attachment tensional stress was seen at distal upper area of implant supporting area. Relatively Hader bar and O-Ring attachment showed even stress distribution pattern. 2. Under vertical load condition, compressive stress at implant apex area and tensional stress at implant lateral supporting area were seen at nonworking side of all models. 3. Under $25^{\circ}$ lateral load condition, general compressive stress was seen at working side implant supporting area in most of the models, especially at distal upper supporting area higher compressive stress concentration was seen in combination bar attachment and tensional stress concentration, in Hader bar attachment. 4. Under $25^{\circ}$ lateral load condition, compressive stress at implant apex area and tensional stress at implant lateral supporting area were seen at nonworking side of all models, except O-Ring model which showed compressive stress only. (B) Influence of POM IMC to stress distribution in bar type attachment 5. Under vertical load condition, better stress distribution pattern was seen at working side of combination bar and Hader bar attachment model using POM IMC. 6. Under vertical load condition, stress value was increased at nonworking side of combination bar attachment model using POM IMC and tendency of increasing compression was seen at nonworking side of Hader bar attachment model using POM IMC. 7. Under $25^{\circ}$ lateral load condition, better stress distribution pattern was seen at working side of combination bar attachment model using POM IMC but tendency of increasing stress was seen on working side of Hader bar attachment model using POM IMC. 8. Under $25^{\circ}$ lateral load condition, stress reduction was seen at nonworking side of combination bar attachment model using POM IMC but tendency of increasing stress was seen at nonworking side of Hader bar attachment model using POM IMC.

• 한국측량학회지
• /
• 제31권6_2호
• /
• pp.601-609
• /
• 2013

Standard lots, which are used to assess values of individual lots in Korea, have been criticized for their improper distribution. However, there has been very little evaluation for the spatial distribution of standard lots, and an evaluation method has never been developed. In order to overcome this situation, we attempt to assess the appropriateness of the spatial distribution of standard lots using the L-index and Monte Carlo simulation. The L-index is a well-known indicator of the complete spatial randomness (CSR) of points in spatial statistics. If the L-index of standard lots is similar to that of individual lots, the former is considered to be randomly distributed according to the latter. By analyzing L-indices of two study areas, Gangnam and Seongdong, we find a statistically significant difference in Gangnam area and a relatively small difference in Seongdong area. We confirm that the spatial distribution of standard lots is not CSR and that the L-index is useful as an evaluation method. These results suggest that the standard lot selection and management guidelines need to be modified to apply the spatial distribution of individual lots to the standard lot selection process.

• 환경영향평가
• /
• 제22권5호
• /
• pp.455-466
• /
• 2013

The aim of this study is to seek application plans of National Ecosystem Survey database based on comparison and examination of feasible analysis methods for distribution characteristics of alien plants. In order to set up a correlation analysis method between alien plants and environmental factors, we had reviewed the 3rd National Ecosystem Survey guide book and consequently, two kinds of analysis method were tested. One was 1/25,000 scale map boundary based analysis and the other was representative mountain area based analysis. In this study we restricted the research area to select reliable surveyed database from whole "2011 National Ecosystem Survey flora database" according to two major criteria. First, an area defined by 1/25,000 scale map boundary and representative mountain area where the number of surveyed flora records should be within top 20%. Second, land cover map should also be built up inside that area. As a result, 25 map boundaries and 25 representative mountain areas were extracted to be analyzed. To limit a boundary for every representative mountain area we had analyzed distribution of environmental factors around that area by manual inspection with SPOT-5 remote sensed satellite image then designated 3km buffer zone from each alien plant location in that area. After then, naturalized index (NI) and urbanized index (UI) was calculated and correlations analysis was carried out. With the result of correlation analysis by map boundary only agricultural land area showed significant value of r (0.4~0.6, correlated) and the rest of factors did not. In the case of representative mountain area, the result showed that agricultural land, road and forest area showed significant value of r (0.6~0.8, highly correlated) which was corresponding to existing researches. Therefore, representative mountain area based method is preferable when using the alien plants database of National Ecosystem Survey for species distribution analysis. And also, considering the way of database utilization is strongly suggested at the first stage of survey planning for promoting active use of national ecosystem survey database.

• 수산해양기술연구
• /
• 제59권3호
• /
• pp.242-252
• /
• 2023

In this study, we aimed to determine the seasonal distribution and biomass of fish in Samcheok marine ranching area (MRA) of Republic of Korea using the scientific echosounder. Fish trap and gillnets were used to identify fish species in the survey area, and dB-difference method was used to estimation the spatio-temporal distribution and density of fish. The results showed that the dominant species in Samcheok marine ranching area were Chelidonichthys spinosus, Sebastes inermis, Hexagrammos otakii and Tribolodon hakonensis. The spatio-temporal distribution of fish showed that fish had a relatively higher distribution at night than during the day. In addition, the density of fish by season was highest at night in July at 34.22 g/m² and lowest in April at 0.42 g/m².

• 산경연구논집
• /
• 제8권6호
• /
• pp.61-73
• /
• 2017

Purpose - Aviation control, navigation, and aircraft control in the air transportation area are very specialized. Each part is in progress for safety, efficiency, automation, and further. On the other hand co-work among each part including knowledge sharing has been inattentive for many reasons. The purpose of this research is to show how practicians and professionals in the air transportation area perceive the issue of knowledge sharing and to recall the necessity of knowledge sharing in the area. And we try to find ways to activate the knowledge sharing in the area. Research design, data, methodology - For the research, we inquired into whether practicians and professionals think knowledge sharing can effect safe aviation positively or not and what steps are necessary to activate knowledge sharing in the area. We adopted survey method using questionnaires for current practicians and interview for specialists. The survey and interview results were analyzed using regression analysis and AHP method. The interview for specialists and analyzing the results using AHP was to investigate what are the precedence factors to activate the knowledge sharing. Results - First, practicians perceive that knowledge sharing will affect aviation safe positively. Second objective knowledges such as, tower air traffic control procedure of aviation control area, flight principle and structure of aircraft control area, instrument landing system of navigation area, for knowledge sharing of each area were identified. Also the precedence factors such as, knowledge absorbability of personal factor, personal expectation of result of expectation factor, leadership of management of Structure factor, method of knowledge spread of application factor for knowledge sharing were found. Conclusions - Knowledge sharing for practicians and professionals in the aviation area is very important especially from the perspective of safety. However, for various many reasons including the environment of each special area that focusing on their own area, knowledge sharing has not been emphasized. We found that practicians in the area feel that knowledge sharing is necessary and helpful. For it, each practician's active participation is the most important and many ways such as chatting room to share knowledge are to be developed. And the organization culture should be changed to encourage knowledge sharing.

• 상하수도학회지
• /
• 제16권6호
• /
• pp.726-732
• /
• 2002

Pressure drop could happen in the water distribution systems due to pipe breaks or maintenance. The pressure drop causes the water service shutdown and nodal water demands should be reduced in some areas. The conventional analysis method of water distribution systems can not consider the change of nodal water demands caused by these pressure drops. This study is to investigate the variation of nodal water demands according to the nodal water pressure and its effect on the analysis of water distribution systems. For these purpose, one real water service district was selected as a study area. As a result, nodal water demand patterns according to the water pressure could be suggested. Also, we could confirm that the suggested new analysis method for the water distribution systems which considering water pressure drops could be more reliable than the conventional method.

• 한국초지조사료학회지
• /
• 제4권3호
• /
• pp.187-193
• /
• 1984

Meadow fescue품종(品種)을 공시(供試)하여 엽면적(葉面積)의 수직적분포(垂直的分布)와 건물수량(乾物收量)과의 관계(關係)를 검토(檢討)하였다. 1. 엽면적(葉面積)의 수직적분포(垂直的分布)로서 품종(品種)을 분류(分類)한 결과(結果), 최대엽면적(最大葉面積)이 하층부(下層部)에 분포(分布)되어 상층부(上層部)로 갈수록 엽량(葉量)이 적어지는 품종(品種)(M), 중간층(中間層)에 최대엽면적(最大葉面積)이 분포(分布)되어 상(上) 하층부(下層部)로 갈수록 엽량(葉量)이 감소(減少)되는 품종(品種)(Leto First, Bundy), 최대엽면적(最大葉面積)이 중간층(中間層)에 분포(分布)되어 있으나 상층부(上層部)에 엽량(葉量)이 대부분(大部分)이 집중분포(集中分布)된 품종(品種)(Tammisto) 및 하층부(下層部)에서 최대엽면적(最大葉面積)을 나타내나 전층(全層)에 엽량(葉量)이 비교적(比較的) 균등(均等)히 분포(分布)된 품종(品種)(Trader)의 4 가지 형(型)으로 분류(分類)되었다. 2. 유효엽면적지수는 건물수량(乾物收量), 엽면적지수(葉面積指數), 경중(莖重) 및 경면적지수(莖面積指數)와 유의(有意)한 정상관(正相關)을 나타 내었다. 3. 출수경(出穗莖)이 많은 품종(品種)의 유효엽면적은 상층부(上層部)에 분포(分布)되었으나 영양경(榮養莖)이 많은 품종(品種)은 유효엽면적지수의 비율(比率)이 높았다. 4. 최대엽면적(最大葉面積)을 나타내는 층(層) 이상(以上)에 분포(分布)된 엽면적(葉面積)과 엽면적중(葉面積重)의 관계(關係)는 M과 Trader가 유의(有意)한 부(負)의 상관(相關)이 인정(認定)되었으나 그 외의 품종(品種)에서는 유의(有意)한 상관(相關)이 인정(認定)되지 않았다.