• Title/Summary/Keyword: The Middle Frequency Band

Search Result 61, Processing Time 0.025 seconds

Analysis of the Frequency Properties of Range Measurement System using 900Mhz Band RF (900Mhz 대역 RF를 이용한 거리측정 시스템의 주파수특성 분석)

  • Kim Tae-Soo;Oh Inn-Yeal;Chun Joong-Chang
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2006.05a
    • /
    • pp.997-1000
    • /
    • 2006
  • In this paper, we have used the 900Mha RF band and produced the transmitter-receivers to measure the distance of moving range of a crane. We selected the analog signal of 450Khz middle frequency band of the RF Baseset module, and the property data of phase response is analysed to estimate the range distance. We have earned the good results from the experiment.

  • PDF

Harmonic Suppression and Broadening Bandwidth of Band Pass Filter Using Aperture and Photonic Band Gap Structure

  • Seo, Chul-Hun
    • Journal of electromagnetic engineering and science
    • /
    • v.5 no.4
    • /
    • pp.208-212
    • /
    • 2005
  • In this paper, we introduced a band-pass filter employed the PBG structure and the aperture on the ground together. The harmonics of band pass filter have been suppressed by employing the PBG structure and the bandwidth of it has been broadened by using the aperture on the ground. The designed PBG cells have three different sizes. The largest cells, the middle cells, and the smallest cells have suppressed the multiple of second harmonics, the multiple of third harmonics, and the multiple of fifth harmonics, respectively. The center frequency has been 2.18 GHz. The bandwidth has been increased from 230 MHz up to 310 MHz(80 MHz, about $35\%$) by the aperture and the ripple characteristics in passband have been improved and the harmonic frequencies have been suppressed about 30 dB by the PBG.

Brucellosis outbreak of Korean indigenous cattle at Yeongwol and Pyeongchang county in Korea

  • Kim Song-Tae;Yoon Kyo-Bok;Kang Tae-Kyu;Bak Won-Hern;Lee Jung-Hyun;Chung Dong-Su
    • Korean Journal of Veterinary Service
    • /
    • v.28 no.4
    • /
    • pp.387-392
    • /
    • 2005
  • This study was attempted to investigate the properties of brucellosis in Korean indigenous cattle at the Yeongwol and Pyeongchang county. Brucella spp was differentiated and identified from cotyledons, amniotic fluids and supramammary lymph nodes which confirmed with clinical, serological, epidemiological evidences (69 cases) from January to June, 2004. Isolation frequency of this causative agent from supramammary lymph nodes, cotyledons and amniotic fluids from 38 pregnant Korean indigenous cattle were $39.1\%,\;87.5\%,\;and\;63.2\%$, respectively, and finally confirmed with Brucella abortus biotype 1 through biochemical and serological test. A Brucella specific DNA with 711bp band was detected by PCR assay using BCSP primer. The two cases were definite epidemiological evidences that infected Korean indigenous cattle acrossed the border to Yeongwol and Pyeongchang from near two provinces. Effective prevention programs are urgently needed for further spreading this epidemics.

Estimation of Effects of Underwater Acoustic Channel Capacity Due to the Bubbles in the High Frequency Near the Coastal Area

  • Zhou, Guoqing;Shim, Tae-Bo;Kim, Young-Gyu
    • The Journal of the Acoustical Society of Korea
    • /
    • v.27 no.3E
    • /
    • pp.69-76
    • /
    • 2008
  • Measurements of bubble size and distribution in the surface layer of the sea, wind speed, and variation of ocean environments were made continually over a four-day period in an experiment conducted in the South Sea of Korea during 17-20 September 2007. Theoretical background of bubble population model indicates that bubble population is a function of the depth, range and wind speed and bubble effects on sound speed shows that sound speed varies with frequency. Observational evidence exhibited that the middle size bubble population fit the model very well, however, smaller ones can not follow the model probably due to their short lifetime. Meanwhile, there is also a hysteresis effect of void fraction. Observational evidence also indicates that strong changes in sound speed are produced by the presence of swarms of micro bubbles especially from 7 kHz to 50 kHz, and calculation results are consistent with the measured data in the high frequency band, but inconsistent in the low frequency band. Based on the measurements of the sound speed and high frequency transmission configuration in the bubble layer, we present an estimation of underwater acoustic channel capacity in the bubble layer.

Design of Compact Stepped Open Slot Antenna for UWB Applications (UWB 응용을 위한 소형 계단형 개방 슬롯 안테나 설계)

  • Yeo, Junho;Lee, Jong-Ig
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.21 no.1
    • /
    • pp.1-7
    • /
    • 2017
  • In this paper, a design method for a compact stepped open slot antenna for an operation in the UWB band is studied. The proposed antenna is miniaturized by inserting L-shaped slots on the ground plane of the stepped open slot antenna through the creation of a resonance in the low frequency, and a strip director is appended to the antenna in order to increase the gain in the middle and high frequency regions. The effects of varying the length of the L-shaped slots, the distance between the director and the slot antenna, and the director length on input reflection coefficient and realized gain characteristics of the proposed antenna are analyzed. The optimized antenna with the size of $30mm{\times}30mm$ is fabricated on an FR4 substrate, and the experiment results show that the antenna has a frequency band of 3.02-11.04 GHz for a VSWR < 2, which assures the operation in the UWB band.

Miniaturization of Open Stepped Slot Antenna (계단형 개방 슬롯 안테나의 소형화)

  • Yeo, Junho;Lee, Jong-Ig
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2016.10a
    • /
    • pp.61-62
    • /
    • 2016
  • In this paper, a design method for a compact stepped open slot antenna for an operation in the UWB band is studied. The proposed antenna is miniaturized by inserting L-shaped slots on the ground plane of the stepped open slot antenna through the creation of a resonance in the low frequency, and a strip director is appended to the antenna in order to increase the gain in the middle and high frequency regions. The effects of varying the length of the L-shaped slots, the distance between the director and the slot antenna, and the director length on input reflection coefficient and realized gain characteristics of the proposed antenna are analyzed. The optimized antenna with the size of $30mm{\times}30mm$ is fabricated on an FR4 substrate, and the experiment results show that the antenna has a frequency band of 3.02-11.04 GHz for a VSWR < 2, which assures the operation in the UWB band.

  • PDF

A Novel Monopole Antenna with Two Arc-Shaped Strips for WLAN/WiMAX Application

  • Yoon, Joong Han;Ha, Sung Jae;Rhee, Young Chul
    • Journal of electromagnetic engineering and science
    • /
    • v.15 no.1
    • /
    • pp.6-13
    • /
    • 2015
  • In this paper, a novel monopole antenna for WLAN/WiMAX application is presented. The proposed antenna consists of two arc-shaped strips, a vertical strip, and a slot in the ground plane. In this study, a prototype of the proposed triple-band antenna was designed, fabricated, and tested. The quantitative and experimental results demonstrate that the proposed antenna satisfy the -10 dB impedance bandwidth requirement of 440 MHz for 2.4/2.5 GHz bands (from 2.26 to 2.70 GHz), 970 MHz for 3.5 GHz bands (from 3.27 to 4.24 GHz), and 870 MHz for the GHz bands (from 5.08 to 5.95 GHz), while simultaneously covering the WLAN and WiMAX bands. In addition, the presented triple-band antenna has an omnidirectional radiation pattern at all three frequency bands with an antenna gain of 4.45 dBi for the lowest band, 2.04 dBi for the middle band, and 3.98 dBi for the highest band.

Study on frequency response of implantable microphone and vibrating transducer for the gain compensation of implantable middle ear hearing aid (이식형 마이크로폰과 진동체를 갖는 인공중이의 이득 보상을 위한 주파수 특성 고찰)

  • Jung, Eui-Sung;Seong, Ki-Woong;Lim, Hyung-Gyu;Lee, Jang-Woo;Kim, Dong-Wook;Lee, Jyung-Hyun;Kim, Myoung-Nam;Cho, Jin-Ho
    • Journal of Sensor Science and Technology
    • /
    • v.19 no.5
    • /
    • pp.361-368
    • /
    • 2010
  • ACROSS device, which is composed of an implantable microphone, a signal processor, and a vibrating transducer, is a fullyimplantable middle ear hearing device(F-IMEHD) for the recovery of patients with hearing loss. And since a microphone is implanted under skin and tissue at the temporal bones, the amplitude of the sound wave is attenuated by absorption and scattering. And the vibrating transducer attached to the ossicular chain caused also the different displacement from characteristic of the stapes. For the gain control of auditory signals, most of implantable hearing devices with the digital audio signal processor still apply to fitting rules of conventional hearing aid without regard to the effect of the implanted microphone and the vibrating transducer. So it should be taken into account the effect of the implantable microphone and the vibrating transducer to use the conventional audio fitting rule. The aim of this study was to measure gain characteristics caused by the implanted microphone and the vibrating transducer attached to the ossicle chains for the gain compensation of ACROSS device. Differential floating mass transducers (DFMT) of ACROSS device were clipped on four cadaver temporal bones. And after placing the DFMT on them, displacements of the ossicle chain with the DFMT operated by 1 $mA_{peak}$ current was measured using laser Doppler vibrometer. And the sensitivity of microphones under the sampled pig skin and the skin of 3 rat back were measured by stimulus of pure tones in frequency from 0.1 to 8.9 kHz. And we confirmed that the microphone implanted under skin showed poorer frequency response in the acoustic high-frequency band than it in the low- to mid- frequency band, and the resonant frequency of the stapes vibration was changed by attaching the DFMT on the incus, the displacement of the DFMT driven with 1 $mA_{rms}$ was higher by the amount of about 20 dB than that of cadaver's stapes driven by the sound presssure of 94 dB SPL in resonance frequency range.

Digital Watermarking Scheme based on SVD and Triplet (SVD 및 트리플릿 기반의 디지털 워터마킹 기법)

  • Park, Byung-Su;Chu, Hyung-Suk;An, Chong-Koo
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.58 no.5
    • /
    • pp.1041-1046
    • /
    • 2009
  • In this paper, we proposed a robust watermark scheme for image based on SVD(Singular Value Transform) and Triplet. First, the original image is decomposed by using 3-level DWT, and then used the singular values changed for embedding and extracting of the watermark sequence in LL3 band. Since the matrix of singular values is not easily altered with various signal processing noises, the embedded watermark sequence has the ability to withstand various signal processing noise attacks. Nevertheless, this method does not guarantee geometric transformation(such as rotation, cropping, etc.) because the geometric transformation changes the matrix size. In this case, the watermark sequence cannot be extracted. To compensate for the above weaknesses, a method which uses the triplet for embedding a barcode image watermark in the middle of frequency band is proposed. In order to generate the barcode image watermark, the pattern of the watermark sequence embedded in a LL3 band is used. According to this method, the watermark information can be extracted from attacked images.

Band-switchable Terahertz Metamaterial Based on an Etched VO2 Thin Film (식각된 VO2 박막을 이용한 밴드-전환형 테라헤르츠파 메타물질)

  • Ryu, Han-Cheol
    • Korean Journal of Optics and Photonics
    • /
    • v.31 no.1
    • /
    • pp.31-36
    • /
    • 2020
  • We propose a band-switchable terahertz metamaterial based on an etched vanadium dioxide (VO2) thin film. A line of etched VO2 thin film was placed in the center gap of the split square-loop shape for the tunability of the metamaterial. The resonance frequency of the metamaterial can be switched from the 1.4 THz band to the 0.7 THz band, according to the insulator-metal phase transition in the VO2 thin film. The absolute difference in the transmittance of the metamaterial was 78.5% and 65.8% at 0.7 THz and 1.4 THz respectively, according to the band switching. The differential phase shift was around 90°, and the transmittance was stably maintained between 40% and 60% in the middle band of the two switchable resonance-frequency bands.