• 생명과학회지
• /
• 제18권1호
• /
• pp.30-37
• /
• 2008

본 연구에서는 남자 고등부 태권도 선수들을 대상으로 하여 등장성운동과 등척성 등장성운동을 혼합하여 복합 훈련을 실시한 차이를 알아보기 위하여 등속성 근 기능 중 최대우력, 동측근력비율, 양측근력비율, 근지구력을 분석한 결과를 다음과 같은 결론으로 나타내었다. 첫째, 최대우력은 좌우측 신굴근 모두에서 등장성 운동집단에 비하여 복합 훈련집단이 유의하게 증가한 것으로 나타났다. 둘째, 동측근력비율, 근지구력은 두 집단 간에 유의한 차이는 나타나지 않았지만, 운동전후에 차이에 있어서는 두 집단 모두 유의하게 증가하였다. 셋째, 양측근력비율은 두 집단 간에 유의한 차이는 나타나지 않았지만, 운동전후에 차이에 있어서는 두 집단 모두 유의하게 감소하였다. 이러한 결과로서 태권도 선수들의 경기력 증가를 위한 주요 체력요소인 평형능력, 근 지구력의 향상을 위한 방법으로 등장성 운동과 복합훈련 중 어떠한 방법으로 실시하여도 근 기능을 향상 시킬 수 있는 운동법으로 생각된다. 그러나 등척성 운동과 등장성 운동을 복합적으로 실시하였을 경우 최대우력이 등장성운동을 실시한 집단에 비하여 유의하게 증가하는 현상으로 보면 태권도 발차기의 파워를 보다 증가시키기 위해서는 등장성 운동과 등척성을 복합적으로 실시하는 운동방법이 보다 효과적인 방법으로 생각된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.527-535
• /
• 2012

This paper reports the active vibration control of plates using positive position feedback controller (PPF). The equations of motion of the plate under force and moment pairs were derived and the equations of PPF controllers were formulated. The effect of the parameters - gain and damping ratio - of the PPF controllers on the open loop transfer function was investigated mainly in terms of the system stability. Increasing the gain of the PPF controller tuned at a mode, the magnitude of the open loop transfer function is increased at all frequencies without changing the phase behavior. The increase of the damping ratio of the PPF controller leads to decrease the magnitude of the open loop transfer function and to modify its phase characteristics to be more stable. Two PPF controllers connected in parallel, Each PPF controller is tuned at the $1^{st}$ and $2^{nd}$ modes, respectively. Their parameters were determined to remain the system to be stable based on the results of the parametric study. A significant reduction in vibration at the 2 modes can be obtained.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.101-109
• /
• 2010

This paper reports active control of clamped beams using acceleration feedback controllers (AF). The equations of motion of clamped beam under force and moment pairs were derived and the equations of AF controllers were formulated. The effect of the parameters - gain and damping ratio - of the AF controllers on the open loop transfer function was investigated mainly in terms of the system stability. Increasing the gain of the AF controller tuned at a mode, the magnitude of the open loop transfer function is increased at all frequencies. The increase of the damping ratio of the AF controller leads to decrease the magnitude of the open loop transfer function and modifies its phase characteristics to be more stable. Three AF controllers connected in parallel were then proposed. Each AF controller is tuned at the $2^{nd}$, $3^{rd}$ and $4^{th}$ modes, respectively. Their parameters were determined to remain the system to be stable based on the results of the parametric study. A significant reduction in vibration at the 3 modes can be obtained.

• 한국소음진동공학회논문집
• /
• 제20권12호
• /
• pp.1190-1199
• /
• 2010

This paper reports active control of clamped beams using acceleration feedback controllers (AF). The equations of motion of clamped beam under force and moment pairs were derived and the equations of AF controllers were formulated. The effect of the parameters - gain and damping ratio - of the AF controllers on the open loop transfer function was investigated mainly in terms of the system stability. Increasing the gain of the AF controller tuned at a mode, the magnitude of the open loop transfer function is increased at all frequencies. The increase of the damping ratio of the AF controller leads to decrease the magnitude of the open loop transfer function and modifies its phase characteristics to be more stable. Three AF controllers connected in parallel were then proposed. Each AF controller is tuned at the 2nd, 3rd and 4th modes, respectively. Their parameters were determined to remain the system to be stable based on the results of the parametric study. A significant reduction in vibration at the 3 modes can be obtained.

• 한국강구조학회 논문집
• /
• 제17권1호통권74호
• /
• pp.23-32
• /
• 2005

본 연구에서는 개단면 리브를 갖는 보강판을 직교이방성 판으로 해석하는 경우 발생하는 정확도 문제를 개선하기 위하여 보강판의 직교이방성 휨 강성에 대한 강성 수정 계수를 제안하였다. 매개변수로는 강성비와 변장비를 선택하고, 변장비와 지지조건을 달리하며 여러 가지 평강 리브와 L형 리브를 갖는 보강판의 강성 수정 계수에 대한 매개변수 연구를 수행하였다. 보강판을 등방성 판요소와 직교이방성 판요소로 모델링하여 해석한 결과, 강성 수정 계수는 변장비 1 미만의 경우 변장비와 상관없이 리브 간격 별로 강성비에 대한 하나의 함수로 표현 가능하고, 변장비 1 이상인 경우 리브 간격 및 변장비에 따른 처짐 비율 차이가 크지 않아 하나의 통합된 함수로 대표할 수 있음을 알 수 있었다. 또한, 강성 수정 계수에 대한 지지조건의 영향은 크지 않으며, 리브 형태별로 다른 강성 수정 계수 함수가 필요함을 알 수 있었다. 강성 수정 계수 함수를 예제에 적용한 결과, 해의 정확도가 크게 향상되어, 개단면 리브를 갖는 보강판을 직교이방성 판으로 해석하는 경우 본 연구에서 제안한 강성 수정 계수 함수를 적용하면, 간편하게 좀 더 정확한 결과를 얻을 수 있을 것으로 판단된다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권2호
• /
• pp.78-89
• /
• 2016

Purpose: In this paper, we investigate whether the endeavors for Six Sigma quality management by a firm have positive effects on its financial performance and the length of Six Sigma implemented period affects its financial status. We find a relationship between Six Sigma implemented period and several financial performance index using a smoothing spline function. Methods: A smoothing spline function is used in order to analyze the relationship between efforts for quality management and financial performance. Specifically, the return on assets, return on equity, sales cost and business fee are investigated as dependent variables and the efforts for quality management as independent variable. Results: As a result of the analysis, the indication is that companies that put effects into the Six Sigma quality management have a positive result in its financial status. In detail, the efforts for Six Sigma quality management have positive effects on total asset turnover ratio and Six Sigma implemented period on net income to net sales ratio. Additionally, companies with longer (shorter) period of Six Sigma program have more (less) improvement in its financial status. Conclusion: It can be concluded that the company's efforts for quality management positively influence financial performance.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.125-133
• /
• 2013

PURPOSES : The purpose of this study is to propose delay-minimizing operation methodology of a signalized intersection based upon optimization of lane-uses on approaching lanes for an intersection. METHODS : For the optimization model of lane-uses, a set of constraints are set up to ensure feasibility and safety of the lane-uses, traffic flow, and signal settings. Minimization of demand to saturation flow ratio of a dual-ring signal control system is introduced to the objective function for delay minimization and effective signal operation. Using the optimized lane-uses, signal timings are optimized by delay-based model of TRANSYT-7F. RESULTS : It was found that the proposed objective function is great relation with delay time for an intersection. From the experimental results, the method was approved to be effective in reducing delay time. Especially, cases for two left-turn lanes reduced greater delays than those for a left turn lane. It is noticed that the cases for different traffic volume by approach reduced greater delays than those for the same traffic volume by approach. CONCLUSIONS : It was concluded that the objective function is proper for lane-uses optimizing model and the operation method is effective in reducing delay time for signalized intersections.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2403-2406
• /
• 2003

When viewing images, the relative luminance of the surround has a profound impact on the apparent contrast of the image. The dark surround causes the image elements to appear lighter than those viewed in an illuminated surround. For this reason, it is worthwhile to briefly review the general results of brightness sealing under a various viewing condition. Two of the most often cited parers on the topic of brightness scaling are Stevens-stevens and Bartleson-Breneman's function. There are, however, significant differences between the perceptual functions for simple-field and complex-field viewing. In this paper, we research the relationship between Steven's power law and Bartleson-Breneman's function. We present an appropriate brightness perception function due to TV system viewing conditions. Highlight luminance peak and absolute brightness threshold value in various adaptation levels are obtained from the proposed brightness function . Also, the luminance value of black level to produce the same contrast ratio with variety of display highlight luminance peak is obtained from the proposed brightness function.

• 전력전자학회논문지
• /
• 제20권5호
• /
• pp.421-428
• /
• 2015

An advanced direct torque control (DTC) with pulse width modulation (PWM) method is presented in this paper. The duty ratio calculation of the selected voltage vector is based on the voltage functions of the selected voltage vector according to the sector angle. The proposed DTC uses a conventional DTC scheme with six sector divisions and switching rules. However, the winding voltages are supplied by the PWM approach. Furthermore, the duty ratio of the switching voltage vector is determined by the flux, torque error, and motor speed. The base voltage that shall determine the duty ratio can be calculated by approximate voltage functions according to the voltage angle. For the calculation of base voltages, second-order quadratic functions are used to express the output voltage of the selected voltage vector according to voltage angle. The coefficients for the second-order quadratic functions are selected by the voltage vector, which is determined by the switching rules of the DTC. In addition, the voltage functions are calculated by the coefficients and voltage angle between the voltage vector and rotor position. The switching voltages from the calculated duty ratio can supply the proper torque and flux to reduce the ripple and error. The proposed control scheme is verified through practical experimental comparisons.

• 동아시아식생활학회지
• /
• 제9권4호
• /
• pp.468-474
• /
• 1999

To make rice cake with squid ink, the squid ink dilulted in fifteen times was added to rice flour in the ratio of 0%, 2%. 4%, 6% and 8% respectively. Then, the squid inky rice cake was tested in physical function and chromaticity. Rheometer test was also included in this experiment. In physical function test, it showed that the inky rice cake with 6% and 8% ratio was the best in preference. In the chromaticity test, as the adding ratio of squid ink increases, the brightness decreased. The red and yellow brightness of 8% inky rice cake showed high. The results of rheometer test are as follows. In hardness, the inky rice cake with 2% adding ratio was high and the 6% inky rice cake was low. In cohesiveness, the 0% inky rice cake was high and the 8% inky rice cake was low. In gumminess, the 2% inky rice cake was high and the 6% inky rice cake was low. In brittleness, the 2% inky rice cake was high and the 6% inky rice cake was low. With correlation analysis, 1 could reach the following. The overall quality of inky rice cake was correlated with all test items except chewiness. The moistness was correlated with flavor, grain and chewiness. Also, the 8% inky rice cake was correlated with the inky rice cakes with the other adding ratios in all aspects of test. Futhermore, in the results of rheometer test. the hardness was correlated with the other three kinds of characteristics.