• 한국항해항만학회지
• /
• 제30권10호
• /
• pp.801-808
• /
• 2006

조선분야의 부가가치 창출은 조선기자재 산업 활성화에 있다 하지만 우리나라 조선 분야 경쟁력은 내실보다는 외형에 치우치고 있는 것이 현실이다. 특히 조선기자재 분야는 선진국과 비교했을 때 빠른 시간 내에 경쟁력을 확보해야 하는 과제를 안고 있다. 이에 본 논문에서는 조선기자재 산업의 경쟁력 제고를 위해 조선기자재 특성, 조선기자재 산업 현황, 수요공급현황, 국산화 현황 등을 분석하고 이를 근거로 조선기자재 산업의 경쟁력 확보방안을 도출하는데 그 목적을 두었다. 이러한 연구를 토대로 조선기자재 산업 발전방향을 모색하고 더불어 경쟁력 확보에 필요한 근거 자료를 제공하고자 한다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.161-161
• /
• 2018

• 수산해양교육연구
• /
• 제22권4호
• /
• pp.516-528
• /
• 2010

The Korean marine equipment industry is, in significant ways, behind the shipbuilding industry. For example, in terms of the number of orders received, the shipbuilding industry has ranked first in the world since 2003. In contrast, the global competitiveness of Korea's marine equipment industry is still relatively weak. This is important not only for the equipment industry, but because these two industries have many links. The structure of this research was firstly, to identify theoretical issues by looking at the characteristics of the marine equipment companies, marketing recognition, uses of marketing, and financial outcomes. Second, the study developed an analytical framework for empirical examination using configuration of each factor. Third, each factor has been analysed empirically. Forth, this study presents the importance of marketing for marine equipment companies within Korea, as well as in a global market. Finally, the study suggests a new marketing strategy for Korea's marine equipment companies to achieve global competitiveness.

• 한국해양학회지:바다
• /
• 제25권4호
• /
• pp.132-159
• /
• 2020

다학제적인 해양연구가 활발하게 수행됨에 따라 다양한 종류의 해양연구시설·장비가 매년 구입되고 있다. 그러나 해양 연구시설·장비 중, 환경자료 수집 및 시료채취 등에 사용하는 다양한 종류의 현장 관측장비들을 현재의 국가연구시설·장비 표준분류체계로 분류하여 관리하는 데 어려움이 있다. 한국해양과학기술원의 경우 미분류상태로 적절히 관리되지 않는 연구시설·장비가 약 30% 정도이다. 본 연구에서는 해양 연구시설·장비를 특성에 따라 중분류군 7개와 소분류군 36개로 분류하고, 국가연구시설장비 표준분류체계에 의해 해양 연구시설·장비를 효율적으로 관리하기 위해 '환경관측/분석장비'라는 대분류군을 국가연구시설장비 표준분류체계에 추가하기를 제안한다. 그리고 해양 연구시설·장비 중 실험실에서 운영하는 장비들은 기존의 국가연구시설장비 표준분류체계에 따라 분류할 것을 제안한다. 이를 통하여 우리나라 전체의 해양관련 연구시설·장비를 체계적으로 분류하여 효과적으로 관리할 수 있을 것으로 기대한다.

• Corrosion Science and Technology
• /
• 제13권1호
• /
• pp.15-19
• /
• 2014

Recently, anti-fouling paints which does not include the poison components such as tin(Sn), copper(Cu) have been increasingly developed in order to inhibit the environmental contamination of the sea water. Moreover, the wear ratios of these anti-fouling paints are very important problem to prolong their life time in economical point of view. In this study, five types of anti-fouling paints as self polishing type were investigated on the relationship between their polarization characteristics and wear ratios. It was verified that there was apparently a good relationship between the wear ratio and polarization characteristics, for example, the wear ratio increased with increasing the impedance ratio, and increased or decreased with the corrosion potential shifting in the negative or positive direction respectively. In addition, the wear ratio decreased with decreasing the corrosion current density. Consequently, it is suggested that we can qualitatively expect the wear ratio by only measuring the polarization characteristics. Therefore, before the examination of the wear ratio was actually carried out in the field, the evaluation of polarization property in the laboratory may give a available reference data for their developments.

• 한국산업융합학회 논문집
• /
• 제25권4_2호
• /
• pp.603-609
• /
• 2022

Bottom hole assembly(BHA) is a key component of the drilling system, consisting of various components and tools(including the drill bit and mud motor) which operate at the bottom of the wellbore and physically drill the rock. This paper investigates the dynamic characteristics of the mud motor which is a drilling propulsion tool. And computational structural analysis is performed to calculate the von-Mises stress and the safety factor of components constituting the mud motor. In this process, the field test data of onshore drilling are used for analysis.

• International Journal of Ocean System Engineering
• /
• 제2권4호
• /
• pp.239-243
• /
• 2012

The cylinder liner of a low speed engine is one of the most important parts of the marine diesel engines used in merchant ships. However, a sufficient degree of precision in the manufacturing method for these cylinder liners has never existed. Conventional honing stones have always been used for machining large marine cylinder liners. Therefore, it is necessary to develop a honing process that optimizes the honing characteristics. In this study, a CBN honing stone was manufactured to improve the honing performance for a cylinder liner and shorten the processing time, and machining experiments on a practical cylinder liner were carried out. Then, a comparison was made between the CBN honing and honing with a conventional GC stone using parameters such as the honing time, machining quantity, and honing cost. As a result, for a #60 CBN stone, the machining amount was significantly improved compared to the conventional one by about $1.1{\mu}m$/min, and in respect to the machining cost, a reduction of about 57% was achieved. However, an improvement in the process with a #800 CBN stone could not be expected because it did not show a significant difference compared to the case of the existing stone. From the above results, if the liner were honed using a CBN honing stone, the rough machining and intermediate processing during an early stage of the honing process were excellent compared to the conventional one. However, we could not find a significant difference in the case of finish honing.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권1호
• /
• pp.46-55
• /
• 2004

Thermal characteristics of the various cooling methods in electronic equipment are studied numerically. A common chip cooling system is modeled as a parallel channel with protruding heat sources. A two-dimensional model has been developed for the numerical analysis of compressible. viscous. laminar flow. and conjugate heat transfer between parallel plates with uniform block heat sources. The finite volume method is used to solve this problem. The assembly consists of two channels formed by two covers and one printed circuit board that is assumed to have three uniform heat source blocks. Various cooling methods are considered to find out the efficient cooling method in a given geometry and heat sources. The velocity and the temperature fields. the local temperature distribution along the surface of blocks. and the maximum temperature in each block are obtained. The results are compared to examine the thermal characteristics of the different cooling methods both quantitatively and qualitatively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1237-1243
• /
• 2001

This paper presents an information about the heat transfer characteristics of impinging jet in eletronic equipment with infrared image processing unit. There have been many experimental investigations and theoretical studies on impinging jet because of application in a wide variety of industrial process including electronic equipment. In this study, we used infrared image processing unit to visualize heat transfer characteristics of impinging jet in eletronic equipment. Infrared image processing unit is one of non-contact temperature measuring methods and it is possible to minimize flow resistance and this measurement is comparatively accurate. The main parameters are distance between nozz1e and heat source. Reynolds number is 6000.

• 해양환경안전학회지
• /
• 제24권5호
• /
• pp.611-618
• /
• 2018

본 연구에서는 이수의 유동 특성을 분석하기 위한 기초 연구로서 상용 코드인 ANSYS CFX 14.5를 이용하여 고체-액체 2상 유동에 대한 수치해석적 연구를 수행하였다. 고체-액체 2상 유동 현상을 모사하기 위해서 균질류 모델과 분리류 모델을 사용하였다. 분리류 모델에서는 Gidaspow의 항력모델을 적용하였으며, 고체 입자에 운동 이론 모델을 적용하였다. 기존의 실험 결과를 기반으로 본 연구에서 사용한 수치해석 모델의 유효성을 검토하였으며, 수치해석은 직경 54.9 mm, 길이 3 m의 수평관에서 체적 분율 0.1~0.5, 속도 1~5 m/s 범위에서 수행되었다. 그리고 압력강하와 고체 입자의 체적 분율 분포를 확인하였으며, 압력강하는 균질류 모델과 분리류 모델이 각각 MAE 17.04 %, 8.98 % 이내에서 실험결과를 잘 예측하였다. 관의 하부에서 높은 체적 분율이 나타나며, 상부로 갈수록 체적 분율은 감소하였다. 그리고 속도가 증가할수록 높이 변화에 따른 체적 분율 분포의 변화는 감소하였으며, 수치해석 결과는 이러한 유동 특성을 잘 예측하였다.