• 동력기계공학회지
• /
• 제18권6호
• /
• pp.180-185
• /
• 2014

Due to the larger and high-speed vessels recently constructed, output and speed of the engines for propulsion or power generation is increasing. These high-power and high-speed engine of the ship is becoming as a major contributor causing excessive noise and vibration. Other fittings as well as equipment installed on board, it makes equipment failure or other defect by resonance. This causes a lot of M/H(Man Hour) for repairs and the reliability of the company is invading even be negative because the clients give much comment. Thus, it's being studied for any fittings installed on board to maintain the safe operation and to prevent any problem during the performance in any operating conditions. In this study, it was investigated to solve these problems for the supports of the various fittings for easy installation-related support that each type of intensity and shape and manufacturing method using structural analysis program(DNV Nauticus Hull 3D Beam). Namely, it would be applied to the very large crude carriers in consideration of mechanics of materials of the support equipment by providing the fact that dynamics analysis of the structural characteristics of the equipment and the support of the production installation is easy and productivity can be high standards for geometry and thereby to simplify the analysis task to design changes at the same time and to minimize the reinforcement for the supports.

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.69-77
• /
• 2023

Recently, carbon composites have been applied to various fields. However, carbon composites have not been applied to the fishing vessel field due to its structure standards centered on glass composites. In this study, a structural strength evaluation study was conducted for the application of carbon composites in the fishing vessel field. Hull minimum thickness verification test and hull joint verification test were conducted. Compared to glass composites, the verification was based on equivalent or better performance. The results show that carbon composites can reduce the weight by 20% compared to glass composites. For hull joints, it was necessary to increase the thickness of the joint seam by the thickness of the hull to apply carbon composite. Through this study, a standard for the application of carbon composites to fishing vessel can be established.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.365-374
• /
• 2001

Its a tendency to strengthen related international was as the importance on marine oil pollution recently becomes the issue. According to the regulation of IMO, oil discharge from ships is allowed under 15PPM only and oil filtering equipment is essential. Oily water separator of laminated plate type which is one of gravity type separator can be use as assistant equipment for the oil filtering system to meet the present IMO standard, because it fits well to process large amount of rich oil with high specific gravity. The purpose of this paper is to investigate an efficiency of oil/water separation with the characteristics of laminated plate arrangement. The analyse of oil contents for oil-water mixture were carried out in order to find an efficiency of oil/water separation and an experimental study was simultaneously carried out to investigate internal flow characteristics of separator by visualization method and PIV(Particle Image Velocimetry) measurement at three spaces of plates for 5, 10 and 15 mm with variation of inlet flow rates of $0.25m^3$/h and $0.5m^3$/h. The experimental results showed that the space of the plates acts a significant role in the separating process.

• 해양환경안전학회지
• /
• 제22권5호
• /
• pp.576-582
• /
• 2016

이산화탄소 배출량 제한을 의무화하는 EEDI, SEEMP 등의 국제협약에 대응하기 위하여 선박의 에너지 절감장치(ESD, Energy Saving Device) 관련 국내기술 대응이 절실하다. 본 연구는 국내 중소형 조선소의 주력선종 효율 향상의 ESD를 설계하기 위하여 유동특성 분석에 대한 연구이다. 프로펠러 상단으로 유입되는 유동을 개선하기 위하여 bare hull의 선미벌브 및 빌지 주변의 유동특성을 수치해석과 모형시험을 통하여 정성적으로 분석하였으며, 선저압력 지점의 개선 및 프로펠러 상단 유입의 선미 빌지 유동 제어를 위하여 선미벌브와 빌지 사이에 수직평판을 부착하였다. 선미 선체표면 압력회복으로 전저항이 약 3.04 % 감소하였으며, 프로펠러 상단 유동 제어를 통해 평균 공칭반류가 약 18.8 % 감소하였다.

• International Journal of Ocean System Engineering
• /
• 제3권1호
• /
• pp.33-37
• /
• 2013

Reinforced concrete structures have been increasingly widely used in numerous industrial fields. These structures are often exposed to severely corrosive environments such as seawater, contaminated water, acid rain, and the seashore. Thus, the corrosion problems that occur with the steel bars embedded in concrete are very important from the safety and economic points of view. In this study, the effects of the cover thickness on the corrosion properties of reinforced steel bars embedded in multiple mortar test specimens immersed in seawater for 5 years were investigated using electrochemical methods such as the corrosion potentials, polarization curves, cyclic voltammograms, galvanostat, and potentiostat. The corrosion potentials shifted in the noble direction, and the value of the AC impedance also exhibited a higher value with increasing cover thickness. Furthermore, the polarization resistance increased with increasing cover thickness, which means that the oxide film that is deposited on the surface of a steel bar surrounded by alkali environment exhibits better corrosion resistance because the water, chloride ions and dissolved oxygen have difficulty penerating to the surface of the steel bar with increasing cover thickness. Consequently, it is considered that the corrosion resistance of reinforced steel can be improved by increasing the cover thickness. However, the corrosion resistance values of a steel bar estimated by measuring the corrosion potential, impedance and polarization resistance were not in good agreement with its corrosion resistance obtained by polarization curves.

• 한국표면공학회지
• /
• 제50권4호
• /
• pp.259-265
• /
• 2017

5000 series aluminium alloys and austenitic stainless steels have excellent corrosion resistance and sufficient strength, which are widely used as materials for marine equipment and their parts in the marine environment. The corrosion characteristics of materials are important factors for selecting the appropriate material due to fluid component changes in the estuarine and coastal areas where seawater and fresh water are mixed. Therefore, for 5083 Al alloy, STS304 and STS316L widely used in the marine environment, anodic polarization experiments were performed to compare the corrosion damage characteristics of each material by three kinds of solutions of 100 % tap water, 50 % tap water+50 % natural seawater and 100 % natural seawater. As a result of the anodic polarization experiments, aluminum alloy (5083) caused locally corrosion on the surface in the tap water, and corrosion damage occurred all over the surface when the seawater was included. Stainless steels (STS304 and STS316L) presented almost no corrosion damage in tap water, but they grew pitting corrosion damage with increasing seawater concentration. STS316L showed better corrosion resistance than STS304.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권5호
• /
• pp.447-452
• /
• 2016

The use of gas as fuel, particularly liquefied natural gas (LNG), has increased in recent years owing to its lower sulfur and particulate emissions compared to fuel oil or marine diesel oil. LNG is a low temperature, volatile fuel with very low flash point. The major challenges of using LNG are related to fuel bunkering, storing, and handling during ship operation. The main components of an LNG fuel system are the bunkering equipment, fuel tanks, vaporizers/heaters, pressure build-up units (PBUs), and gas controlling units. Low-pressure dual-fuel (DF) engines are predominant in small LNG-powered vessels and have been operating in many small- and medium-sized ferries or LNG-fueled generators.(Tamura, K., 2010; Esoy, V., 2011[1][2]) Small ships sailing at coast or offshore rarely have continuous operation at constant engine load in contrast to large ships sailing in the ocean. This is because ship operators need to change the engine load frequently due to various obstacles and narrow channels. Therefore, controlling the overall system performance of a gas supply system during transient operations and decision of bunkering time under a very poor infrastructure condition is crucial. In this study, we analyzed the fuel consumption, the system stability, and the dynamic characteristics in supplying fuel gas for operating conditions with frequent engine load changes using a commercial analysis program. For the model ship, we selected the 'Econuri', Asia's first LNG-powered vessel, which is now in operation at Incheon Port of South Korea.

• 자원환경지질
• /
• 제39권4호
• /
• pp.417-426
• /
• 2006

해양탐사에 있어 자료취득은 자료 처리 및 해석 분야 못지않게 아주 중요한 분야 중의 하나이지만 탐사 장비를 개발하는 상업적인 회사 중심으로 발전을 했기 때문에 해양지구물리 분야를 전공한 사람이라도 자료 취득 분야에 대한 정보가 상대적으로 적을 수 있다. 따라서 해양지구물리 탐사 계획을 수립하는데 필요한 일반적인 탐사 방법과 정보를 소개함으로써 체계적이고 효율적인 탐사를 수행하는데 도움이 되고자 하였다. 탐사 계획을 수립할 때 가장 우선시 할 것이 요구되는 탐사 심도 및 해상력을 근거로 탄성파 탐사 장비를 먼저 선정한 후 측선 간격을 설정한다. 측선 간격은 연구 목적에 따라 다르지만 일반적으로 밝히고자 하는 지하구조 크기보다 작아야 하며 다중빔 음향 측심자료를 100% 취득하고자 하면 장비 특성에 따라 적절하게 설정을 한다. 또한 수심, 중력 및 자력 자료를 기존에 조사한 자료와 통합을 하는 경우에는 측선과 측선 사이의 교차 지점에서 발생하는 교차점 오차에 의한 인위적인 이상대를 제거해야만 올바른 해석을 할 수 있다.

• 해양환경안전학회지
• /
• 제29권2호
• /
• pp.223-229
• /
• 2023

해수이차전지는 해수를 양극으로 사용하는 차세대 이차전지이다, 해양 자원을 사용하여 가격 경쟁력과 높은 친환경성, 그리고 해양 애플리케이션에 적합한 구조를 가진다. 이러한 장점을 기반으로 지속적 연구개발을 통해 자연 해수 노출을 가정한 파우치 타입 및 각형 타입이 개발되어 왔다. 그러나 이차전지는 전기적 특성상 사용 환경에 따라 용량 및 내부 임피던스가 달라진다. 이러한 특성은 전지의 수명 예측에 활용될 뿐만 아니라 활용하고자 하는 상황에 맞는 용량과 출력에 직접적인 영향을 미친다. 따라서 본 논문에서는 해수이차전지의 사용 환경에 따른 용량 측정과 SoC-OCV 측정 방법을 통한 내부 저항을 분석하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권2호
• /
• pp.24-30
• /
• 2000

The high-pressure natural refrigerant $CO_2$ is now being evaluated for use in the motor vehicle air-conditioning systems and for several types of unitary equipment. In this study thermodynamic properties of $CO_2$ is compared to those of R-22 and R-134a and the performance characteristics of $CO_2$ refrigeration cycle is analyzed. The results show that the optimum discharge pressure for the cycle performance exists. New design concept for the $CO_2$ refrigeration system should be developed due to the high-operating pressure of itself.