• Journal of the Optical Society of Korea
• /
• 제2권1호
• /
• pp.34-37
• /
• 1998

We present a novel method for the stabilization of the Sagnac current sensor with active twist control. The sensor output was improved more than 8 times by employing the proposed stabilization method. Stability within $\pm$1.7% was demonstrated between 36$^{\circ}C$ and 62$^{\circ}C$.

• 한국전자파학회논문지
• /
• 제18권2호
• /
• pp.158-165
• /
• 2007

본 논문은 X-band에서 동작하는 마이크로스트립 원형 편파 $4{\times}4$ 배열 안테나의 설계와 제작에 대해 다룬다. 단일 안테나는 정사각형 패치를 사용하고 비대칭 십자 개구 결합 급전 구조를 사용하여 RHCP(Right Handed Crcularly Polarization)로 동작하도록 하였다. 기존의 배열 안테나의 소자간의 간격을 0.8 ${\lambda}_0$에서 0.45 ${\lambda}_0$로 간격을 줄여 실장 면적을 감소시켰다. 급전 선로는 시퀀셜 로테이션 분배기로 $2{\times}2$ 배열 안테나를 설계하여 양호한 이득과 축비 대역폭을 나타내었다 ${\lambda}/4$ Transformer와 T-junction 전력 분배기로 $4{\times}4$ 배열 안테나로 확장하였다. 시뮬레이션으로 확인한 결과 최대 방사 이득은 15.09 dBi로 나타났으며, 축비 대역폭은 3 dB 기준 $9.05{\sim}10.4$ GHz(13.5%)의 양호한 특성을 보였다. 제작된 $4{\times}4$배열 안테나는 10 GHz에서 측정 결과 임피던스 대역폭($VSWR{\leq}2$)은 $8.45{\sim}11.84$ GHz(33.9%)로 나타났으며, 최대방사 이득은 11.10 dBi를 얻었다. 또한 측정된 축비 대역폭은 $9.42{\sim}10.47$ GHz(10.5%)를 얻었다.

• 한국정보통신학회논문지
• /
• 제18권8호
• /
• pp.1914-1924
• /
• 2014

본 논문에서는 행의 개수가 열의 개수보다 작은 4행 ${\times}$ 8열의 셀 어레이를 갖는 eFuse OTP IP 설계에서 eFuse의 프로그램 전류를 공급하는 SL 구동 라인을 열 방향으로 라우팅 하는 대신 행 방향으로 라우팅 하므로 레이아웃 면적을 많이 차지하는 SL 구동회로 수를 8개에서 4개로 줄이는 셀 어레이 방식과 코어 회로를 제안하였다. 제안된 셀 어레이 방식과 코어 회로는 32비트 eFuse OTP IP의 레이아웃 면적을 줄였다. 그리고 큰 read 전류에 의해 blowing 되지 않은 eFuse가 EM 현상에 의해 blowing되는 현상을 방지하기 위하여 RWL 구동회로와 BL 풀-업 부하회로에 필요한 V2V($=2V{\pm}10%$) 레귤레이터를 설계하였다. 설계된 4행 ${\times}$ 8열의 32비트 eFuse OTP IP의 레이아웃 면적은 $120.1{\mu}m{\times}127.51{\mu}m$ ($=0.01531mm^2$)로 기존의 eFuse OTP IP의 면적인 $187.065{\mu}m{\times}94.525{\mu}m$ ($=0.01768mm^2$)보다 13.4% 더 작은 것을 확인하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제10권3호
• /
• pp.89-92
• /
• 2009

High-quality Al-N doped p-type ZnO thin films were deposited on Si and buffer layer/Si by DC magnetron sputtering in a mixture of $N_2$ and $O_2$ gas. The target was ceramic ZnO mixed with $Al_2O_3$ (2 wt%). The p-type ZnO thin films showed a carrier concentration in the range of $1.5{\times}10^{15}{\sim}2.93{\times}10^{17}\;cm^{-3}$, resistivity in the range of 131.2${\sim}$2.864 ${\Omega}cm$, mobility in the range of 3.99${\sim}$31.6 $cm^2V^{-1}s^{-l}$, respectively. It was easier to dope p-type ZnO films on Si substrates than on buffer layer/Si. The film grown on Si showed the highest quality of photoluminescence (PL) characteristics. The Al donor energy level depth $(E_d)$ of Al-N codoped ZnO films was reduced to about 50 meV, and the N acceptor energy level depth $(E_a)$ was reduced to 63 meV.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.417-418
• /
• 2008

Transparent conductive oxide (TCO) are necessary as front electrode or anti-reflecting coating for increasing efficiency of LED and Photodiode. In this paper, aluminum-doped Zinc oxide films(AZO) were prepared by DC magnetron sputtering on glass(corning 1737) and Si substrate at temperature of $100^{\circ}C$ and then annealed at temperature of $400^{\circ}C$ for 1hr in Ar and vaccum. The AZO films were etched in diluted HCL (0.5 %) to examine the surface morphology properties. After annealing, Structural and electrical property were investigated. The c-axis orientation along (002) plane was enhanced and the electrical resistivity of the AZO film decreased from $1.1\times10^{-1}$ to $1.6\times10^{-2}{\Omega}cm$. We observed textured structure of AZO thin film etched for 2s.

• 한국광학회지
• /
• 제16권3호
• /
• pp.287-294
• /
• 2005

본 논문에서는 크로스(CROSS) 포트에 광섬유 지연선로가 연결된 $2\times2$ 광 스위치들로 구성된 광섬유 지연선로 행렬과 다파장 광원을 이용한 2차원 위상 배열 안테나(Phased Array Antenna; PAA)용 광 실시간 지연선로(True Time-Delay ; TTD)의 구조를 제안하였고, 파장 의존형 광 TTD와 파장 비의존형 광 TTD를 결합하여 10-GHz 2차원 PAA용 2-비트$\times$4-비트 광 TTD를 제작하였다. 단위 시간 지연 차이가 각각 ${\Delta}T=12ps$와 $\Delta\tau=6ps$인 파장 의존형 광 TTD와 파장 비의존형 광 TTD의 모든 주사각에 대해서 시간지연을 측정하였다. 파장 의존형 광 TTD의 시간 지연 오차는 지터에 의해 최대 2.8 ps가 발생하였으며, 파장 비의존형 광 TTD의 경우에는 ${\pm}0.8ps$이하의 오차가 나타났다. 제안된 2차원 PAA용 광 TTD의 구조는 1차원 선형 PAA보다 높은 이득을 얻을 수 있고, 다파장 광원을 사용하므로 광 파워 및 파장의 안정성을 확보할 수 있으며, 전기적 스위치 제어기를 이용하여 $2\times2$ 광 스위치 행렬을 열(column) 단위로 절체하기 때문에 주사 빔 제어 속도가 빠르고 구동이 간단한 장점을 갖고 있다.

• Journal of Biosystems Engineering
• /
• 제27권3호
• /
• pp.241-248
• /
• 2002

An electronic noses system including six metal oxide sensors was used to predict the characteristics of shelf-life of soybean curd. Soybean curd was stored at two different temperatures defined as low temperature(5$\^{C}$) and high temperature(25$\^{C}$). Resistance changes of the sensors were measured 13 times for 19 days at low temperature and 19 times for 120 hours at high temperature. Three different analytical methods such as graphical analysis(GA), principal component analysis(PCA), and cluster analysis(CA) were used to analyze sensors outputs. The ratio of resistance was decreased according to increasement of shelf-life. Using PCA it was possible to predict freshness and shelf-life time of soybean curds. Also, using CA it was possible to simplify an electronic nose system. Electronic nose system could be an efficient method to predict shelf-life and to evaluate quality in foods.

• Transactions on Electrical and Electronic Materials
• /
• 제14권5호
• /
• pp.278-281
• /
• 2013

The effects of electric field frequency on the AC electrical treeing phenomena in an epoxy/layered silicate (1.5 wt%) were investigated in a needle-plate electrode arrangement. A layered silicate was exfoliated in an epoxy-base resin with AC electric field apparatus. To measure the treeing initiation and propagation- and the breakdown rate, a constant alternating current (AC) of 10 kV with three different electric field frequencies (60, 500, and 1,000 Hz) was applied to the specimen in the needle-plate electrode specimen in an insulating oil bath at $130^{\circ}C$. At 60 Hz, the treeing initiation time was 12 min, the propagation rate was $0.24{\times}10^{-3}$ mm/min, and the morphology was a dense branch type. As the electric field frequency increased, the treeing initiation time decreased and the propagation rate increased. At 1,000 Hz, the treeing initiation time was 5 min, the propagation rate was $0.30{\times}10^{-3}$ mm/min, and the morphology was a dense bush type.

• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.77-80
• /
• 2014

The effect of reactive diluents on the ac electrical treeing in epoxy/nanosilicate systems was studied, in a needle-plate electrode geometry. Diglycidyl ether of bisphenol A (DGEBA) type epoxy was used as a base resin, and layered silicate was used as a nano-sized filler. Polyglycol (PG) or 1,4-butanediol diglycidyl ether (BDGE) was introduced as a reactive diluent to the DGEBA/nanosilicate system, in order to decrease the viscosity of the nanocomposite system. PG acted as a flexibilizer, and BDGE acted as a chain extender, after the curing reaction. To measure the treeing propagation rate, a constant alternating current (ac) of 10 kV/4.2 mm (60 Hz) was applied to the specimen, in a needle-plate electrode arrangement, at $30^{\circ}C$ of insulating oil bath. When 10 kV/4.2 mm (60 Hz) was applied, the treeing propagate rate in the DGEBA system was $1.10{\times}10^{-3}$ mm/min, and that in the DGEBA/PG system was $1.05{\times}10^{-3}$ mm/min. As 1.5 wt% of nanosilicate was added to the DGEGA/PG system, the propagation rate was $0.33{\times}10^{-3}$ mm/min. This meant that the nano-sized layered silicates would act as good barriers to treeing propagation. The effect of chlorine content was also studied, and it was found that chlorine had a bad effect on the electrical insulation property of the epoxy system.

• Journal of electromagnetic engineering and science
• /
• 제15권1호
• /
• pp.20-25
• /
• 2015

A circularly rotated array for a dual polarized applicator in a superficial hyperthermia system is proposed. The applicator has a wider effective treatment area due to the $180^{\circ}$ phase shift. The dual polarized circularly rotated array (DPCRA) suppresses overheating at the center of the array and helps evenly distribute the heat. This array provides a more effective treatment area than a lattice array when a $2{\times}2$ dual polarized array is fitted to the treatment area. The treatment area is 71.5% of the aperture, whereas the effective treatment areas of the $2{\times}2$ dual polarized lattice array (DPLA) and the single polarized array (SPA) are 57.2% and 38.6% of the same aperture, respectively. The measurement matches the simulation results without blood circulation effects. In a $2{\times}2$ array applicator, the proposed DPCRA has more heat uniformity than the DLA and the SPA.