• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1592-1601
• /
• 1998

The growing use of unlicensed wireless systems has spurred interest in the 2.4 Ghz ISM band. In order to facilitate the efficient design of such systems, understandings of the propserties of radio wave propagation in buildings is necessary. Many authors have reported about statistical propagation models based on the extensive measurements in buildings. However, measurement based statistical analysis will not be enough for the optimum deployment of the communication systems in the specific building. Aviding expensive measurements in the individual buildings prior to installation, or adjustments afterwards, theoretical prediction models have been developed to predict the path loss and delay spread from the building floor plane. Predictions shows good agreements with measurements except for a few environments which was surrounded by heavy scatterers.

• Journal of Information Processing Systems
• /
• v.15 no.2
• /
• pp.305-319
• /
• 2019

The prediction of the sum of container is very important in the field of container transport. Many influencing factors can affect the prediction results. These factors are usually composed of many variables, whose composition is often very complex. In this paper, we use gray relational analysis to set up a proper forecast index system for the prediction of the sum of containers in foreign trade. To address the issue of the low accuracy of the traditional prediction models and the problem of the difficulty of fully considering all the factors and other issues, this paper puts forward a prediction model which is combined with a back-propagation (BP) neural networks and the support vector machine (SVM). First, it gives the prediction with the data normalized by the BP neural network and generates a preliminary forecast data. Second, it employs SVM for the residual correction calculation for the results based on the preliminary data. The results of practical examples show that the overall relative error of the combined prediction model is no more than 1.5%, which is less than the relative error of the single prediction models. It is hoped that the research can provide a useful reference for the prediction of the sum of container and related studies.

• International Journal of Contents
• /
• v.12 no.1
• /
• pp.49-53
• /
• 2016

"Hahoe Village" in Andong region is an UNESCO World Heritage Site. It should be protected against various disasters such as fire, flooding, earthquake, etc. Among these disasters, flooding has drastic impact on the lives and properties in a wide area. Since "Hahoe Village" is adjacent to Nakdong River, it is important to monitor the water level near the village. In this paper, we developed a hydrological modelling using multi-layer perceptron (MLP) to predict the water level of Nakdong River near "Hahoe Village". To develop the prediction model, error back-propagation (EBP) algorithm was used to train the MLP with water level data near the village and rainfall data at the upper reaches of the village. After training with data in 2012 and 2013, we verified the prediction performance of MLP with untrained data in 2014.

• The KIPS Transactions:PartD
• /
• v.10D no.4
• /
• pp.689-696
• /
• 2003

Criticality prediction models that determine whether a design entity is fault-prone or non fault-prone are used for identifying trouble spots of software system in analysis or design phases. Many criticality prediction models for identifying fault-prone modules using complexity metrics have been suggested. But most of them need training data set. Unfortunately very few organizations have their own training data. To solve this problem, this paper builds a new prediction model, KSM, based on Kohonen SOM neural networks. KSM is implemented and compared with a well-known prediction model, BackPropagation neural network Model (BPM), considering internal characteristics, utilization cost and accuracy of prediction. As a result, this paper shows that KSM has comparative performance with BPM.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.3
• /
• pp.236-242
• /
• 2002

This paper presents some advanced and supplemental methods to enhance the accuracy In case of calculating geometric divergence attenuation, attenuation by multiple screening structures, ground attenuation at unflat surfaces of sound during propagation outdoors by the methods specified in ISO 9613-2. Moreover, a calculation method for considering short-term wind effect, specified in ASJ Model-1998, is also introduced. To verity the accuracy of adopted methods, we have carried out highway traffic noise prediction and measurement at tile twelve locations appearing representative road shapes and structures, such as flat, retained cut, elevated, barrier-constructed roads. From the results, we have confirmed the predicted results show good correspondence with the measured at direct, diffracted and reflected sound fields within 30 m from the center of near side lane.

• Agricultural and Biosystems Engineering
• /
• v.3 no.1
• /
• pp.18-28
• /
• 2002

Neural network based models were developed and evaluated for predicting corn yield from aerial images based on 1998 and 1994 image data. The model used images in multi-spectral bands such as R, G, B, and IR (Red, Green, Blue and Infrared). The inputs to the neural network consisted of mean and standard deviation of multispectral bands of the aerial images. Performances of several neural network architectures using back-propagation with momentum were compared. The maximum yield prediction accuracy obtained was 97.81%. The BPNN model prediction accuracy could be enhanced by using more number of observations to the model, other data transformation techniques, or by performing optical calibration of the aerial image.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.564-569
• /
• 2013

An accurate railway environmental noise prediction model is required to make the proper solution of the railway noise problems. In this paper, an engineering model for predicting the noise of conventional passenger cars is presented considering the acoustic source strength in octave-band frequencies and the propagation over grounds with varying surface properties. Since the formation of a train can be variable, the source strength of each locomotive and passenger car was estimated by measuring the pass-by noise and analysing the wheel-rail rolling noise. Some validation cases show on the average small differences between the predictions of the present model and the measurement results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.3
• /
• pp.219-229
• /
• 1996

Path loss prediction method, one of the most essential parts in measuring the service area in mobile telecommunication, has been developed for many years. But, wave propagation depends on many kinds of environmental factors such as frequency, distance, the heights of transmitting and receiving antenna and the terrain status(buildings in large city, hilly terrain, mountain). These are the main reasons that the propagation models developed in foreign environments can not fit into Korean propagation condition. In this paper, therefore, we performed the measurement in Korean terrain environment in pager frequency band after deviding the terrain characteristics into six types. With this measured data, we derived several curves that follows the long-term wave progagation behavior and developed the wave propagftion prediction model which calculates the field strength at any point in the service area. The proposed model estimates the field strength in two categories, LOS(line-of-sight), or non LOS. We applied this model using the digital terrain data base and compared with the measured data. The result shows that the errors were between 3~9dB, which turned out to be practical.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.263-270
• /
• 2013

Recently, the prediction and analysis technology of marine environment are actively being studied since the ocean resources in the world is taken notice. The prediction of marine disaster by automatic collecting marine environment data and analyzing the collected data can contribute to minimized the damages with respect to marine pollution of oil spill and fisheries damage by red tide blooms and marine environment upsets. However the studies of the marine environment monitoring and analysis system are limited in South Korea. In this paper, we study the marine disasters prediction system model to analyze collection marine information of out sea and near sea. This paper proposes the models for the marine disasters prediction system as communication system model, a marine environment data monitoring system model, prediction and analyzing system model, and situations propagation system model. The red tide prediction model and summarizing and analyzing model is proposed for prediction and analyzing system model.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.1
• /
• pp.23-27
• /
• 2017

This paper aims to develop a prediction model for the product quality of a casting process. Prediction of the product quality utilizes an artificial neural network (ANN) in order to renovate the manufacturing technology of the root industry. Various aspects of the research on the prediction algorithm for the casting process using an ANN have been investigated. First, the key process parameters have been selected by means of a statistics analysis of the process data. Then, the optimal number of the layers and neurons in the ANN structure is established. Next, feed-forward back propagation and the Levenberg-Marquardt algorithm are selected to be used for training. Simulation of the predicted product quality shows that the prediction is accurate. Finally, the proposed method shows that use of the ANN can be an effective tool for predicting the results of the casting process.