• Journal of Korean Medicine Rehabilitation
• /
• v.32 no.3
• /
• pp.13-27
• /
• 2022

Objectives This study investigated the trends in domestic and international clinical research in craniosacral therapy, classified as a type of Chuna manual therapy, and suggested further directions in Korean medicine. Methods This scoping review was performed using the Arksey and O'Malley methodological framework and preferred reporting items as per the preferred reporting items for systematic reviews and meta-analyses extension for scoping reviews checklist. Eight electronic databases (PubMed, EMBASE, Cochrane Library, Koreanstudies Information Service System [KISS], KMBASE, Oriental Medicine Advanced Searching Integrated System [OASIS], Research Information Sharing Service [RISS], ScienceON) were searched to identify articles with the search terms "craniosacral therapy" and "cranial osteopathy" until December 2021. Results Forty-five studies were eligible as per our inclusion criteria. Most research studies (n=44) were conducted in the field of medicine and pharmacy, especially in rehabilitation medicine (n=16). As a result of the study design, randomized controlled trials (n=20) were the most common, and chronic pain (n=9) was the most frequently targeted disease, followed by headache (n=7). Thirty-two studies suggested interventions and 20 studies used Upledger's 10-step protocol. The average duration of craniosacral therapy was 41 min per session, administered 1.4 times per week. Outcome measurements were analyzed and categorized with the examination procedure for the patient. Conclusions This is the first scoping review of craniosacral therapy in Korea, and we believe that our findings could support its utility as Chuna. In the future, more studies should be conducted to establish the evidence of clinical efficacy of craniosacral therapy and develop standard techniques in Korean medicine.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.4
• /
• pp.236-244
• /
• 2024

A representative problem in domestic chestnut industry is the high loss of flesh due to excessive knife peeling in order to increase the peeling rate, resulting in a decrease in production efficiency. In this study, a prediction model for weight loss rate of chestnut by stage of knife peeling process was developed as undergarment study to optimize conditions of the machine. 51 control conditions of the two-stage blade peeler used in the experiment were derived and repeated three times to obtain a total of 153 data. Machine learning(ML) models including artificial neural network (ANN) and random forest (RF) were implemented to predict the weight loss rate by chestnut peel stage (after 1st peeling, 2nd peeling, and after final discharge). The performance of the models were evaluated by calculating the values of coefficient of determination (R), normalized root mean square error (nRMSE), and mean absolute error (MAE). After all peeling stages, RF model have better prediction accuracy with higher R values and low prediction error with lower nRMSE and MAE values, compared to ANN model. The final selected RF prediction model showed excellent performance with insignificant error between the experimental and predicted values. As a result, the proposed model can be useful to set optimum condition of knife peeling for the purpose of minimizing the weight loss of domestic chestnut flesh with maximizing peeling rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.464-469
• /
• 2019

A remote monitoring panel and control system was developed to control various valves and access control chambers, including gas shutoff valves used in CBR(Chemical, Biological and Radiological) facilities. The remote monitoring panel consisted of a main panel installed in the NBC (Nuclear, Biological and Chemical) control room and auxiliary panel installed in the clean room, and the size was divided into pure control and control including CCTV. This system can be monitored and controlled remotely according to the situation where an explosion door and gas barrier door can occur during war and during normal times. This system is divided into normal mode and war mode. In particular, it periodically senses the operation status of various valves, sensors, and filters in the CBR facilities to determine if each apparatus and equipment is in normal operation, and remotely alerts situation workers when repair or replacement is necessary. Damage due to the abnormal operation of each device in the situation can be prevented. This enables control of the blower, supply and exhaust damper, emergency generator, and coolant pump according to the state of shutoff valve and positive pressure valve in the occurrence of NBC, and prevents damage caused by abrupt inflow of conventional weapons and nuclear explosions.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.3
• /
• pp.325-340
• /
• 2008

The purpose of this study was to evaluate the artificial dental plaque by Streptococcus mutans on 4 different implant surfaces. In this study, the specimens were divided into 4 groups according to implant surface treatment. Uncoated implant group(n=5) which has an uncoated, smooth surfaced implant(Osstem, Korea), SLA implant group(n=5) which has an sandblasted large grit and acid-etched surface implant(Bicon, USA). Oxidized implant group(n=5) which has an oxidized surfaced implant (Osstem, Korea), and RBM implant group(n=5) which has resorbable blasting media(RBM) surfaced implant(Osstem, Korea). Acquired pellicle by human saliva and dental plaque by Streptococcus mutans were made on each implant surface. To analyze the plaque condition on implants surfaces, cell count and optical density were taken as a microbiologic method, and SEM(Scanning Electronic Microscope) findings was also taken for evaluation of surface condition. The following results were obtained. 1. Cell counting results of artificial dental plaque were Uncoated group($658.0{\pm}102.0$), RBM group($878.0{\pm}170.0$), SLA group ($946.0{\pm}42.0$), Oxidized group($992.0{\pm}40.0$), and there was difference between Oxidized group and Uncoated implant group(p<0.05). In case of modified cell counting results by v/w% were RBM group($197.8{\pm}45.2$), Oxidized group($207.04{\pm}8.34$), Uncoated group($261.6{\pm}40.6$), SLA group($315.4{\pm}14.0$), and there was difference between RBM group and SLA group(p<0.05). 2. Optical density results of artificial dental plaque after ultrasonic treatment was that there was difference among groups, and optical density of RBM group was higher than that of Uncoated group(p<0.05). In case of modified optical density results by v/w%, there was difference among groups, and the modified optical density of Uncoated group and SLA group was higher than those of Oxidized group and RBM group(P>0.05). 3. SEM findings of artificial dental plaque on the surfaces of implant as follows; there were artificial dental plaque on the surfaces of all test implants. Streptococcus mutans and by-product were observed at 10,000 times magnified condition on all test implants. Adhesion area of artificial dental plaque was about 1/2 of total surface after 24 hours incubate at $37^{\circ}C$. These results showed that there were differences among implant surfaces on the growth of Streptococcus mutans, and bacteria and by-product were covered about 1/2 area of total implant surfaces at 24 hours incubate at $37^{\circ}C$.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.8
• /
• pp.3403-3410
• /
• 2014

Context: Interest exits in whether TNF-alpha antagonists increase the risk of breast cancer and total malignancies in patients with rheumatoid arthritis (RA). Objectives: To analyze the risk of malignancies, especially breast cancer, in patients with RA enrolled in randomized control trials (RCTs). Methods: A systematic literature search for RCTs from 1 January 1998 to 1 July 2013 from online databases, such as PubMed, WILEY, EMBASE, ISI web of knowledge and Cochrane Library was conducted. Studies included RCTs that compared the safety of at least one dose of the five TNF-${\alpha}$ antagonists with placebo or methotrexate (MTX) (or TNF-${\alpha}$ antagonists plus MTX vs placebo plus MTX) in RA patients for more than 24 weeks and imported all the references into document management software EndNote${\times}6$. Two independent reviewers selected studies and extracted the data about study design, patients' characteristics and the type, number of all malignancies. Results: 28 RCTs from 34 records with 11,741 patients were analyzed. Of the total, 97 developed at least one malignancy during the double-blind trials, and breast cancer was observed in 17 patients (17.5% of total malignancies). However, there was no statistically significant increased risk observed in either the per protocol (PP) model (OR 0.65, 95%CI [0.22, 1.93]) or the modified intention to treat (mITT) model (OR 0.75, 95%CI [0.25, 2.21]). There were also no significant trend for increased risk of total malignancies on anti-TNF-${\alpha}$ therapy administered at approved doses in either model (OR, 1.06, 95%CI [0.64, 1.75], and OR, 1.30, 95%CI [0.80, 2.14], respectively). As to the two models, modified intention to treat model analysis led to higher estimation than per protocol model analysis. Conclusions: This study did not find a significantly increased risk of breast cancer and total malignancies in adults RA patients treated with TNF-${\alpha}$ antagonists at approved doses. However, it cannot be ignored that more patients developed malignancies with TNF-${\alpha}$ antagonists therapy compared with patients with placebo or MTX, in spite of the lack of statistical significance, so that more strict clinical trials and long-term follow-up are needed, and both mITT and PP analyses should be used in such safety analyses.

• Science of Emotion and Sensibility
• /
• v.26 no.1
• /
• pp.79-86
• /
• 2023

This study aims to create a highly conductive E-textile made by recycling PET with a Dip-coating process. PET fiber with hydrophobic properties is characterized by the difficulty in imparting great conductivity when both Virgin and Recycled are made of electronic fibers through a Dip-coating process. To advance the effectiveness of the Dip-coating process, a sample made of recycled PET was surface modified for 50 w 5 minutes and 10 minutes employing a Covance-2mprfq model from FEMTO SCIENCE. After that, the sample was immersed in an SWCNT dispersion (.1 wt%, Carbon Co., Ltd.) for 5 minutes, and then dip coating was conducted to allow the solution to permeate well into the sample through a padder (DAELIM lab). After the procedure was completed, the resistance measurement was measured with a multimeter at both ends and then accurately remeasured with a wider electrode. As a result of this contemplation, it was affirmed that great conductivity might be given through an impregnation process through the plasma surface modification. When the surface modification was performed for 10 minutes, the resistance was reduced by up to 2.880 times. Dependent on the results of this research, E-fibers employed in the smart wearable sector can also be made of recycled materials, improving smart wearable products that can save oil resources and reduce carbon emissions.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.102-108
• /
• 2008

We have studied the properties of Ag/undoped ZnO (ZnO) multilayer thin films deposited on glass substrate by the facing targets sputtering method. In an attempt to find out the optimum conditions of the Ag thin film, which would be coated on the ZnO thin film, we investigated the changes of sheet resistance, transmittance and surface morphology as a function of deposition times and the substrate temperature. The electrical and optical characteristics of Ag/ZnO multilayers were evaluated by a four-point probe, a UV/VIS spectrometer with a spectral range of 390-770 nm, a X-ray Diffractometer (XRD), an atomic force microscope (AFM) and a Field Emission Scanning Electron Microscope (SEM), respectively. We were able to prepare the Ag/ZnO multilayer thin film with sheet resistance of 9.25 $\Omega/sq.$ and transmittance of over 80% at 550nm.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.65-70
• /
• 2021

In this study, interfacial properties and mechanical properties of joints were reported after Cu pads finished with organic solderability preservative (OSP) on flame retardant-4 (FR-4) printed circuit board (PCB) and electronic components were joined with a Sn-57Bi-1Ag solder paste by using a laser bonding process. The laser bonding process was performed under various bonding conditions with changing a laser power and a bonding time and effects of bonding conditions on interfacial and mechanical properties of joints were analyzed. In order to apply for industry, properties of bonding joints using a reflow bonding process which are widely used were compared. When the laser bonding process were performed, we observed that Cu₆Sn₅ intermetallic compounds (IMCs) were fully formed at the interface although the bonding times were very short about 2 and 3 s. Furthermore, void formations of the joints by using the laser bonding process were suppressed at the joints with comparing to the reflow bonding process and shear strengths of bonding joints were higher than that by using the reflow bonding process. Therefore, in spite of a very short bonding time, it is expected that joints will be stably formed and have a high mechanical strength by using the laser bonding process.

• Journal of Environmental Health Sciences
• /
• v.21 no.3
• /
• pp.38-47
• /
• 1995

The Bioconcentration factor (BCF) is used as an important criterion in the risk assessment of environmental contaminants. Also it can be used as indicator of biomagnification of environmentally hazardous chemicals through food-chain as well as a tool for ranking the bioconcentration potential of the chemicals in the environment. This paper reports the measured BCF value on Chlorothalonil in Carassius auratus(goldfish), under steady state, and examined correlation between the BCF value and the partition coefficient or acute toxicity or physicochemical properties. Carassius auratus(goldfish) was chosen as test organism and test period were 3-day, 5-day. Experimental concentrations were 0.005, 0.01 and 0.05 ppm. Chlorothalonil in fish tissue and in test water were extracted with n-hexane and acetonitrile. GC-ECD was used to detecting and quantitating of Chlorothalonil. Partition coefficient was determined by stir-flask method. $LC_{50}$ was determined on Chlorothalonil. Carbaryl and BPMC. The obtained results were as follows. 1. It was possible to determine short term BCFs of Chlorothalonil through relatively simple procedure in environmental concentrations. 2. $BF_3$ of Chlorothalonil in concentration of 0.005, 0.01 and 0.05 ppm were 2.1866$\pm$0.23446, 3.5269$\pm$0.23517, 10.2045$\pm$0.18053 and BCFs were 6.6543$\pm$0.55257, 6.9774$\pm$0.02500, 23.4576$\pm$2.06884, respectively. 3. Chlorothalonil concentration in fish extract and BCFs of Chlorothalonil were increased as increasing test concentration and prolonging test period. 4. Fate of test-water concentration on Chlorothalonil was greater than that of control-water con-centration. It is considered that greater fate of test-water concentration on Chlorothalonil is due to hydrolyzing nitrile group under the mild condition and substituting chloro group by some aromatic compounds in test water. 5. Determined logP of Chlorothalonil was 2.80. And determined $LC_{50}$ of Chlorothalonil in time of 24, 48, 72 and 96 hr were 0.1684, 0.1402, 0.1400, 0.1352(mg/l) respectively. And $LC_{50}$ of Carbaryl in above times were 19.918, 18.635, 18.466, 18.12(mg/l) respectively. $LC_{50}$ of BPMC were 10.248, 9.166, 9.087, 8.921(mg/l) respectively. 6. It is suggested that the BCF of Carbamates depend on partition coefficients. But BCF of Chlorothalonil, organochlorine pesticide, would be strongly influenced by steric, electronic effect of substituents than partition coefficient.

• The Korea Journal of Herbology
• /
• v.25 no.3
• /
• pp.149-157
• /
• 2010

Objective：Gagam-Gongjin-dan (GGD) is an oriental medicinal prescription composited with Cervi parvum Cornu, Corni Fructus, Angelica Gigantis Radix, Lycii Fructus, Dioscoreae Rhizoma, Citri Pericarpium, Gastrodiae Rihzoma, Agastachis Herba, Cassiae cortex, Scutellariae Radix and Schisandrae Fructus. The purpose of this study was to investigate the effects of GGD extract against acetaminophen (APAP)-induced liver injury in mice. Methods：GGD extract was prepared by extracting with methanol for 7 days. The extract was freeze-dried following filtration through vacuum distillation system. The first, we investigated the antioxidant effects of GGD extract on electronic donating ability (DPPH), nitrite (NO) scavenging and superoxide dismutase (SOD)-like activity. The next, we investigated the possible hepatoprotective effect of GGD extract administration against acetaminophen-induced liver injury in mice. Mice were orally administrated with or without GGD extract of different doses (25-100 mg/kg/day) one times per day for 6 days. After 3 days, APAP was orally applied with a single dose (400 mg/kg). Results：GGD extract increased DPPH, NO and SOD-like activities in dose dependant. APAP treatment significantly increased aspartate aminotransferase (AST) and alanine aminotransferase (ALT) activities in plasma. Also, APAP treatment significantly evaluated lipid peroxidation product thiobarbituric reacting substances (TBARS) and depleted some antioxidant enzymes (superoxide dismutase, catalase, d-aminolevulinate dehydratase and gluthathione peroxidase activities) in liver homogenates compared to the control group. However, the orally administration of GGD extract was able to counteract these effects. Histological studies provided supportive evidence for biochemical analysis Conclusions：These results suggest that GGD extract has a potential antioxidant and hepatoprotective effect against APAP-induced liver injury, these properties may contribute to liver disease care.