• Clinical and Experimental Vaccine Research
• /
• 제12권2호
• /
• pp.87-96
• /
• 2023

The fast development of vaccines against the novel coronavirus disease is among the most critical steps taken to control this potentially fatal viral disease. Like other vaccines, the coronavirus disease 2019 (COVID-19) vaccines can also cause unwanted reactions. Erythema multiforme (EM) is among the oral mucocutaneous side effects of COVID-19 vaccines. This study aimed to comprehensively review the reported cases of EM since the global onset of COVID-19 vaccination. Data from 31 relevant studies regarding the type and dose of COVID-19 vaccines administered, time of initiation of symptoms, age, and gender of patients, site of involvement, patients' medical history, and treatment options were extracted. In total, 90 patients were identified with EM as a side effect of COVID-19 vaccination across studies. EM had the highest frequency after receiving the first dose of mRNA vaccines in older individuals. The first symptoms of EM appeared in less than 3 days in 45% and after 3 days in 55% of patients. EM is not a common side effect of COVID-19 vaccination, and fear of its occurrence should not impede vaccination.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.141-143
• /
• 2003

The aim of this study is to evaluate the susceptibility of landslides at Clicap area, Indonesia , using a Geographic Information System (GIS). Landslide locations were identified from field surveys. The topographic and geological map were collected and constructed into a spatial database using GIS. The factors that influence landslide occurrence, such as slope, aspect and curvature of topography, were calculated from the topographic database and lihology and fault was extracted from the geological database. Then landslide susceptibility was analyzed using the landslide-occurrence factors by likelihood methods. The results of the analysis were verified using the landslide location data. The GIS was used to analyze the vast amount of data efficiently . The results can be used to reduce associated hazards, and to plan land use and construction.

• 산업기술연구
• /
• 제31권A호
• /
• pp.87-94
• /
• 2011

This paper is results of analyzing characteristics of landslides occurred in Wonju, Gangwondo, around July, 16 in 2006, caused by heavy rainfall and antecedent precipitation by two typhoons of Ewiniar and Bilis. The main causes of landslides were antecedent precipitation during July 8 to 15, resulting in weakening grounds by increasing the degree of saturation previously, and the heavy rainfall during July 15 to 16. Most of landslides in natural slopes were transitional failures occurred along the boundary between the residual weathered soil in shallow depth and the hard mother rock. From results of conclusive analyses regarding 28 sites in Wonju region where landslides occurred, the slope length of landslide, the slope width, and the slope area were less than 50m with 71% of frequency, 20m with 79% of frequency and $300m^2$ of 64% of frequency respectively. The average value of slope angle was $35^{\circ}$. The most probable direction of slope was found to be north because of topography and advancing direction of seasonal rain front.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.213-221
• /
• 2022

Defects are the risk factors in the construction process of buildings. They cause damage, delaying the construction duration. They especially cause adverse effects on the top-down construction method. This study analyzed the degree of construction delay induced by each work type, focusing on defects in the top-down method. Then, we derived construction delay induction coefficient from different work types in order by using the severity of construction delay per defect and the occurrence probability of defect; this assessment model measures the impact of defects on construction delay for each work type. Furthermore, by comparing each work type based on the defect frequency and the construction delay induction coefficient, we found work types that need to be administered attentively. We identified that plastering work was easy to overlook, requiring caution in defect management. This study provides an efficient defect management system suitable for the buildings that are built using the top-down construction method.

• Structural Monitoring and Maintenance
• /
• 제9권3호
• /
• pp.221-235
• /
• 2022

Among nondestructive damage detection methods, impedance-based methods have been recognized as an effective technique for damage identification in many kinds of structures. This paper proposes a method to detect cracks in metal structures by combining electro-mechanical impedance (EMI) responses and artificial neural networks (ANN). Firstly, the theories of EMI responses and impedance-based damage detection methods are described. Secondly, the reliability of numerical simulations for impedance responses is demonstrated by comparing to pre-published results for an aluminum beam. Thirdly, the proposed method is used to detect cracks in the beam. The RMSD (root mean square deviation) index is used to alarm the occurrence of the cracks, and the multi-layer perceptron (MLP) ANN is employed to identify the location and size of the cracks. The selection of the effective frequency range is also investigated. The analysis results reveal that the proposed method accurately detects the cracks' occurrence, location, and size in metal structures.

• 한국항해항만학회지
• /
• 제29권2호
• /
• pp.151-157
• /
• 2005

During the period of every summer to early autumn seasons, ships have been wrecked or grounded from effect of a typhoon in the water areas around Korean Peninsula Typhoon Rusa killed more than 100 people in September 2002. Super Typhoon Maemi passed southeast of South Korea in September 12-13, 2003, with a strong gale blowing at a record 60 m/s and caused much ship groundings, collisions and sinkings over 3000 in dockyards, harbors and places of refuge. These are things that could have been prevented had there merely been prior warning. This study outlines the occurrence characteristics of maritime accidents caused by a typhoon in South Korea for the period from 1962 to 2002. The distribution of the accident records is also compared with the trajectories, winds, central pressures of typhoons, passed during the 1990-2003. It is shown that attack frequency of typhoon and number of marine accidents is the highest in August and the marine accidents due to typhoon have a close relation to the distribution of accumulated wind and pressure fields.

• 한국압력기기공학회 논문집
• /
• 제6권2호
• /
• pp.16-19
• /
• 2010

In this study, the axial ODSCC occurrence of domestic OPR 1000 steam generator tube was caused by the tube weakness and the sludge accumulation in the secondary side of steam generator. Inconel 600 HTMA used as tube material is related to most of tube leakage accidents in the world and also these ODSCCs were detected mainly at the 5th TSP(Tube Support Plate) to the 8th TSP of hot leg side. These elevations(5th TSP to 8th TSP) pave the way for the sludge accumulation. As a result of EC(Eddy Current) Bobbin and RPC data analysis, ODSCCs were occurred at contact points of tube and tube support plate. The more accumulated sludge, the higher occurrence frequency of ODSCC.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 연구회 합동 학술발표회 논문집
• /
• pp.60-63
• /
• 1998

The widely used power supply (Switched Mode Power Supply : SMPS) as a source in order to stabilize direct current for electronics or communication systems has merits, when it is compared to the existing source for stability, such as high efficiency, small size, light weight by means of switching process of the semiconductor device which controls the flow of power. However, due to existence of inductors and capacitors used for charging energy, the source part in electronic or communication systems hasn't reached the speed, that is supposed to get, for achieving smaller size and lighter weight. In order to get smallness in size, it is necessary to increase switching frequency. And that makes devices for measuring energy smaller. Nevertheless, the rise switching frequency brings increases in switching loss, inductor loss, and power loss. Also, the occurrence of surge and noise caused by high frequency switching is getting higher. The resonant converter has been considered as one of methods that give solutions for the problems of SMPS and that method have been paid attention as a source technology in electronics and communication.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2005년도 춘계 학술대회 발표논문집
• /
• pp.15-19
• /
• 2005

The aim of this study is to provide some information on frequencies of occurrence for units of Korean phonemes and syllables analysing spontaneous speech spoken by 3 to 8-year-old Korean children. 49 Korean Children(7${\sim}$10 children for each age) were employed as subjects for this study. Speech data were recorded and phonemically transcribed. 120 utterances for each child were selected for analysis except one child whose data were only 91 utterances. The data size of the present study were 5,971 utterances, 5,1554 syllables, and 105491 phonemes. Among 19 consonants, /n/ showed highest frequency rate of these four conson ants were over 50% for all age groups. Among 18 vowels, /a/ was the most frequent one and /i/ and / ${\wedge}$ were the second and third respectively. The frequency rate of these four consonants were over 50% for all age groups. Frequently occurring syllable types were a part of grammatical word in most cases. Only 5${\sim}$6% of syllable types covered 50% of speech.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2185-2190
• /
• 2008

In a high speed train, multi-layered panels for floor, side wall and roof are important sound insulating part. As these multi-layered panels require high bending strength vs. weight, corrugated steels or aluminium honeycomb panel are generally used. However, with some inevitable factors, these panels show lower sound insulation performance than that of the plate with the same weight. Transmission loss(TL) often severely decreases in a particular frequency range because of the decrease of the critical frequency, occurrence of local resonance modes and cavity resonance modes, which are not shown in a plate. In this study, frequency range and cause of the TL drop are investigated on the corrugated and honeycomb panels.