• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.8
• /
• pp.1192-1201
• /
• 2016

This study was conducted to investigate sensory characteristics and consumer acceptance of sliced raw fish. The two most popular varieties in Korea, flounder and rockfish, were used. Samples of each variety were prepared as follows to create consistent perceptible sensory differences: 'fresh' (consumed within 2 h after sacrifice), 'aged' (stored at $1^{\circ}C$ for 24 h), 'frozen' (frozen at $-16^{\circ}C$ for 23 h then thawed at $23.5^{\circ}C$for 1 h), and 'immersed' (immersed in sterilized water at $1^{\circ}C$ for 24 h). Sensory profiles of samples were determined through quantitative descriptive analysis using 10 trained panelists. Consumer acceptance test was conducted using 47 consumers. Analyses of variance were conducted to test significance of differences in sensory profiles and hedonic ratings among samples. Consumers were clustered according to their overall liking scores, and their preference patterns were cross-checked with sensory profiles. For both fish varieties, 'fresh' was characterized by stronger hardness, cohesiveness, springiness, cartilage-like texture (applied to only rockfish), and fishy flavor, whereas 'frozen' and 'immersed' were distinguished from other samples for their stronger wetness, juiciness, and fresh fish flavor than those of other samples. 'Aged' was significantly less hard, cohesive, and springy than 'fresh' as well as less juicy and wet than 'frozen' and 'immersed'. Consumers significantly preferred 'fresh' flounder and rockfish to others for their strong cohesiveness and springiness, indicating textural attributes were main factors affecting consumer preferences. However, for both flounder and rockfish, 40~50% of respondents preferred 'frozen' and 'immersed' to 'fresh' for their tenderness and fresh fish flavor. For this group of consumers, flavor liking had a greater effect on overall preference than texture preference. The result suggests that cohesive and springy textures and fresh fish flavor are major drivers of preferences for raw fish slices, but their relative importance and optimal levels varied across individual consumers.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.4
• /
• pp.282-287
• /
• 1999

This study was conducted to investigate the effects of different soil texture in agronomic characteristics, root yield and quality of baloon flower (Platycodon grandiflorum A. DC.). Three kinds of soil texture, sandy loam, silt loam and clay loam, were tested for two years. Baloon flowers were seeded with 20cm row space and cultivated in the one square meter pot with 0. 6m depth. Fifty plants per pot were remained. In growth characteristics of one-year-old plants, shooting date was not significantly different according to the changes of soil texture. The ratio of stem growth was highest between July and August. In two-years-old plants, it was showed between May and June. Plants grown on clay loam showed the highest growing characteristics than those of other soil textures. Dry root weight cultivated on clay loam was 274kg/10a in one-year-old and 934kg/10a in two-years-old plants. The content of ethanol extracts from root was highest at those of sandy loam as 47.1 % in one-year-old root. The crude saponin content was not different significantly among the three kinds of soil texture.

• Conservation Science in Museum
• /
• v.16
• /
• pp.4-13
• /
• 2015

In most gold objects crafted using the granulation technique that have been thus far discovered in the Korean Peninsula, granules were joined using a soldering alloy of gold and silver. However, it was recently revealed through SEM-EDS analysis performed on the ornamented dagger sheath from Gyerim-ro Tomb No.14 in Gyeongju that the gold granules were joined to the surface of this sheath using an entirely different technique. The gold granules on the Gyerim-ro dagger sheath are evenly sized and shaped, the surface has a dendritic texture. Dendritic textures are a characteristic feature of metal alloys, not observed in pure metals. As a matter of fact, the gold granules were made of a ternary alloy of 77wt% Au, 18wt% Ag and 4wt% Cu. Due to this component, the alloy has a melting point below 1000℃ (approximately 980℃), which is significantly lower than 1064℃, the melting temperature of pure gold. This makes it possible to join the gold granules directly to the surface of the sheath by briefly heating them to high temperature, without the use of soldering or any other media. When examined through SEM image, the surface of the sheath showed no traces of soldering, it suggests that the granules were joined through unaided fusion.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.1
• /
• pp.1-15
• /
• 2008

The Cretaceous Gajok gold-silver deposit within porphyry granite is located nearby the Cretaceous Pungam basin at the northeastern area in Republic of Korea. The Gajok gold-silver deposit is distinctively composed of a multiple-complex hydrothermal veins with comb, crustiform chalcedony quartz and vug textures, implying it was formed relatively shallower depth. The hypogene open-space filling veins could be divided into 5 paragenetic sequences, increasing tendency of Ag-rich electrum and Ag-phases with increasing paragenetic time. Electrum with high gold contents (${\sim}50$ atomic % Au) as well as sphalerite with high FeS contents (${\sim}6$ mole % FeS) are representative ore minerals in the middle stage. The late stage is characterized by silver-phase such like native silver and/or argentite, coexisting with Ag-rich electrum ($10{\sim}30$ atomic % Au) and Fe-poor sphalerite (< 1 mole % FeS). The ore-forming fluids evolution started at relatively high temperature and salinity (${\sim}360^{\circ}C$, ${\sim}7\;wt.%$ eq. NaCl) and were evolved by dilution and mixing mechanisms on the basis of fluid inclusion study. The gold-silver mineralization proceeded from ore-forming fluids containing greater amounts of less-evolved meteoric waters(${\delta}^{18}O$; $-0.6{\sim}-6.7\;%o$). These results imply that gold-silver mineralization of the Cretaceous Gaiok deposit formed at shallow-crustal level and could be categorized into low-sulfidation epithermal type, related to Cretaceous igneous activity.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.2
• /
• pp.163-176
• /
• 2009

The pyrophyllite deposits located in Jinhae area have been studied through field observations and laboratory works including the X-ray diffraction (XRD), X-ray fluorescence (XRF), Electron probe microanalyzer (EPMA) and Inductively Coupled Plasma (ICP). The pyrophyllite deposits consist of mainly illite, dickite, pyrophyllite, diaspore, chlorite, pyrite and copiapite. According to the mineral assemblages, geological occurrences and alteration modes, the altered rocks can be classified into four types: Type A; quartz with silicifictaion, Type B; quartz + illite with illitization, Type C; quartz + dickite + illite with kaolin alteration, Type D; pyrophyllite + illite + dickite + diaspore with pyrophyllite alteraion. Rocks in Type A, which is generated by silicifictaion, have high $SiO_2$ contents more than 90 wt% and distinctive equigranular textures with microcrtstalline quartz. The pyrophyllites from the study area belong to 2M polytype. The host rocks of the pyrophyllite ore in this mine are rhyolitic rock, andecitic tuff and volcanic breccia. The alteration products seem to be controlled by the different lithology of the host rocks. The hydrothermal solution formed the deposits would be inferred to the acidic and have relatively high ionic activity of hydrogen and silica judging from alteration mineral assemblage. Pyrophyllite alteraion zone is generated by highest temperature condition of all alteration zone.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.193-213
• /
• 1995

The purpose of this study is to investigate a possible contribution of nonspecific esterases, which occur in the oral cavity, to the degradation of ester bonds in polymethacrylates. One of the problems connected with the use of composite resins for restorations is their inadequate resistance to wear. It has been shown that methacrylate hydrolysis can be catalyzed by enzymes and that a carboxylic hydrolase (porcine liver esterase) catalyzed the hydrolysis of several mono - and dimethacrylates. The softening effect on a BISGMA/TEGDMA polymer induced by hydrolase will accelerate the in vivo wear of the polymer. Porcine liver esterase (EC 3.1.1.1) 3.2 mol/L $(NH_4)_2$ $SO_4$ was obtained from Sigma Chemical Company. The esterase activity of one unit is defined as the amount of enzyme capable of hydrolyzing $l{\mu}mol$ ethyl butyrate per min at pH 8.0 AT $25^{\circ}C$. Phosphate buffer, 10mmol/L, pH 7.0, was made by adjustment of a solution of $Na_2HPO_4$ with $H_3PO_4$. Composite resins used in this study are Silux Plus, Z-100, Durafil VS, and Prisma APH. Cylindrical specimens, 14mm in diameter and 3mm thick, of Silux Plus, Z-100, Durafil VS, Prisma APH were polymerized under the celluloid strip. 60 specimens were divided into 2 groups. One group was emersed only in buffer solution, the other group was emersed in buffer and enzyme solution. Silux Plus and Z-100 were divided into 2 subgroups, one subgroup was cured only Visilux 2. And the other subgroup was cured Visilux 2 and Triaid II. Thereafter, specimens were polished to its best achievable surface according to manufacture's directions. The Vickers hardness of the specimens was measured after 1, 2, 4, 7, 9, 15, 50 days. The solutions were changed after each measurement. Composite resin surfaces were evaluated for the surface roughness with profilometer (${\alpha}$-step 200, Tencor instruments, USA) after 1 and 50 days. And then surfaces of specimens were pictured with stereosopy after 1 and 50 days. The results were as follows. 1. The surface hardness of Silux plus, durafil VS, and Prisma APH were decreased with time. But, the surface hardness of Z-100 was not decreased. 2. The surface hardness of all composite resins was decreased by esterase. 3. Composite resins, which were light-cured by Visilux 2 and concomitantly baked by oven, showed more hardened surface than light-cured by Visilux 2 only. 4. Significant surface changes were occured in Silux plus after esterase treatment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.2 no.2
• /
• pp.155-160
• /
• 1969

The soil textures and chemical compositions of Tapes Philippinarum beds were investigated in order to estimate the grade of the habitat soil of T. Philippinarum for the improvement of natural tidal flats. The coefficients of correlation between tile percentages of debris, coarse sand, fine sand, silt, and clay of the habitat soil, and the population density of T. Philippinarum were 0.78, 0.73, -0.42, -0.68, and -0.51 respectively. And the optimum levels of same were above $13.5\%,\;above\;23.0\%\;below\;41.5\%,\;below\;10.0\%$, and below $6.8\%$ respectively The $SiO_2\;Al_2O_3+Fe_2O_3$ ratio of the soil of T. Philippinarum beds showed the range of 5.09 to 5.60. The levels of soil pH, water holding capacity, organic matter, total nitrogen, available phosphorus, exchangeable magnesium were 6.15-6.60, $4.26-6.86\%$, $0.40-1.10\%$ 14.0-27.0 ppm, $0.041-0.394\%,\;and\;0.009-0.132\%$ respectively.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.3
• /
• pp.164-168
• /
• 2014

BACKGROUND: Increase in application of liquid pig manure(LPM) in agriculture as nutritional source has become a social issue due to its influence on water quality. Also, proper application methods have not been developed with respect to indigenous properties of LPM and soil physical properties. Therefore, we conducted this experiment to observe the infiltration characteristics and distribution of dissolved organic compounds of LPM in soils having different soil textures. METHODS AND RESULTS: To do this experiment, we collected three different soils and LPM. We analyzed the physical and chemical properties of both soils and LPM to determine the dilution ratios of LPM. The LPM diluted to 4 different ratios with distilled water was applied to the top of soil column. Infiltration rates were observed by time and depth until the amount of effluent collected from the bottom of the soil columns were stabilized while maintaining the hydraulic head 3 cm above the soil column. The results showed that infiltration rates increased with increasing dilution ratios in the order of sandy, loamy sand, and sandy loam. The time required to reach steady state was increased with decreasing sand contents clay. CONCLUSION: The size and amount of the dissolved organic compounds in LPM that can determine the efficiency as fertilizer and environmental problems as nonpoint pollution source in water quality have not been investigated with respect to behavior and transport of them in soil. Therefore, it requires further research how we can properly apply LPM as valuable fertilizer substitute for inorganic fertilizers.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.3
• /
• pp.63-74
• /
• 2005

The cinema costume designers carry out the creative works in a different way from the commercial fashion designers generating the new trends by season or year for a number of people. Costumes created by the cinema costume designers are for the people acting in the film screens such as heroes, heroines or extras. The cinema costume designers should not miss the overall flow of a cinema. Moreover, the prominent designers have to devise the costumes livening up every scene. Most cinemas with the prudent interests and attention on the costumes are favored by the public and gain the commercial success. In particular, the cinemas emphasize the visual effects such as setting, lighting and computer graphics and require the substantial budgets for preparing the costumes regardless of genres, while all other industrial fields will be the same. Such efforts are to deliver the meaning and aesthetics that the cinemas intend to show through the designs, colors and textures of costumes closed up in each scene. The costumes in cinemas are another linguistic system and have the symbolic form of compound and meaningful communication used by the directors. The costume design is required to produce the costumes that liven up the characteristics of heroes or heroines as well as to fit for the general artistic effects of films. Moreover, it has to express the characters in the films using the costumes suitable for the film genres. Cinema costumes are defined and refined, and the process can be angst-ridden. Each frame of film is a canvas and has its own proscenuium. Every garment worn in a theatrical production is a costume. Before an actor speaks, his wardrobe has already spoken for him. From the most obvious and flamboyant show clothing, to contemporary clothes using subtle design language, costume design plays an integral part in every film production. Costume design is a vital tool for storytelling. Costumes have always had enormous influence on world fashion. Costume designers are passionate storytellers, historians, social commentators, humorists, psychologists, trendsetters and magicians who can conjure glamour and codify icons. Costume designers are project managers who have to juggle ever-decreasing wardrobe budgets and battle the economic realities of film production. Costume designers are artists with pen and paper, form, fabric and the human figure.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.4 s.42
• /
• pp.195-211
• /
• 2005

The Kusandong Tuff, known as a representative key bed in the Cretaceous Gyeongsang Basin, is a crystal-rich tuff of pyroclastic flow and surge origin. It is 1-4 m thick and laterally extends for more than 200 km intercalated in the upper part of the Hayang Croup. Observations and analyses of the feldspar crystals in the tuff, using polarizing microscopes, EPMA, and BSE images, reveal that the plagioclase crystals in the tuff were completely albitized (>$97\%$ Ab) whereas those in the southernmost localities where the tuff is rich in fine ash matrix are unaltered or partly albitized. K-feldspars are partly albitized at all localities, irrespective of the matrix content of the tuff, Perthitic textures, chessboard twinning, albitization along micro-fractures and cleavages, and the relationship between matrix content and the degree of albitization suggest that feldspars in the Kusandong Tuff were albitized by Na-rich fluid after burial. Albitization is interpreted to start preferentially along micro-fractures and cleavages and be hampered in matrix-rich tuffs with a low permeability. Original composition of the plagioclases in the Kusandong Tuff is also interpreted to have ranged between oligoclase and andesine ($Ab_{62.5}-Ab_{83.3}$) before the albitization.