• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.999-1008
• /
• 2023

Deformed fuel rods can cause a partial blockage of the flow area in a subchannel. Such flow blockage will influence the core coolant flow and further the core heat transfer during the reflooding phase and subsequent severe accidents. Nevertheless, most of the system analysis codes simulate the accident process based on the assumed flow blockage ratio, resulting in inconsistencies between simulated results and actual conditions. This paper aims to study the influence of flow blockage in severe accident scenario of the CAP1400 reactor. First, the flow blockage model of ISAA code is improved based on the FRTMB module. Then, the ISAA-FRTMB coupling system is adopted to model and calculate the QUENCH-LOCA-0 experiment. The correctness and validity of the flow blockage model are verified by comparing the peak cladding temperature. Finally, the DVI Line-SBLOCA accident is induced to analyze the influence of flow blockage on subsequent CAP1400 reactor core heat transfer and core degradation. From the results of the DVI Line-SBLOCA accident analysis, it can be concluded that the blockage ratio is in the range of 40%-60%, and the position of severe blockage is the same as that of cladding rupture. The blockage reduces the circulation area of the core coolant, which in turn impacts the heat exchange between the core and the coolant, leading to the early failure and collapse of some core assemblies and accelerating the core degradation process.

• 수산해양기술연구
• /
• 제58권3호
• /
• pp.251-261
• /
• 2022

Tuna purse seine fishery (TPF) constitute more than 60% of distant water fishery production in Korea based on a statistic of 2018, and 28 ships from four different companies were under operation at the western and central Pacific Ocean. On this research, common risk factors during TPF were investigated via enumeration of five years Korean fisherman's insurance payment statement, followed by some counterplans to diminish the accident rate. The accident rate of TPF on the Pacific Ocean peaked by 43.0% in 2014 and constantly decreased to 23.0% until 2018, presenting an average of 33.6%. Meanwhile, the accident rate on the Indian Ocean reached the highest point 55.1% in 2014 and declined to 11.6% in 2016, having an average of 24.7%. The average accident rate of the Indian Ocean scored 8.9% lower than the rate of the Pacific Ocean, but no statistic significance was observed. Depending on the process of operation, 'casting or hauling of net' was the most frequent part that people received an injury (40.4%). When the accidents were classified by their types, 'falling down' was the most recurrent cause of the injuries (28.5%). At the point of severity, the worst injuries were induced by crush hazard. Considering aforementioned accident frequency and severity, all the factors on the accident type list were divided into three different groups including high risk, moderate risk, and common risk. This study is expected to contribute to the reduction of occupational accidents during the work of fishermen and establishment of a safety management system for distance water fishing vessels.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2018년도 추계학술대회
• /
• pp.241-247
• /
• 2018

Deep-sea fishing vessel No. 501 Oryong was fully flooded through its openings and sunk to the bottom of the sea due to the very rough sea weather on the way of evasion after a fishing operation in the Bearing Sea. As a result, many crew members died and/or were missing. In this study, a full-scale ship flooding and sinking simulation was conducted, and the sinking process was analyzed for the precise and scientific investigation of the sinking accident using a highly advanced Modeling & Simulation (M&S) system of the Fluid-Structure Interaction (FSI) analysis technique. To objectively secure the weather and sea states during the sinking accident in the Bering Sea, time-based wind and wave simulation at the region of the sinking accident was conducted and analyzed, and the weather and sea states were realized by simulating the irregular strong wave and wind spectrums. Simulation scenarios were developed and full-scale ship and fluid (air & seawater) modeling was performed for the flooding sinking simulation, by investigating the hull form, structural arrangement & weight distribution, and exterior inflow openings and interior flooding paths through its drawings, and by estimating the main tank capacities and their loading status. It was confirmed that the flooding and sinking accident was slightly different from a general capsize and sinking accident according to the simple loss of stability.

• 한국안전학회지
• /
• 제35권4호
• /
• pp.64-73
• /
• 2020

As Korean government and safety-related organizations make continuous efforts to reduce the number of industrial accidents, accident rate has steadily declined since 2010, thereby recording 0.48% in 2017. However, the number of fatalities due to industrial accidents was 1,987 in 2017, which means that more efforts should be made to reduce the number of industrial accidents. As an essential activity for enhancing the system safety, accident analysis can be effectively used for reducing the number of industrial accidents. Accident analysis aims to understand the process of an accident scenario and to identify the plausible causes of the accident. Accident analysis offers useful information for developing measures for preventing the recurrence of an accident or its similar accidents. However, it seems that the current practice of accident analysis in Korean manufacturing companies takes a simplistic accident model, which is based on a linear and deterministic cause-effect relation. Considering the actual complexities underlying accidents, this would be problematic; it could be more significant in the case of human error-related accidents. Accordingly, it is necessary to use a more elaborated accident model for addressing the complexity and nature of human-error related accidents more systematically. Regarding this, HFACS(Human Factors Analysis and Classification System) can be a viable accident analysis method. It is based on the Swiss cheese model and offers a range of causal factors of a human error-related accident, some of which can be judged as the plausible causes of an accident. HFACS has been widely used in several work domains(e.g. aviation and rail industry) and can be effectively used in Korean industries. However, as HFACS was originally developed in aviation industry, the taxonomy of causal factors may not be easily applied to accidents in Korean industries, particularly manufacturing companies. In addition, the typical characteristics of Korean industries need to be reflected as well. With this issue in mind, we developed HFACS-K as a method for analyzing accidents happening in Korean industries. This paper reports the process of developing HFACS-K, the structure and contents of HFACS-K, and a case study for demonstrating its usefulness.

• 한국산업보건학회지
• /
• 제33권3호
• /
• pp.346-354
• /
• 2023

Objectives: Chemical accidents cause extensive human and environmental damage. Therefore, it is important to prepare measures to prevent their recurrence and minimize future damage through accident investigation. To this end, it is necessary to identify the accident occurrence process and analyze the extent of damage. In this study, the development process and damage range of actual chemical leakage accidents were analyzed using CFD. Methods: For application to actual chemical leakage accidents using FLACS codes specialized for chemical dispersion simulation among CFD codes, release rate calculation and 3D geometry were created, and scenarios for simulation were derived. Results: The development process of the accident and the dispersion behavior of materials were analyzed considering the influencing factors at the time of the accident. In addition, to confirm the validity of the results, we compared the results of the actual damage impact investigation and the simulation analysis results. As a result, both showed similar damage impact ranges. Conclusions: The FLACS code allows the detailed analysis of the simulated dispersion process and concentration of substances similar to real ones. Therefore, it is judged that the analysis method using CFD simulation can be usefully applied as a chemical accident investigation technique.

• 한국안전학회지
• /
• 제38권3호
• /
• pp.43-50
• /
• 2023

Silicone tetrachloride (SiCl₄) leak accidents cause enormous human and environmental damage because it is highly toxic. Some handling facilities use water curtains to reduce the impact range of SiCl₄. Although the water curtain is known as one of the most efficient technologies for post-release mitigation, its effect on reducing SiCl₄ concentration needs to be investigated scientifically and quantitatively. In this study, three-dimensional computational fluid dynamics (CFD) was used to investigate the physical and chemical effects of water curtains as a release-mitigation system for SiCl₄. SiCl₄ is released and dispersed five seconds prior to the operation of the water curtain. Once the water curtain works, the SiCl₄ reacts chemically with the water and its concentration decreases rapidly; it reaches an emergency response planning guidelines level 2 (ERPG-2) of 5 parts per million (ppm) at about 570 m. We observed, however, that the physical effect of water curtains on reducing SiCl₄ concentration is insignificant when the chemical effect is eliminated. These results are crucial since they can be a scientific and quantitative basis for the 'technical guidelines for estimating the accident affected range'. In order to protect the public from chemical accidents, more toxic gas mitigation technologies need to be developed.

• 대한안전경영과학회지
• /
• 제22권1호
• /
• pp.23-32
• /
• 2020

There has been a significant decline in the number of rail accidents in Korea since system safety management activities were introduced. Nonetheless, analyzing and preventing human error-related accidents is still an important issue in railway industry. As a railway system is increasingly automated and intelligent, the mechanism and process of an accident occurrence are more and more complicated. It is now essential to consider a variety of factors and their intricate interactions in the analysis of rail accidents. However, it has proved that traditional accident models and methods based on a linear cause-effect relationship are inadequate to analyze and to assess accidents in complex systems such as railway systems. In order to supplement the limitations of traditional safety methods, recently some systemic safety models and methods have been developed. Of those, FRAM(Functional Resonance Analysis Method) has been recognized as one of the most useful methods for analyzing accidents in complex systems. It reflects the concepts of performance adjustment and performance variability in a system, which are fundamental to understanding the processes of an accident in complex systems. This study aims to apply FRAM to the analysis of a rail accident involving human errors, which occurred recently in South Korea. Through the application of FRAM, we found that it can be a useful alternative to traditional methods in the analysis and assessment of accidents in complex systems. In addition, it was also found that FRAM can help analysts understand the interactions between functional elements of a system in a systematic manner.

• 시큐리티연구
• /
• 제16호
• /
• pp.321-338
• /
• 2008

숭례문 화재사고는 우리나라의 평시 문화재에 대한 안전문제를 잘 보여주는 것으로, 사고가 발생할 때마다 관련자에 대한 책임추궁과 재발방지를 요구하였지만 근본적인 문제점 개선 없이 유사한 사고가 계속 발생하고 있다. 본 연구는 숭례문화재사고의 원인을 분석하고 이에 대한 대책을 제시함으로써 유사한 사고의 재발을 막고 민간경비업무의 특성에 맞는 효율적인 경비업무에 도움을 주는데 목적이 있으며, 경비업무적인 관점에서 화재사고를 분석하는데 중점을 두었다. 안전학자인 하인리히((H. W. Heinrich)는 그가 주장한 연쇄반응이론에서 대부분의 사고가 사람의 불안전한 행동이나 불안전한 상태와 같은 직접적인 원인에 의해 발생한다고 이야기하지만 직접적인 원인을 근본적으로 제거하기 어렵기 때문에 직접적인 원인을 유발할 수 있는 관리?통제적 원인과 같은 간접적인 원인에 대한 분석이 중요하다. 문화재에 대한 소방관련 법규의 제정이 필요하다는 주장이 제기되고 있으나 문화재 안전을 위하여 문화재에 대한 경비관련 법규도 같이 검토되어야 하며, 법규 제정과 함께 사고방지를 위한 기술적인 대책도 함께 검토되어야 한다. 민간경비업무의 영역과 능력, 책임문제에 대한 한계를 극복하기 위한 전문성 확보와 이를 위한 재투자에 관심을 기울여야 하며, 민간경비의 공익성 확보를 위한 경비회사 스스로의 노력이 필요하다. 아울러 사고로 인해 발생한 손해에 대한 배상문제에 대한 현실적인 검토가 필요하다.

• 해양환경안전학회지
• /
• 제22권3호
• /
• pp.259-267
• /
• 2016

The study performs a risk analysis on container ship accidents using accident data collected over the six years from 2006 to 2011, presents the resulting risk level, and suggests three risk mitigation measures to reduce the overall risk, for the safer operation of container ships. More specifically, starting from the initial accident of collision, we developed 13 different accident scenarios using event tree analysis based on which the overall risk level was obtained and presented as a FN curve. Since diverse human factors are the main cause of most of the ship accidents, our study focuses on the effect of reducing human causes on the resulting risk level. For the research we considered the injuries for the calculation of fatality with the help of MAIS. The results show that collision was the main type of accident, accounting for 62 % of all accidents, and the measures employed were proven to be effective in the sense that the risk level was much lowered and the average number of fatalities was also reduced. With more data accumulated, more precise risk level will be calculated with which the practical risk mitigating measures will be also developed. For future study, economic loss and environmental damage as consequences need to be considered.

• 대한조선학회논문집
• /
• 제58권2호
• /
• pp.97-104
• /
• 2021

Together with the emerging of the Eco-ship, the application of large-diameter and high-efficiency propeller required more careful attention than before in the design of the shafting system. After the adoption of Environmentally Acceptable Lubricants (EAL) to the stern tube lubrication oil, a number of aft stern tube bearing accidents have been reported, and a variety of institutions have actively conducted research on the cause relationship. This study attempted to find the cause of the accident by measuring the alignment of the shafting system of a medium-sized product/chemical tanker with aft stern tube bearing damage and analyzing the reaction force of each bearing. In addition, a reasonable solution to the correction of the shaft alignment was suggested and the feasibility was reviewed. Through various measured data and analysis, the actual installation of shafting system was slightly different from the design drawing condition, but it was found that each bearing load distribution was within the allowable range. Therefore, it was confirmed that the cause of this accident was due to the dissatisfaction the misalignment slope of aft stern tube bearing rather than the effect of the bearing overload. As a solution to this cause, countermeasures such as double slope were suggested in the aft stern tube bearing, and the characteristics of EAL also seem to have an indirect effect.