• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1120-1131
• /
• 2006

This paper describes the numerical analysis techniques using the Combined Integration/Matrix Method to calculate ground potential rise which can be occurred in the various grounding systems. Combined Integration/Matrix Method is used to reduce the error and computation time with the analytical integration equation and the proper segmentaion of earth embedded conductor. To do it, optimal segmentaion method for the buried conductors is presented through error analysis which is capable of applying the practical scaled various grounding systems. The optimum length of segmented element is much co-related with the buried depth of grounding electrode and the maximum length of buried electrode. As a result, less 3 precent errors was obtained by proposed model. The proposed model is applied to verify an effect of multi-grounding problems which was aroused much controversy with separated or common grounding between the high power grounding system and low power grounding system such as signal and telecommunication grounding.

• Journal of Welding and Joining
• /
• v.11 no.3
• /
• pp.34-47
• /
• 1993

Finite element models were developed for thermal and residual stress analysis for the specific welding problems. They were used to evaluate the effectiveness of the various welding heat input models, such as ramp heat input function and lumped pass models. Through the parametric studies, thermal-mechanical modeling sensitivity to the ramp function and lumping techniques was determined by comparing the predicted results with experimental data. The kinetics for residual stress formation during welding can be developed by iteration of various proposed mechanisms in the parametric study. A ramp heat input function was developed to gradually apply the heat flux with variable amplitude to the model. This model was used to avoid numerical convergence problems due to an instantaneous increase in temperature near the fusion zone. Additionally, it enables the model to include the effect of a moving arc in a two-dimensional plane. The ramp function takes into account the variation in the out of plane energy flow in a 2-D model as the arc approaches, travels across, and departs from each plane under investigation. A lumped pass model was developed to reduce the computation cost in the analysis of multipass welds. Several weld passes were assumed as one lumped pass in this model. Recommendations were provided about ramp lumping techniques and the optimum number of weld passes that can be combined into a single thermal input.

• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.82-87
• /
• 2016

The ventilation system for the efficient operation of the building services systems in the ventilation plan of super high-rise buildings is used to combine smoke control systems. This study evaluated models of super high-rise buildings with four basement levels and 59 stories and investigated the pressure distribution of each floor by the smoke driving forces by numerical analysis. The smoke driving forces on the building of analytical model was analyzed to determine the effects of the ventilation plan and smoke control plane. In addition, when a combination with ventilation and smoke control of the kitchen ventilation damper in the ventilation plan of analysis model building was designed based on the these results, the relationship between the opening and closing force of the damper and smoke driving combined forces to act on the design pressure of the damper by a motion analysis simulation. The driving units of the damper were selected from the analytical results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.205-212
• /
• 2021

In this study, two types of thrust stand modeling were proposed for the design of a thrust stand using flexure. Type A model generate combined load for tangential (thrust) and axial compressive load (self weight). And type B generate combined load for tangential and axial tensile load. The research was done by comparing the influence of the load between the models through a 1D calculation and computational analysis. The 1D calculated value and the computational analysis value were compared for a total of 10 sections and the results were confirmed to be very similar. In order to prove the validity of the analysis results, the equivalent stress was confirmed from the computational analysis of the flexure, and the production of the Type B model was selected from the evaluation of the yield condition (Von-Mises Yield Criterion).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1473-1479
• /
• 2009

This study have been carried out as a part of R&D project to develop a low cost high efficiency combined grain drying & storage system. The design of sweeping auger must meet the various conditions : capacity and dimensions of silo, discharging capacity of auger, operation conditions of auger such as revolution and rotation and density of grains and even the first-in & first-out of grains in the system. Through the experimental observations with the apparatus which enables the direct observation of discharging behavior of grains, the limitations of the performance of existing straight type auger was observed. Generalized mathematical model for the profile of new variable section sweeping auger was obtained, which ensures the uniform descending of grains and also meets various operating conditions. The experimental results with a prototype sweeping auger showed that the mathematical model for the variable section sweeping auger was quitely correct.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2023.04a
• /
• pp.179-179
• /
• 2023

• Korean Journal of Social Welfare Studies
• /
• v.41 no.3
• /
• pp.185-212
• /
• 2010

This study simulates the effects of basic income on income redistribution in Korea, and compares the redistribution effects of basic income models with the effect of the current welfare system. Using the Korea Welfare Panel Study(2008), absolute/relative poverty rate, poverty gap ratio, gini coefficients are measured. As a result of simulation, the basic income models reduced poverty more effectively than the current system. And among the three basic income models, the basic income model combined with flat-rate tax reduced poverty more effectively. And the basic income model combined with progressive tax reduced inequality more effectively. The results of the study reported in this paper confirm the paradox of redistribution which suggest that the effect of universal welfare program on redistribution is the most noticeable.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.232-232
• /
• 2022

We reported in our recent studies that the combined treatment of Paenibacillus yonginensis DCY84^T (DCY84^T) and Silicon (Si) promotes initial plant growth and increases resistance to biotic and abiotic stress. To understand the molecular background of these phenotypes, Liquid Chromatography Mass Spectrometry (LC-MS) analysis was performed, and it was confirmed that unsaturated fatty acid metabolites such as oleic acid and linoleic acid decreased in response to the combined treatment of DCY84^T and Si. The stearoyl-acyl carrier protein desaturase (SACPD) introduces the cis double bond into the acyl-ACPs at C9, resulting in the production of unsaturated fatty acid. We identified OsSSI2 encoding SACPD in rice and found that the expression of OsSSI2 was reduced under DCY84^T and Si treatment. Furthermore, qRT-PCR analysis revealed that the expression of OsWRKY45, which is downstream of OsSSI2, was upregulated in response to DCY84^T and Si treatment. These results enable the speculation that activation of the salicylic acid (SA)-responsive gene, OsWRKY45, may contribute to enhancing biological stress resistance. Based on this, we propose a probable model for the rice defense pathway following DCY84^T and Si treatment. This model retains a WRKY45-dependent but NH1(NPR1)-independent SA signaling pathway.

• Journal of the Korean Society for Library and Information Science
• /
• v.42 no.4
• /
• pp.159-179
• /
• 2008

This study aims at discussing development of web archiving policies in South Korea. The study is based on the understanding of that the institutional environment and efforts for keeping Web information resources are insufficient, compared to the value and importance of them. For the study, Web archiving practices are analyzed into three aspects: scope, method, and quality. Futhermore, they are graphically schematized as a comparative analysis model. Based on the model, the study classifies national Web archiving practices into seven unique types and diagnoses their cons and pros. In this context, a combined Web archiving policy is discussed as an optimal Web archiving approach. As a case study, the France National Library's Web archiving is discussed in depth and the Korean National Library's Web archiving project, OASIS, is critically analyzed. As a result, the study proposes two alternative plans for the development of Web archiving policy in South Korea.

• Journal of Preventive Medicine and Public Health
• /
• v.45 no.1
• /
• pp.14-20
• /
• 2012

Objectives: The aim of this study was to evaluate and quantify the risk of both individual and combined health behaviors on premature mortality in middle aged men in Korea. Methods: In total, 14 533 male subjects 40 to 59 years of age were recruited. At enrollment, subjects completed a baseline questionnaire, which included information about socio-demographic factors, past medical history, and life style. During the follow-up period from 1993 to 2008, we identified 990 all-cause premature deaths using national death certificates. A Cox proportional hazard regression model was used to estimate the hazard ratio (HR) of each health risk behavior, which included smoking, drinking, physical inactivity, and lack of sleep hours. Using the Cox model, each health behavior was assigned a risk score proportional to its regression coefficient value. Health risk scores were calculated for each patient and the HR of all-cause premature mortality was calculated according to risk score. Results: Current smoking and drinking, high body mass index, less sleep hours, and less education were significantly associated with all-cause premature mortality, while regular exercise was associated with a reduced risk. When combined by health risk score, there was a strong trend for increased mortality risk with increased score (p-trend < 0.01). When compared with the 1-9 score group, HRs of the 10-19 and 20-28 score groups were 2.58 (95% confidence intervals [CIs], 2.19 to 3.03) and 7.09 (95% CIs, 5.21 to 9.66), respectively. Conclusions: Modifiable risk factors, such as smoking, drinking, and regular exercise, have considerable impact on premature mortality and should be assessed in combination.