• Journal of Applied Reliability
• /
• v.15 no.2
• /
• pp.108-123
• /
• 2015

Test and Evaluation (T&E) have been verifying the level of it's technological skill and the needed operational status of the development weapons. If the overall spectrum of test and evaluation is fulfilled substantially in the production & deployment, the needed level of the weapon system will be enhanced and also the reliability status will become higher considerably. We can know currently these issues through the mass media and all kinds of the news regarding the defense industry and programs. And so this article have studied the method of enhancing reliability of the test and evaluation, the 6 variables were selected through the discussion of the professional group. The the test and evaluation group needs consistently the professional training systems. After DT&E, we have to the event to verify the technical level of the development systems. We have to take the high level of the kinds of the environmental test. Scientific methods like system engineering will be adapted in process of the test and evaluation. The number of suitable test prototype in the test and evaluation is analysed more systematically. And we need to establish the standardization of the test and evaluation. If 6 variables are well analysed and adapted in the working field, the reliability of the test and evaluation will be considerably, the defense industry will take the chance to develope the future-oriented.

• Journal of the Korean Home Economics Association
• /
• v.35 no.2
• /
• pp.1-17
• /
• 1997

The purpose of this study is to identify the level of children's consciousness and behavior for the environmental conservation, so that provides some fundamental information for the overcome of environmental crisis and reinforces a consumer education for the childrens at home. The subjects were randomly selected form the 4th, 5th, and 6th grade of elementary school students, in April, 1996, Seoul, Korea. The 1342 data obtained were analyzed by Mean, t-test, ANOVA, duncan's Multiple Rang Test, Pearson correlation, and Regression. The major findings were as follows: 1) The average level of children's consciousness for the environmental conservation was relatively low, which was 1.79. There were significantly differences on the children's consciousness for the environmental conservation, according to student's grade level, housing type, parent's education, household income, and the level of consumer socialization. 2) The average level of children's behavior for the environmental conservation was low, which was 2.36. There significant differences on children's behavior of environmental conservation, according to student's sex, grade level, housing type, parent's education and occupation, household income, and consumer socialization. 3) There were significant relationships between children's consciousness and behavior for the environmental conservation. 4) The most influential variable for children's consciousness and behavior of the environmental conservation was consumer socialization. As we see above, this study concludes that consumer environmental education should be reinforced for the children in the home, so that they involved in the environmental activities and have an early experience.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.6
• /
• pp.44-52
• /
• 2007

Recently, oystershell wastes cause serious environmental problem and the need for the researches on the recycling of oystershell have been increased and various methods are already in operation. Field plate bearing tests and numerical analysis were performed to investigate the bearing capacity of oystershell filled geotextile gabion which utilized the waste oystershell at the coastal oyster farm site. The waste oystershell mixed soil specimens were prepared for the laboratory test and field test in terms of varying blending ratio of granite soil and oystershell. Based on the cyclic plate load test results, the spring constant, subgrade modulus of ground, and the reinforcing parameters were determined. The field plate load test results indicate that the bearing capacity of the soil ground with the oystershell mixed ratio of 20% is greater than that of the original ground. Two-dimensional numerical analysis was evaluated the expected deformation in the given conditions. Analysis results show a similar characteristics on bearing capacity with the results of the field plate load test. These findings suggest that the oystershells are very promising construction materials for landfill and earth embankment in coastal area.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.3 s.234
• /
• pp.387-394
• /
• 2005

Accurate predictions and simulations of the behavior of space structures based on analytical models become more important. In order to perform analysis to support the design of Ku-band transponder panel for the Communications and Broadcasting Satellite(CBS), mathematical models of the panel were generated in the form of finite element models. Test verification of these models is required before the transponder panel can be certified for launch environments. A modal identification was performed to obtain modal parameters which can be compared with the test results using correlation techniques. This paper approaches the sensor placement from the standpoint of the structural dynamicist who uses the modal parameter obtained during launch environmental test. The models were validated by performing a test-analysis correlation and updating analysis. It was proved that the Ku-band transponder panel satisfies the environmental test requirements.

• Journal of Applied Reliability
• /
• v.9 no.2
• /
• pp.81-91
• /
• 2009

This paper presents the comparison of climatic environmental tests of IEC Pub. 60068 and MIL-STD-810. Cold, dry heat, change of temperature, and heat-humidity cyclic tests are compared in terms of the types of tests and test severities. This study shows the difference between the standards, which will provide the useful information to the industries and be helpful in applying the standards.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.884-890
• /
• 2009

The bi-directional pile load test with variable end plate overcomes the shortcoming of the Osterberg cell test. It is possible that the ultimate bearing capacity of the bi-direction can be known by using the loading of the end plate and two step procedures. The first step is to confirming end bearing capacity with variable end plate and the second step is similar to the conventional O-cell test. In the study, To calculate ultimate capacity of bi-directional load test using model with the pile with variable end plate O-cell, operated with end plate of 3 type on sand layer according to the relative density, loose, medium and dense conditions.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.38-54
• /
• 1996

Respirator fit testing is required before entering specific work environmentals to ensure that the respirator worn satisfies a minimum of fit and that the user knows when the respirator fits properly. The fit of a respirator can be determined by qualitative (QLFT) or quantitative fit test (QNFT). The QNFT, having been universally accepted more than the QLFT, provide an objective and numerical basis by measuring a fit factor (FF). Until a few years age, only one QNFT technigue was available and accepted by U.S. Occupational Safety and Health Administration (OSHA) regulations. In the 1980's and 1990's, several new and fundamentally different QNFT methods were developed. Two of the newer methods are commercially availale and are accepted by OSHA as suitable alternatives. In this articles, the principle of operation of each ONFT technique is explained and each technique's major advantages and disadvantages are pointed out. Emphasis is given to negative-pressure air-purifying respirators, as they are in most frequent use today. The requirements and recommendations for fit testing positive-pressure respirators are discussed as well. Finally, the presently available QNFT standards and regulations are summarized to assist the user in making fit testing decisions.

• Proceedings of the Korea Environmental Mutagen Society Conference
• /
• 2003.10a
• /
• pp.133-133
• /
• 2003

• Journal of Korean Elementary Science Education
• /
• v.24 no.5
• /
• pp.495-503
• /
• 2005

The purpose of this study was to analyze elementary school students' attitudes through field-experience teaming activities program for the integrated textbook on the environment issues. This study was conducted after implementing the field environmental education for fifth graders with the teaching-teaming plan applied to the field education and was based on the analysis of environment-related education for the fifth graders. A total of 64 elementary students, 32 in the experimental group and 342 in the control group, were involved in this study. The study used the instrument consisting of 36 Likert-type questions on attitudes toward environment. After going over the influences of the field environmental education program on the students, we found out the positive development in the pre-test and post-test, concerning all environmental themes, especially in the field of protection of animals, environmental pollution, and environment in general.

• Journal of Korean Society on Water Environment
• /
• v.28 no.6
• /
• pp.943-953
• /
• 2012

Because of their unique properties, nano-sized metallic nanomaterials (NMs) have been used in extensive applications of biomedicine, electronics, optics, engineering, and personal care products. Accordingly, with the increasing release of NMs into the environment, numerous studies of nanoecotoxicity have been conducted. Fish embryo toxicity test (FET) has many benefits in evaluating toxicity of NMs as an alternative to a whole-body test in fish. In this study, we collected and analyzed the toxicity studies of metallic NMs on freshwater fish embryos. Most studies have demonstrated that metallic NMs are highly toxic during the early development of fish embryos. However, it should be noted that the results for the same NMs on the same test species show variation due to differences in the size or surface properties of the test NMs and exposure conditions. For the safe use of metallic NMs, we need to analyze their effects based on their properties, test species, environmental media, and diverse conditions.