• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1099-1109
• /
• 2020

The performance of gadolinium burnable absorber (GdBA) for reactivity control in UO₂ and (U, Th)O₂ fuels and its impact on spent fuel characteristics was performed. Five fuel assemblies: one without GdBA fuel rod and four each containing 16, 24, 34 and 44 GdBA fuel rods in both fuels were investigated. Reactivity swing in all the FAs with GdBA rods in UO₂ fuel was higher than their counterparts with similar GdBA fuel rods in (U, Th)O₂ fuel. The excess reactivity in all FAs with (U, Th)O₂ fuel was higher than UO₂ fuel. At the end of single discharge burn-up (~ 49.64 GWd/tHM), the excess reactivity of (U, Th) O₂ fuel remained positive (16,000 pcm) while UO₂ fuel shows a negative value (-6,000 pcm), which suggest a longer discharge burn-up in (U, Th)O₂ fuel. The concentration of plutonium isotopes and minor actinides were significantly higher in UO₂ fuel than in (U, Th)O₂ fuel except for ²³⁶Np. However, the concentration of non-actinides (gadolinium and iodine isotopes) except for ¹³⁵Xe were respectively smaller in (U, Th)O₂ fuel than in UO₂ fuel but may be two times higher in (U, Th)O₂ fuel due to its potential longer discharge burn-up.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.315-322
• /
• 2015

The research carried out on thorium-based fuels indicates that these fuels can be considered as economic alternatives with improved physical properties and proliferation resistance issues. In the current study, neutronic assessment of $UO_2$ in comparison with two $(Th-^{233}U)O_2$, and $(Th-^{235}U)O_2$ thorium-based fuel loads in a heavy water research reactor has been proposed. The obtained computational data showed both thorium-based fuels caused less negative temperature reactivity coefficients for the modeled research reactor in comparison with $UO_2$ fuel loading. By contrast, $^{235}U$-containing thorium-based fuel and $^{235}U$-containing thorium-based fuel loadings in the thermal core did not drastically reduce the effective delayed neutron fractions and delayed neutron fractions compared to $UO_2$ fuel. A provided higher conversion factor and lower transuranic production in the research core fed by the thorium-based fuels make the fuel favorable in achieving higher cycle length and less dangerous and costly nuclear disposals.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2660-2669
• /
• 2022

The attractiveness for weapons usage of the proposed fuel cycle for the PT-SCWR was evaluated in this study using the Figure-of-Merit methodology. It was compared to the attractiveness of other fuel cycles namely, Low Enriched Uranium (LEU), U/Th, Re-enriched Reprocessed Uranium (RepU), and Pu/Th/U. The optimal content of natural uranium, which can be added to Pu/Th to render the produced U-233 unattractive, was found to be 9%. A ranking system to compare the attractiveness of the various fuel cycles is proposed. RepU was found to be the most proliferation resistant fuel cycle for the first 100 years,while, the least proliferation resistant fuel cycle was the originally proposed Pu/Th one. The reactivity feedback coefficients were calculated for all proposed fuel cycles. All studied reactivity coefficients have the same sign implying that all the fuel cycles will behave neutronically in a similar way. The Pu/Th/U fuel was found to have the most negative value of the Coolant Void Reactivity which will help to restore the core to a safe status faster in case of a loss-of-coolant accident. The fuel and moderator temperature coefficients did not show significant differences between the fuels studied.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.167-179
• /
• 2024

This study explores the feasibility of employing (U, Th)-based accident tolerant fuels (ATFs), specifically (_0.8UO₂, _0.2ThO₂), (_0.8UN, _0.2ThN), and (_0.8UC, _0.2ThC). The investigation assesses the overall performance of these proposed fuel materials in comparison to the conventional UO₂, focusing on deep neutronic and thermal-hydraulic (Th) analyses. Neutronic analysis utilized the MCNPX code, while COMSOL Multiphysics was employed for thermal-hydraulic analysis. The primary objective of this research is to overcome the limitations associated with traditional UO₂ fuel by exploring alternative fuel materials that offer advantages in terms of abundance and potential improvements in performance and safety. Given the limited abundance of UO₂, long-term sustainable nuclear energy production faces challenges. From a neutronic standpoint, the U-Th based fuels demonstrated remarkable fuel cycle lengths, except (_0.8UN, _0.2ThN), which exhibited the minimum fuel cycle length and, consequently, the lowest fuel burn-up. Regarding thermal-hydraulic performance, (_0.8UN, _0.2ThN) exhibited outstanding performance with significant margins against fuel melting compared to the other materials. Overall, when considering the integrated performance, the most favourable results were obtained with the use of the (_0.8UC, _0.2ThC) fuel configurations. This study contributes valuable insights into the potential benefits of (U, Th)-based ATFs as a promising avenue for enhanced nuclear fuel performance.

• Nuclear Engineering and Technology
• /
• 제49권8호
• /
• pp.1733-1739
• /
• 2017

Molecular dynamics simulations were performed to investigate the uniaxial tensile properties of nanocrystalline $U_{0.5}Th_{0.5}O_2$ solid solution with the Born-Mayer-Huggins potential. The results indicated that the elastic modulus increased linearly with the density relative to a single crystal, but decreased with increasing temperature. The simulated nanocrystalline $U_{0.5}Th_{0.5}O_2$ exhibited a breakdown in the Halle-Petch relation with mean grain size varying from 3.0 nm to 18.0 nm. Moreover, the elastic modulus of $U_{1-y}Th_yO_2$ solid solutions with different content of thorium at 300 K was also studied and the results accorded well with the experimental data available in the literature. In addition, the fracture mode of nanocrystalline $U_{0.5}Th_{0.5}O_2$ was inclined to be ductile because the fracture behavior was preceded by some moderate amount of plastic deformation, which is different from what has been seen earlier in simulations of pure $UO_2$.

• Nuclear Engineering and Technology
• /
• 제50권5호
• /
• pp.794-800
• /
• 2018

The proliferation resistance (PR) of Th/U and Th/Pu fuels used in CANada Deuterium Uranium for the deep geological repository was assessed by combining the multiattribute utility analysis proposed by Chirayath et al., 2015 with the transport model of radionuclides in the repository and comparing with that of the used natural U fuel case. It was found that there was no significant advantage for Th/U and Th/Pu fuels from the viewpoint of the PR in the repository. It was also found that the PR values for used nuclear fuels in the repository of Th/U, Th/Pu, and natural U was comparable with those for enrichment and reprocessing facilities in the pressurized water reactor (PWR) nuclear fuel cycle. On the other hand, the PR values considering the transport of radionuclides in the repository were found to be slightly smaller than those without their transport after the used nuclear fuels started dissolving after 1,000 years.

• Nuclear Engineering and Technology
• /
• 제46권3호
• /
• pp.407-412
• /
• 2014

In this research, we investigated the burnup characteristics and the conversion of fertile $^{232}Th$ into fissile $^{233}U$ in the core of a Sodium-Cooled Fast Reactor (SFR). The SFR fuel assemblies were designed for burning $^{232}Th$ fuel (fuel pin 1) and $^{233}U$ fuel (fuel pin 2) and include mixed minor actinide compositions. Monte Carlo simulations were performed using Serpent Code1.1.19 to compare with CRAM (Chebyshev Rational Approximation Method) and TTA (Transmutation Trajectory Analysis) method in the burnup calculation mode. The total heating power generated in the system was assumed to be 2000 MWth. During the reactor operation period of 600 days, the effective multiplication factor (keff) was between 0.964 and 0.954 and peaking factor is 1.88867.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.1-10
• /
• 2022

This study discusses the effect of using ²³²Th instead of ²³⁸U on the neutronic characteristics and the main operating parameters of the pressurized water reactor (PWR). MCNPX version 2.7 was used to compare the neutronic characteristics of UO₂ with (Th, ²³⁵U)O₂ and (Th, ²³³U) O₂. Firstly, the infinity multiplication factor (K_inf), thermal neutron flux, and power distribution have been studied for the investigated fuel types. Secondly, the effect of Gd₂O₃ and Er₂O₃ on the K_inf and on the radial thermal neutron flux and thermal power has been investigated to distinguish which of them is more suitable than the other in reactivity management. Thirdly, to illustrate the effectiveness of ²³²Th in decreasing the inventory of both the actinides and non-actinides, the concentration of plutonium (Pu) isotopes and minor actinides (MAs) has been simulated with the fuel burnup. Besides, due to their large thermal neutron absorption cross-section, the concentrations of ¹³⁵Xe, ¹⁴⁹Sm, and ¹⁵¹Sm with the fuel burnup have been investigated. Finally, the main safety parameters such as the reactivity worth of the control rods (ρ_CR), the effective delayed neutron fraction β_eff, and the Doppler reactivity coefficient (DRC) were calculated to determine to which extent these fuel types achieve the acceptable limits.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.802-810
• /
• 2020

Three-dimensional finite element simulations are implemented for the in-pile thermo-mechanical behavior in U-Mo/Al monolithic fuel plates with different thermal creep rates of cladding involved. The numerical results indicate that the thickness increment of fuel foil rises with the thermal creep coefficient of cladding. The maximum Mises stress of cladding is reduced by ~85% from 344 MPa on the 98.0^th day when the creep coefficient of cladding increases from 0.01 to 10.0, due to its equivalent thermal creep strain enlarged by 3.5 times. When the thermal creep coefficient of Aluminum cladding increases from 0 to 1.0, the maximum mesoscale stress of fuel foil varies slightly. At the same time, the peak mesoscale normal stress of fuel foil can reach 51 MPa on the 98.0^th day for the thermal creep coefficient of 10, which increases by 60.3% of that with the thermal creep un-occurred in the cladding. The maximum through-thickness creep strain components of fuel foil differ slightly for different thermal creep coefficients of cladding. The dangerous region of fuel foil becomes much closer to the heavily irradiated side when the creep coefficient of cladding becomes 10.0. The creep performance of Aluminum cladding should be optimized for the integrity of monolithic fuel plates.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1156-1163
• /
• 2020

Fuel temperature coefficient (FTC) of PuO₂+ZrO₂ (ROX) fueled LWR cell is analyzed neutronically with reactor- and weapons-grade plutonium fuels in comparison with a U-free PuO₂+ThO₂ (TOX), and a conventional MOX fuel cells. The FTC value of a ROX fueled LWR is smaller compared to a TOX or a MOX fueled LWRs and becomes extremely positive especially, at EOL. This is because when fuel temperature is increased, thermal neutron spectrum is shifted to harder, which is extreme at EOL in ROX fuel than that in TOX and MOX fuels. Consequently at EOL, ²³⁹Pu and ²⁴¹Pu contributes to positive fuel temperature reactivity (FTR) in ROX fuel, while they have negative contribution in TOX and MOX fuels. The FTC problem of ROX fuel is mitigated by additive ThO₂, UO₂ or Er₂O₃. In ROX-additive fuel, the atomic density of fissile Pu becomes more than additive free ROX fuel especially at EOL, which is the main cause to improve the FTC problem. The density of fissile Pu is more effective to decrease the thermal spectrum shifts with increase the fuel temperature than additive ThO₂, UO₂ or Er₂O₃ in ROX fuel.