• Journal of Korean Society of Forest Science
• /
• 제36권1호
• /
• pp.38-46
• /
• 1977

The purpose of this study are to analyze economic and psychological factors associated with the forest protection of the mountain people, and to explain the forms of the forest management by ownership classes, especially with forest in the production structure of the mountain villages, particulary from Aprial 1st to 20th in 1975. And the basis of the data for this study is to have been obtained by the sample of 462 households, in Jeonbuk province, which were selected by the method of Yandom sampling. In order to determine what relations there are between the forest ownership classes are independent and each of the selected economic and psychological factors, the chi-squre test was used. The findings may be summarized as follows; 1. The area per household forest land of the mountain villages farm families with forest was 1.4ha and are middle classes with the cultivated area, and manage their forest in favor of the forest fuel and the byproducts, which we call "Earn Ownership Management Form". As it is acomplished by the agricultural surplus labor, we can't expect the positive forest investments. 2. The expectation of the proceeds of forest investments seems to be high but 30% of them doubtful. And the mountain villages farm families with above 3ha forest area expect their forest investments to be positive and in future they have hope in the economic management from. 3. The mountainous mountain fram families reply to a small sums of capital and the control of after the fact on account of the negative factors of forest investment. But rural mountain villages farm famillies assist on spending too much money for the control and nexious insects damage. 4. The reason about illegal cut away was mainly their fuels problem and then most of moumtain farm villages was used to forest fuel in their fuel. But 57% of mountainous mountain villages farm families not having forest area, and 66% of them get their fual on the self-supply, and 66.9% of them get from public and nationat forest and other's forest. That is one of the big problems of the forest protection. 5. Above 66% of mountain people think that forest law is severe and 50% of mountainous mountain villages farm families think if usual. Especially ones not having forest area but taking advantage of forest among them think so. 6. Rural mountain villages farm families have comparatively positive attitude for protecting forest, but mountainous mountain villages farm families negative. Classes with above 3ha forest area have more outlook of forest protection. And the more such classes are, the better they can protect forest. 7. There are problem about operation and education of the forest law on the mountainous mountain villages farm families.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제14권2호
• /
• pp.97-112
• /
• 1978

The rule 15, 16 and 17 of International Regulations for Preventing collisions at Sea direct actions to avoid collision when two power-driven vessels are crossing. But these rules do not present the safety minimum approaching distances outside which a give- way vessel deeps out of the way of a stand-on vessel. In this paper, the author analyzed the ship's collision avoiding actions from a viewpoint of ship kinematics as the method to calculate this distance. The author worked out mathematic formulas for calculating the safety minimum approaching distances outside which the give-way vessel takes the actions to avoid collisions in accordance with the cross angles of the crossing vessels' courses. Figuring out actually the values of maneuvering indices of the M. S. Koan Ack San (GT: 224tons), the training ship of the National Fisheries University of Busan and the M. S. Golden Clover (GT: 101, 235tons) of the Eastern Shipping Co., Ltd. through their Z test, the author applied these values to the calculating formulas and calculated the safety minimum approaching distances. The results of calculations are as follows; 1. The greatest distance is to be kept by the give-way vessel to avoid collision when the cross angle of courses is 90$^{\circ}$ or near it. In such case the safety minimum approaching distance of a small vessel must be more than 5 times of her own length and that of a large vessel more than 11 times of her own length. 2. Collision danger is greater when crossing angle is obtuse than in an acute angle, therefore greater distance is to be kept by the give-way vessel to avoid collision in the case of the obtuse angle. 3. The actions to be taken to avoid collisions by the give-way vessel in Rule 16 and by the stand-on vessel in Rule 17(a)(ii) of International Regulations for Preventing Collisions at Sea, must be done outside the above safety minimum approaching distance. When inevitably such actions are to be taken within the safety minimum approaching distance, they should be accompanied with engine motions.

• Journal of Intelligence and Information Systems
• /
• 제19권3호
• /
• pp.127-139
• /
• 2013

With an advent of recent knowledge-based society, the interest in intellectual property has increased. Firms have tired to result in productive outcomes through continuous innovative activity. Especially, ICT firms which lead high-tech industry have tried to manage intellectual property more systematically. Firm's interest in the patent has increased in order to manage the innovative activity and Knowledge property. The patent involves not only simple information but also important values as information of technology, management and right. Moreover, as the patent has the detailed contents regarding technology development activity, it is regarded as valuable data. The patent which reflects technology spread and research outcomes and business performances are closely interrelated as the patent is considered as a significant the level of firm's innovation. As the patent information which represents companies' intellectual capital is accumulated continuously, it has become possible to do quantitative analysis. The advantages of patent in the related industry information and it's standardize information can be easily obtained. Through the patent, the flow of knowledge can be determined. The patent information can analyze in various levels from patent to nation. The patent information is used to analyze technical status and the effects on performance. The patent which has a high frequency of citation refers to having high technological values. Analyzing the patent information contains both citation index analysis using the number of citation and network analysis using citation relationship. Network analysis can provide the information on the flows of knowledge and technological changes, and it can show future research direction. Studies using the patent citation analysis vary academically and practically. For the citation index research, studies to analyze influential big patent has been conducted, and for the network analysis research, studies to find out the flows of technology in a certain industry has been conducted. Social network analysis is applied not only in the sociology, but also in a field of management consulting and company's knowledge management. Research of how the company's network position has an impact on business performances has been conducted from various aspects in a field of network analysis. Social network analysis can be based on the visual forms. Network indicators are available through the quantitative analysis. Social network analysis is used when analyzing outcomes in terms of the position of network. Social network analysis focuses largely on centrality and structural holes. Centrality indicates that actors having central positions among other actors have an advantage to exert stronger influence for exchange relationship. Degree centrality, betweenness centrality and closeness centrality are used for centrality analysis. Structural holes refer to an empty place in social structure and are defined as efficiency and constraints. This study stresses and analyzes firms' network in terms of the patent and how network characteristics have an influence on business performances. For the purpose of doing this, seventy-four ICT companies listed in S&P500 are chosen for the sample. UCINET6 is used to analyze the network structural characteristics such as outdegree centrality, betweenness centrality and efficiency. Then, regression analysis test is conducted to find out how these network characteristics are related to business performance. It is found that each network index has significant impacts on net income, i.e. business performance. However, it is found that efficiency is negatively associated with business performance. As the efficiency increases, net income decreases and it has a negative impact on business performances. Furthermore, it is shown that betweenness centrality solely has statistically significance for the multiple regression analysis with three network indexes. The patent citation network analysis shows the flows of knowledge between firms, and it can be expected to contribute to company's management strategies by analyzing company's network structural positions.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• 제15권2호
• /
• pp.47-65
• /
• 2020

With the era of the Fourth Industrial Revolution in sight, innovative business models utilizing new technologies are emerging, and startups are enjoying an abundance of opportunities based on the agility to respond to disruptive innovations and the opening to new technologies. However, what is most important in creating a sustainable start-up ecosystem is not the start-up itself, but the process of research-start-investment-investment-the leap to listing and big business-in order to build a virtuous circle of startups that leads to re-investment. To this end, the environment created in the hub area where start-ups were conducted is important, and these material and non-material environmental factors are described as being inclusive by the word "entrepreneurial ecosystem." This study aims to provide implications for Korea's entrepreneurial ecosystem through the study of the interaction of the elements that make up the start-up ecosystem and the relationship of ecosystem participants in Singapore. Singapore has been consistently mentioned as the top two Asian countries in assessing the start-up environment and business environment. In this process, six elements of the entrepreneurial ecosystem presented by Isenberg(2010)-policies, finance, culture, support, human resources, and market-are the best frameworks for analyzing entrepreneurial ecosystems in terms of well encompassing prior studies related to entrepreneurial ecosystem elements, and a model of regional transformation is formed focusing on some elements to suit Singapore, the target area of study. By considering that Singapore's political nature would inevitably have a huge impact on finance, Smart Nation policy was having an impact on university education related to entrepreneurship, and that the entrepreneurial networks and global connectivity formed within Singapore's start-up infrastructure had a significant impact on Singapore's start-up's performance, researches needed to look more at the factors of policy, culture and market. In addition, qualitative research of participants in the entrepreneurial ecosystem was essential to understand the internal interaction of the elements of the start-up ecosystem, so the semi-structured survey was conducted by visiting the site. As such, this study examined the status of the local entrepreneurial ecosystem based on qualitative research focused on policies, culture and market elements of Singapore's start-up ecosystem, and intended to provide implications for regulations related to start-ups, the role of universities and start-up infrastructure through comparison with Korea. This could contribute not only to the future research of the start-up ecosystem, but also to the creation of a start-up infrastructure, boosting the start-up ecosystem, and the establishment of the orientation of the start-up education in universities.

• Journal of Soil and Groundwater Environment
• /
• 제6권4호
• /
• pp.61-72
• /
• 2001

A barrier liner system is placed at the bottom and side slope in landfill to protect a leaking of leachate that the hydraulic conductivity of this system should be less than It 107cm/sec. In this study, the soil-bentonite mixture for the bottom liner system was evaluated in two point of views : changing characteristics of the hydraulic conductivity according to the different mixing ratio of soil-bentonite with the effect of bentonite swelling and the difference method (A & D type) of compaction on the hydraulic conductivity. As the results, maximum dry density (${\gamma}$$_{dmax}$) of SC group mixture was higher than of CL group mixture. However, the result of optimum moisture contents(OMC) of both groups were the contrary. In case of ${\gamma}$$_{dmax}$ by different compaction method, D type was higher than A. But the OMC were the contrary. The difference of ${\gamma}$$_{dmax}$ according to the Compaction energy, “SC” group mixture W3S higher than the “CL” group. In case of OMC of “CL” group was higher than “SC” group. The effecting of swelling was a little bit different on the two factors. According to the result of compaction test, the use of site soil only could not meet the criteria on hydraulic conductivity, but could find a solution for the mixing ratio of bentonite mixture were satisfied to the standard of barriation. The increased in bentonite mixing ratio and degree of swelling, the values of hydraulic conductivity were decreased. Especially the “CL” group with “D” type compaction measured the lowest value with the same conditions. Also, the bentonite mixing ratio has more influenced on the hydraulic conductivity compare with swelling effect. The “SC” group mixture with “A” typo compaction got a big difference from others. The evaluation of economic for the construction cost on the two cases, the lower bentonite mixing ratio of soil-bentonite mixed soil is more economically because of bentonite cost.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.111-112
• /
• 2009

Diamond-like carbon (DLC) is a convenient term to indicate the compositions of the various forms of amorphous carbon (a-C), tetrahedral amorphous carbon (ta-C), hydrogenated amorphous carbon and tetrahedral amorphous carbon (a-C:H and ta-C:H). The a-C film with disordered graphitic ordering, such as soot, chars, glassy carbon, and evaporated a-C, is shown in the lower left hand corner. If the fraction of sp3 bonding reaches a high degree, such an a-C is denoted as tetrahedral amorphous carbon (ta-C), in order to distinguish it from sp2 a-C [2]. Two hydrocarbon polymers, that is, polyethylene (CH2)n and polyacetylene (CH)n, define the limits of the triangle in the right hand corner beyond which interconnecting C-C networks do not form, and only strait-chain molecules are formed. The DLC films, i.e. a-C, ta-C, a-C:H and ta-C:H, have some extreme properties similar to diamond, such as hardness, elastic modulus and chemical inertness. These films are great advantages for many applications. One of the most important applications of the carbon-based films is the coating for magnetic hard disk recording. The second successful application is wear protective and antireflective films for IR windows. The third application is wear protection of bearings and sliding friction parts. The fourth is precision gages for the automotive industry. Recently, exciting ongoing study [1] tries to deposit a carbon-based protective film on engine parts (e.g. engine cylinders and pistons) taking into account not only low friction and wear, but also self lubricating properties. Reduction of the oil consumption is expected. Currently, for an additional application field, the carbon-based films are extensively studied as excellent candidates for biocompatible films on biomedical implants. The carbon-based films consist of carbon, hydrogen and nitrogen, which are biologically harmless as well as the main elements of human body. Some in vitro and limited in vivo studies on the biological effects of carbon-based films have been studied [$2{\sim}5$].The carbon-based films have great potentials in many fields. However, a few technological issues for carbon-based film are still needed to be studied to improve the applicability. Aisenberg and Chabot [3] firstly prepared an amorphous carbon film on substrates remained at room temperature using a beam of carbon ions produced using argon plasma. Spencer et al. [4] had subsequently developed this field. Many deposition techniques for DLC films have been developed to increase the fraction of sp3 bonding in the films. The a-C films have been prepared by a variety of deposition methods such as ion plating, DC or RF sputtering, RF or DC plasma enhanced chemical vapor deposition (PECVD), electron cyclotron resonance chemical vapor deposition (ECR-CVD), ion implantation, ablation, pulsed laser deposition and cathodic arc deposition, from a variety of carbon target or gaseous sources materials [5]. Sputtering is the most common deposition method for a-C film. Deposited films by these plasma methods, such as plasma enhanced chemical vapor deposition (PECVD) [6], are ranged into the interior of the triangle. Application fields of DLC films investigated from papers. Many papers purposed to apply for tribology due to the carbon-based films of low friction and wear resistance. Figure 1 shows the percentage of DLC research interest for application field. The biggest portion is tribology field. It is occupied 57%. Second, biomedical field hold 14%. Nowadays, biomedical field is took notice in many countries and significantly increased the research papers. DLC films actually applied to many industries in 2005 as shown figure 2. The most applied fields are mold and machinery industries. It took over 50%. The automobile industry is more and more increase application parts. In the near future, automobile industry is expected a big market for DLC coating. Figure 1 Research interests of carbon-based filmsFigure 2 Demand ratio of DLC coating for industry in 2005. In this presentation, I will introduce a trend of carbon-based coating research and applications.

• Korean Journal of Environment and Ecology
• /
• 제22권4호
• /
• pp.435-441
• /
• 2008

This study conducted a survey on the moulting sequence subsequent to age of Haliaeetus pelagicus raised in captivity at the Ornithology Laboratory attached to Kyungsung University for about six years from November, 2000 until July, 2006. The survey indicated that the moult of rectrices usually began in July and continued until April of the next year and most of the rectrices were replaced by one-time moult. Usually, about two thirds of the tail feathers were replaced while the rest were replaced no later than April of the next year, and the moult also continued during the wintertime. The total number of rectrices was 14, and the moult progressed alternately on a systematic basis. The progress of the moult for female & male was made on four stages and three stages respectively and the characteristic shown on every stage of the moult was that the left & right tail feathers progressed symmetrically and not until one stage of progress almost completed did the next stage began. The color of the juvenile steller's sea-eagle was dotted with black spots on its original white color and there existed regular black belt on its feather's fringes; however, it was difficult to identify its age by tail feathers only because there was almost no difference in color between feathers ranging from the first to the third generation(1st-3rd summer feathers). In addition, this research took the different amounts of black-speckled pattern appearing by individual into consideration. There existed slight black speckles in white color feathers of the fourth generation(the 4th summer feathers) while showing a big difference compared to the 3rd generation feathers. The 5th generation feathers[the 5th summer feathers]were found to be equipped with perfect tail feathers having virgin white of a steller's sea-eagle after completing its 4th molt. When observing a steller's sea-eagle in the open air, it is necessary for an observer to have a deliberate examination in judging its age belonging to the 1st-3rd generation feathers, and it is considered that the changes of other parts of feathers should be also observed besides tail feathers.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• 제16권6호
• /
• pp.85-105
• /
• 2021

In this study, a case study was conducted on Advanced Nano Products Co.,Ltd, a company that was established in 2000 and has the core technology to produce and commercialize nano materials and ultrafine nano powders based on nano technology. Deviating from the general case study, a case study analysis frame was set based on the theory of technology management and industry-university cooperation theory, and cases were analyzed. In this case study, Advanced Nano Products Co.,Ltd. was analyzed from two analytical perspectives: the establishment of a Management Of Technology system within the company and the Industry-Academic Cooperation activity. Based on this theoretical-based analysis framework, company visit interviews and related data research and analysis were conducted. As a result of the study of the case company, it was possible to derive how the technology management and industry-university cooperation affect the growth stage of the company as follows. First, the strategic use of technology management is an important factor in strengthening the competitive advantage and core competencies of venture companies, and for survival and growth of startups in the early stages. Second, strategic use of technology management and patents and establishment of a patent management system are a part of business strategy and play a pivotal role in corporate performance. Third, the human and material infrastructure of universities affects the growth of companies in the early stage of start-up, and the high utilization of industry-university cooperation promotes the growth of companies. Fourth, continuous industry-academic cooperation activities in the growth and maturity stages of a company's growth stage are the basis for activating external exchanges and building networks. Lastly, technology management and industry-university cooperation were found to be growth factors for each growth stage of a company. In order for a company to develop continuously from the start-up to the growth and maturity stages, it is necessary to establish a technology management system from the beginning and promote strategic technology management activities. In addition, it can be said that it is important to carry out various industry-academic cooperation activities outside the company. As a result of the case analysis, it was found that Advanced Nano Products Co.,Ltd, which performed these two major activities well, overcame the crisis step by step and continued to grow until now. This study shows how the use of technology management and industry-academic cooperation creates value in each growth stage of technology-based venture companies. In addition, its active use will play a big role in the growth of other venture companies. The results of this case study can be a valid reference for growth research of technology start-up venture companies and related field application and utilization.

• Korean Journal of Environment and Ecology
• /
• 제22권3호
• /
• pp.249-259
• /
• 2008

The purpose of this study was to analyze the users' behaviors and to suggest development strategies in Uljin Kumgang pine tree(Pinus densiflora for. erecta) eco-forest(UKPEF), which is located in Kyeongbuk. The data were collected by interviewing 122 visitors to september 3 from august 29, 2007 with a constructed questionnaire. The results of the analysis are as follows. 1. The major visitors of UKPEF are male and the age between 20 to 30, the residents of the Uljin county with relatively high academic background. 2. The motive of visiting UKPEF is mainly by the beauty and taste of Kumgang pine tree and the condition of the forest. The visitors are mainly composed of family, not big group. 3. The visitors of UKPEF have obtained information about the Kumgang fine tree forest mainly from friends, not from the internet or travel agency. 4. The visitors of UKPEF pointed out lack of convenient facilities such as toilets and water-supply facilities. However, visitors are satisfied by the condition of the forest. 5. The visitors of UKPEF set a high value on Kumgang fine tree, So, more active marketing strategy about Uljin Kumgang pine tree has to be established. 6. The visitors of UKPEF are more satisfied by the Uljin Kumgang pine tree forest than expected. The development strategies of UKPEF are suggest as follows. (1) Auto tram system has to be set up and new trail should be constructed to attract more visitors and people of other regions. (2) To attract group tourists, new program should be developed. (3) Advertisement through internet or travel agency has to be developed. (4) Government(local) should make a plan to register the forest as World natural heritage. (5) Monitoring and evaluation system has to be developed to satisfy tourists. In conclusion, the efforts of taking care of and preserving the UKPEF should be made at the national level. I hope that more Koreans can have chance to feel and experience the value and excellence ofthe Uljin Kumgang pine tree(Pinus densiflora for. erecta)

• Journal of Fashion Business
• /
• 제2권3호
• /
• pp.137-156
• /
• 1998

In this study, the researcher studied the historical background, and the traditional culture about dress and ornament of Yunnan Province of China, The results of the study are as follows. 1. Dress and personal ornaments of the Va peoples vary with the locality. Their traditional dress and adornment is characterized by those in the Ximeng area. Men usually wear black or dark blue collarless jackets and black and dark blue loose and short bagged trousers with folding waist. Women usually wear close-fitting sleeveless pullover blouses with V-shaped necks and straight skirts with patterns of red and black cross stripes. 2. Jingpo men have changed to wear shirts with button down the front and trousers. They also entwine white turbans with red bobbles on both ends, and carry diagonally long knives, firelocks and red woolen figured satchels on their shoulders. Women usually wear black velvet blouses with silver bowl-shaped ornaments and chains around collars and on the fronts. They also wear red straight skirts with overlapped slit on the right, waistbands and waist hoops made of rattan and bamboo. 3. The Naxi nationality has a long history and excellent traditional culture. In modern times, women like to wear red, blue or purple laced blouses, long double-layered pleated skirts, waistbands and embroidered shoes. They wear their hair in buns with either hats or kerchiefs over them. While working or going out, they put on their "seven-star" capes made of sheepskin and embroidered with two big circles and seven small ones, while is a symbol of their frog totem. 4. The dress and adorment of the Jinuo people is simple, elegant and has its own unique characteristics. Men usually wear white buttonless shirts with round necks and an opening on the front, knee-length bagged trousers and legging. They wear cloth turbans, earrings and also put small bamboo or silver pipes in the holes of their earlobes. Women wear short buttonless blouses with round necks and seven coloured stripes and thin tight-fitting or embroidered triangular underwear. 5. The dress and ardorment of the Benglong (De' ang) nationality has its own strong national colour. Most of the men wear jackets with buttons arranged diagonally on the front, loose, short trousers and black or white turbans. Some young men like to wear eardrops and silver necklaces. Women's dress and adornment differs according to various branches. For example, the women of the Bielie and Liang branches have their hair shaved and wear black turbans. They use large square silver tablets as buttons and wear blue or black blouses with buttons down the front. 6. Oai men usually wear trousers, white or blue cloth turbans and round-necked shirts with buttons down the front or arranged diagonally on the front. Women usually wear long straight skirt and blouses. But dress and adornment varies in regions. 7. The Bai nationality dress and adornment has unique national style. The dress fabrics are mainly cotton cloth, silk and velvet. Men usually wear red velvet vests over white shirts with buttons down the front or black velvet vests over light blue shirts. They also wear white of blue turbans and carry satchels with beautiful embroidered designs over their shoulders. Women usually wear red velvet vests over white blouses, or black vests over light-coloured blouses.