• Title/Summary/Keyword: The 4th Industry

Search Result 936, Processing Time 0.028 seconds

집단지성 네트워크형 사이버폴리스 자원봉사시스템 구축에 관한 연구 (A Study on the Development of Cyberpolice Volunteer System Using the Collective Intellectual Network)

  • 김두현;박성준;나기성
    • 시큐리티연구
    • /
    • 제61호
    • /
    • pp.59-85
    • /
    • 2019
  • 4차 산업혁명으로 현실세계와 가상세계의 경계가 사라지는 현실에서 시공간을 초월하여 발생하는 사이버범죄에 대하여 실정법 체계 하에 구축된 정부조직의 경찰 공권력으로만 경찰의 임무를 다 하는데 분명한 한계를 갖고 있다. 본 논문은 문헌적 연구와 보안업무 경험을 토대로 사이버범죄에 대하여 실시간 대응할 수 있도록 각 사회분야의 집단지성이 자발적으로 참여할 수 있는 사회적 시스템을 구축하여 사이버공간에서의 범죄를 예방하고 사회적 공감대를 형성할 수 있는 대책방안을 제시하는 것을 목적으로 연구하였다. 집단지성 네트워크형 사이버폴리스 자원봉사시스템 구축을 위한 방안으로 우선, 집단지성 네트워크형 사이버폴리스 자원봉사시스템 구축이 필요하다. 이 구성은 제반 안전관리 전문가 등으로 구성한다. 그리고 경찰청의 경비업법상 민간조사업무 규정이 신설되어야 한다. 또한 집단지성 사이버폴리스 자원봉사시스템의 안전지킴이 봉사활동을 강화해야 하며, 선진국들의 사이버범죄에 대한 연구교훈 및 법적 대응방안이 도입되어야 한다. 끝으로 개인정보 보호법, 정보통신망 이용촉진 및 정보보호 등에 관한 법률, 신용정보의 이용 및 보호에 관한 법률 등의 과도한 규제 규정을 개정하여야 하며, 경찰관은 사전예방활동을 위한 사이버범죄 위해 인지능력을 배양해야 한다.

중국민용항공법상 항공운송인의 책임제도 (The Carrier Liability System from the View Point of Chinese Civil Aviation Law)

  • 김선이;오춘연
    • 항공우주정책ㆍ법학회지
    • /
    • 제19권2호
    • /
    • pp.199-220
    • /
    • 2004
  • 2003년 11월 4일부터 전세계적으로 발효된 몬트리올조약은 운송인의 책임의 범위에 있어서 많은 변화를 가져왔고 운송인이 제소될 수 있는 법원의 범위를 확대하였으며 운송인의 책임을 인정함에 있어 코드쉐어의 영향을 반영하였다. 몬트리올조약은 그 동안 수많은 조약들이 채택했던 원칙들을 접대성하여 국제항공운송의 통일성을 단일조약에 체계화하였다. 바르샤바조약체계의 문제점으로 지적되었던 낮은 배상한도액을 몬트리올조약에서 상향 조정하였고 항공운송인들의 입장을 보호하기 위한 조약인 바르샤바조약은 이제 몬트리올조약을 통해 승객의 입장을 반영한 조약이 되었다. 중국민용항공법은 1996년 3월 1일부터 발효되었는데 공법적인 규정과 사법적인 규정이 혼재되어 있는 것이 그 특색으로 나타나고 있다. 그 중 항공운송인의 책임제도에 관한 내용은 민용항공법 제9장에 규정되어 있는데 본 논문에서 구체적으로 다루고 또 앞에서 서술한 몬트리올협약과 중국의 관계도 적어보려고 한다. 현재 중국은 IATA회원국 중에서 항공여객수송량이 5위 권에 접어들고 있으며 항공화물수송량도 6위를 차지하고 있음에도 불구하고 아직도 이 조약에 가입을 하지않고 있음은 문제점으로 지적될 수 있고 세계의 항공산업선진국들과 어깨를 나란히하고 상호 협력하기 위해 조속히 중국도 이 조약에 가입하는 것이 필요하다고 본다. 중국정부가 몬트리올조약을 비준한다면 중국의 승객들은 그로 인한 이익을 향유하게 될 뿐만 아니라 승객들과 항공사 모두의 이익이 될 것이다.

  • PDF

Bright Internet 신뢰네트워크 도입에 따른 지능정보사회의 사이버 역기능 해소에 대한 인식 분석 (Analysis on the Perception of the Cyber Dysfunction in the Intelligent Information Society According to the Introduction of the Bright Internet Trust Network)

  • 임규건;안재익
    • 경영정보학연구
    • /
    • 제22권3호
    • /
    • pp.99-118
    • /
    • 2020
  • 현재 우리 사회는 4차 산업혁명의 물결 속에서 지능정보사회로 전개되고 있으며 이러한 변화는 모든 분야를 혁신시키는 긍정적 효과를 가져 올 것이다. 하지만 기술의 양면성으로 순기능과 동시에 역기능이 발생되고 있다. 지능화에 의해 해킹, 테러, 개인정보 침해, 불법콘텐츠 유통 등 사이버 역기능에 대한 위협은 더욱 심각해 질 것이다. 지금까지 인터넷의 보안 체계는 사후적(Proactive) 보안체계였으나 근래에 예방적(Preventive) 보안체계 방안인 신뢰네트워크에 대한 제안이 이루어지고 있다. 이에 본 연구에서는 신뢰네트워크 기술 중 하나인 Bright Internet에 대해서 지능정보사회의 사이버 역기능 해소 가능성을 분석하고자 한다. 본 연구에서는 지능정보사회의 사이버 역기능을 정의하고 Bright Internet 5대 원칙 도입에 대한 지능정보사회의 사이버 역기능 변화에 대한 인식을 분석한다. 연구결과 Brighit Internet 신뢰네트워크 도입으로 인한 지능정보사회의 역기능 해소가 가능하며 특히 사이버 범죄 및 테러, 권리침해 영역의 개선이 클 것으로 예측되었다. 5대 원칙 중에는 확인 가능한 익명성의 원칙과 국제 협력 조사 원칙이 역기능 해소의 기대치가 높게 나타나 효과가 클 것으로 분석되었다.

도플러 주파수에 의한 무인 비행체의 통신 성능 분석 (Communication performance analysis of unmanned aerial vehicle by Doppler frequency)

  • 이희권;염성관;김용갑
    • 한국정보전자통신기술학회논문지
    • /
    • 제12권6호
    • /
    • pp.612-618
    • /
    • 2019
  • 무인 이동체 관련 산업은 4차 산업혁명 기술발전과 더불어 공공 및 민간 수요의 급증으로 시장이 폭발적으로 성장하고 있다. 뿐만 아니라 통신 서비스에도 무인 이동체가 활용되고 있다. 본 논문에서는 도플러 주파수의 특성에 따른 무인 비행체의 통신 성능을 분석하였다. 무인 비행체의 기하학적 모델을 이용하여 도플러 주파수를 계산하고, 제어기의 위치를 원점으로 고속의 무인 비행체를 고려하여 시속 10km, 30km, 300km, 1000km의 도플러 주파수와 AWGN에 의한 BER 성능을 측정하였다. 도플러 주파수 모델은 Dent 모델을 이용하였으며, 가산성 백색 가우시안 잡음(AWGN)을 추가하여 송신단과 수신단의 비트 오차를 확인하였다. 저속의 무인 비행체는 일반적으로 0.2의 BER 성능을 나타내었으며, 고속의 무인 비행체는 일반적으로 0.06의 BER 성능을 나타내었다. 동일한 속도에서 주파수 대역이 증가하면 BER 성능은 증가하였으며, 동일한 주파수 대역에서 속도가 증가하면 BER 성능은 감소됨을 확인하였다. 이는 이론적으로 예상 가능한 BER 성능 예측을 시뮬레이션 결과를 통해 확인하였다. 2.6GHz, 5GHz, 28GHz 각각의 주파수 대역에서 도플러 주파수에 의한 BER 특성과 제어기 함수에 의한 BER 특성을 확인하였으며, 무인 비행체의 이동시 발생하는 도플러 주파수는 제어기의 위치와 가까운 곳에서 통신 성능에 많은 영향을 미치는 것을 확인하였다.

고려인삼학회의 발전사 (The Development History of the Korean Society of Ginseng)

  • 오훈일
    • 인삼문화
    • /
    • 제3권
    • /
    • pp.74-89
    • /
    • 2021
  • 고려인삼학회는 1975년 9월 26일 회원 100여 명으로 창립되었고, 1976년 12월 1일 고려인삼학회지(Korean Journal of Ginseng Science) 창간호를 야심차게 영문으로 발간하였다. 그러나 1977년 Vol. 2 발간 이후 국·영문 혼용으로 변경하였고, 1978년에는 학회 내부사정으로 학술지를 발간하지 못하였다. 1998년부터 학회지명을 Journal of Ginseng Research(JGR)로 변경하여 연 4회 발간하였다. JGR은 2010년 Vol. 34부터 33년 만에 다시 영문 전용으로 출판되었으며, 2010년에 SCIE 및 SCOPUS에 등재되었다. 2012년에는 PubMed Central에 등재되었으며, 2016년부터 Elsevier사에서 JGR을 출판하게 되었다. JGR은 Impact Factor가 계산된 첫해인 2012년에 IF 2.259를 기록하였고, 2015년에 3.898로 3.0을 넘어섰으며 2019년에 5.487에 달해 SCI에 등재된 우리나라 학술지 122개 중 2위를 기록하였다. 한편, Integrative & Complementary Medicine 분야에서 세계 1위를 기록하였다. 고려인삼학회는 1998년부터 4년마다 국제인삼심포지엄을 주관하여 개최하고 있고, 심포지엄 프로시딩을 발간하고 있다. 2007년 인삼정보지인 『고려인삼과 산업』을 연 2회씩 발간하여 현재 제14권 1호를 발간하였다. 2019년 고려인삼학회는 인삼의 인문사회과학적 연구를 조명하기 위한 『인삼문화』를 창간하였다. 고려인삼학회는 『고려삼의 이해』, 『고려인삼연구 20년사』, 『고려인삼학회 30년사』, 『생활속의 고려인삼』 등 많은 도서를 출판하였다.

상례·제례에 관한 연구 - 현행 가정의례법령을 중심으로 (A Study on Funeral Rites and Ancestral Memorial Rites - Focusing on the current Family Ritual Act)

  • 정진구;이철영;박채원
    • 산업진흥연구
    • /
    • 제5권4호
    • /
    • pp.81-90
    • /
    • 2020
  • 본 연구는 현행 가정의례법령에서 규정한 상례·제례에 관한 변화양상을 살펴보고 문제점의 제시와 실효성 확보를 연구하고자 한다. 상례·제례와 관련된 가정의례의 의식절차를 합리화하고 건전한 가정의례의 보급 및 정착을 위한 사업과 활동을 지원·조장하여 허례허식을 없애고 건전한 사회 기풍을 조성하는 것을 목적으로 「건전가정의례의 정착 및 지원에 관한 법률」과 동법 시행령이 제정되었다. 이에 모든 국민이 가정의례의 참뜻을 구현할 수 있도록 가정의례의 의식절차를 엄숙하고 간소하게 행하 「건전가정의례준칙」을 정하였으며, 공무원, 공공기관·단체의 임직원 및 사회 지도층에 있는 자는 솔선하여 모범적으로 지키도록 규정하고 있다. 그러나 1969년 제정된 가정의례준칙에 관한 법률 이후의 변화를 살펴보면, 양성평등 실현을 훼손하는 남녀차별적인 요소의 규정이 있으며, 가정의례법의 확산과 정착을 위한 교육의 진행은 각급 교육기관에 관한 처벌규정이 없어 실효성이 제한되어 왔다. 특히 국가자격제도로 운영 중인 '장례지도사 양성과정'에서도 가정의례에 관한 교육이 미비한 실정이다. 따라서 본 연구를 통해서 상례·제례에 관한 가정의례법과 제도의 설치목적에 부합한 발전적 논의의 기초를 제시하고자 한다.

STB2강의 고온피로강도 특성에 미치는 열처리의 영향 (Effect of Heat Treatment on High Temperature Fatigue Strength Characteristics of STB2 Bearing Steel)

  • 오세규;김연호;이상국;이종두
    • 한국해양공학회지
    • /
    • 제3권2호
    • /
    • pp.138-144
    • /
    • 1989
  • It has been very important in various industry fields to improve the fatigue strength characteristics of bearings such as bearing life, fatigue limit, etc., because such poor properties could result in shortening the machinery life as well as in decreasing the accuracy. However, no successful heat treatment criterion seems to be available at present. In this study, the effect of the $170^{\circ}C\times120min$ tempering cycles repeated after $380^{\circ}C\times80min$ oil quenching for $800^{\circ}C$ spheroidizing-annealed bearing steel (STB2) as base metal on the $120^{\circ}C$ high temperature rotary bending fatigue strength characteristics were investigated, including the effects on hardness, Charpy impact value and micro-structure, in order to seek for the best heat treatment condition finally. The important results obtained are as follows : 1) The optimal cycle of tempering so that the fatigue strength .sigma. could become the highest was the 4th cycle. And it is confirmed that this $\sigma_{F}$ is about 6 times more increased than that of base metal, and about 1.3 times more increased than the case of the 1 cycle tempered. 2) As a result of the investigation for the effects of tempering cycles on hardness, the hardness at the tempering number of 2 thru 5 cyles was not decreased severely ; only about 10% decrease from those of the quenched and 1 cycle tempered case. Such hardness is equivalent to $H_{R}$/C61-62 with no bad effect on anti-abrasion of bearing steel. 3) In the case of 2 thru 5 cycle tempering as well as 1 cycle tempering, the impact value was not so improved comparing with the case of quenching, but an increase of 5 to 10% could be expected at least. 4) It was experimentally confirmed that the control of the mechanical properties improvement such as fatigue strength and fatigue life for bearing steels could be possible by the number of tempering cycles.

  • PDF

STB2강의 고온피로강도 특성에 미치는 열처리의 영향 (Effect of Heat Treatment on High Temperature Fatigue Strength Characteristics of STB2 Bearing Steel)

  • 오세규;김연호;이상국;이종두
    • 한국해양공학회지
    • /
    • 제3권2호
    • /
    • pp.638-638
    • /
    • 1989
  • It has been very important in various industry fields to improve the fatigue strength characteristics of bearings such as bearing life, fatigue limit, etc., because such poor properties could result in shortening the machinery life as well as in decreasing the accuracy. However, no successful heat treatment criterion seems to be available at present. In this study, the effect of the $170^{\circ}C\times120min$ tempering cycles repeated after $380^{\circ}C\times80min$ oil quenching for $800^{\circ}C$ spheroidizing-annealed bearing steel (STB2) as base metal on the $120^{\circ}C$ high temperature rotary bending fatigue strength characteristics were investigated, including the effects on hardness, Charpy impact value and micro-structure, in order to seek for the best heat treatment condition finally. The important results obtained are as follows : 1) The optimal cycle of tempering so that the fatigue strength .sigma. could become the highest was the 4th cycle. And it is confirmed that this $\sigma_{F}$ is about 6 times more increased than that of base metal, and about 1.3 times more increased than the case of the 1 cycle tempered. 2) As a result of the investigation for the effects of tempering cycles on hardness, the hardness at the tempering number of 2 thru 5 cyles was not decreased severely ; only about 10% decrease from those of the quenched and 1 cycle tempered case. Such hardness is equivalent to $H_{R}$/C61-62 with no bad effect on anti-abrasion of bearing steel. 3) In the case of 2 thru 5 cycle tempering as well as 1 cycle tempering, the impact value was not so improved comparing with the case of quenching, but an increase of 5 to 10% could be expected at least. 4) It was experimentally confirmed that the control of the mechanical properties improvement such as fatigue strength and fatigue life for bearing steels could be possible by the number of tempering cycles.

누리교육과정 기반 인공지능교육 콘텐츠 개발에 관한 기초연구 (A Basic Study on the Development of Artificial Intelligence Education Content Based on Nuri Curriculum)

  • 변영신;한정수
    • 사물인터넷융복합논문지
    • /
    • 제8권5호
    • /
    • pp.71-76
    • /
    • 2022
  • 4차 산업의 혁신적인 발달과 코로나 팬데믹은 교육시장에 커다란 변화를 일으켜 급기야는 유치원을 비롯한 초중고교에 인공지능(AI)교육을 실행하도록 하였다. 그러나 미처 준비되지 않은 상황에서의 유아 AI 교육은 결과 중심적, 특별활동 형태로 이루어지고 있어 유아 AI 교육이란 무엇이며, AI 교육내용 규명과 이를 어떻게 누리교육과정에 접목하는가에 관한 연구의 필요성이 제기되었다. 이에 따라 본 연구에서는 문헌 연구를 통하여 유아 AI 교육을 정의하고 AI 교육내용을 규명하여 이를 누리교육과정에 편성하여 운영하도록 하였다. 분석 결과 유아 AI 교육은 컴퓨팅 사고력을 기반으로 디지털 역량을 함양하는 것을 목적으로 이루어져야 하며, 컴퓨터, 인터넷, 프로그램을 AI 교육의 하위요소로 추출하였다. 이를 누리교육과정에 접목시키기 위해 두 가지 접근 방법을 제시하였다. 첫째는 설정된 세 개의 AI 교육내용을 각각 생활주제로 설정하여 그에 따른 하위요인을 선정하고 각각의 하위요인에 적합한 활동을 계획하여 시행하는 것이다. 둘째는 기존 누리 교육과정의 생활주제에 적합하게 AI 교육내용을 하위 교육활동 차원으로 전개하여 운영하는 것이다. 본 연구가 유아교육의 특성을 고려하고 누리교육과정에 편성되어 진정한 의미의 유아 AI 교육이 실현되기를 희망하며, 누리과정 5개 영역에 따른 AI 놀이 교육 프로그램에 대한 보다 많은 연구가 이루어지기를 희망하는 바이다.

순환식 수경재배에 적합한 방울토마토 '꼬꼬' 배양액 개발 (Development of Optimal Nutrient Solution of Cherry Tomato (Lycopersicon esculentum Mill. 'KoKo') in a Closed Soilless Culture System)

  • 유성오;최기영;전경수;배종향
    • 생물환경조절학회지
    • /
    • 제15권1호
    • /
    • pp.69-77
    • /
    • 2006
  • The experiment was conducted to investigate the nutrition absorption pattern in the growth stage and develope the optimal nutrient solution hydroponically grown the cherry tomato 'Koko' in closed substrate culture system with the nutrient solution of National Horticultural Research Station in Japan into 1/2S, 1S, and 2S. When plant was grown in 1/2S, the growth and yield were high and the pH and EC in the root zone were stable. Suitable composition of nutrient solution for cherry tomato was $NO_3-N\;6.8,\;PO_4-P\;2.7,\;K 3.2,\;Ca\;3.6\;and\;Mg\;1.1\;me\;L^{-1}$ in the early growth stage, $NO_3-N\;7.3,\;PO_4-P\;2.2,\;K\;3.7,\;Ca\;3.6;and\;Mg\;1.1\;me\;L^{-1}$ in the late growth stage by calculating a rate of nutrient and water uptake. To estimate the suitability for the nutrient solution in a development of cherry tomato developed by Wongkwang university in Korea (WU), plant was grown in perlite substrate supplied with different solution and strengths(S) by research station for greenhouse vegetable and floriculture in the Netherlands (Proefstation voor tuinbouw onder glas th Mssldwijk; PTG) of 1/2S, 1S, and 2S, respectively. The growth was good at the PTG and WU 2S in the early stage and the PTG of 1S and WU of 1S and 2S in the late stage. The highest yield of cherry tomato obtained in the WU of 2S. pH and EC in root zone of WU of 2S were stable during the early and late growth stage. Therefore when cherry tomato plant was grown in WU of 2S of EC $1.6{\sim}2.0\;dS\;m^{-1}$in the nutrient solution, not only stable growth and yield but also fertilizer reduction can be obtained than that of PTG.