• Journal of Korean Society of Forest Science
• /
• v.66 no.1
• /
• pp.16-36
• /
• 1984

It is very important in forestry to study the shear strength of weathered granitic soil, because the soil covers 66% of our country, and because the majority of land slides have been occured in the soil. In general, the causes of land slide can be classified both the external and internal factors. The external factors are known as vegetations, geography and climate, but internal factors are known as engineering properties originated from parent rocks and weathering. Soil engineering properties are controlled by the skeleton structure, texture, consistency, cohesion, permeability, water content, mineral components, porosity and density etc. of soils. And the effects of these internal factors on sliding down summarize as resistance, shear strength, against silding of soil mass. Shear strength basically depends upon effective stress, kinds of soils, density (void ratio), water content, the structure and arrangement of soil particles, among the properties. But these elements of shear strength work not all alone, but together. The purpose of this thesis is to clarify the characteristics of shear strength and the related elements, such as water content ($w_o$), void ratio($e_o$), dry density (${\gamma}_d$) and specific gravity ($G_s$), and the interrelationship among related elements in order to decide the dominant element chiefly influencing on shear strength in natural/undisturbed state of weathered granitic soil, in addition to the characteristics of soil hardness of weathered granitic soil and root distribution of Pinus rigida Mill and Pinus rigida ${\times}$ taeda planted in erosion-controlled lands. For the characteristics of shear strength of weathered granitic soil and the related elements of shear strength, three sites were selected from Kwangju district. The outlines of sampling sites in the district were: average specific gravity, 2.63 ~ 2.79; average natural water content, 24.3 ~ 28.3%; average dry density, $1.31{\sim}1.43g/cm^3$, average void ratio, 0.93 ~ 1.001 ; cohesion, $ 0.2{\sim}0.75kg/cm^2$ ; angle of internal friction, $29^{\circ}{\sim}45^{\circ}$ ; soil texture, SL. The shear strength of the soil in different sites was measured by a direct shear apparatus (type B; shear box size, $62.5{\times}20mm$; ${\sigma}$, $1.434kg/cm^2$; speed, 1/100mm/min.). For the related element analyses, water content was moderated through a series of drainage experiments with 4 levels of drainage period, specific gravity was measured by KS F 308, analysis of particle size distribution, by KS F 2302 and soil samples were dried at $110{\pm}5^{\circ}C$ for more than 12 hours in dry oven. Soil hardness represents physical properties, such as particle size distribution, porosity, bulk density and water content of soil, and test of the hardness by soil hardness tester is the simplest approach and totally indicative method to grasp the mechanical properties of soil. It is important to understand the mechanical properties of soil as well as the chemical in order to realize the fundamental phenomena in the growth and the distribution of tree roots. The writer intended to study the correlation between the soil hardness and the distribution of tree roots of Pinus rigida Mill. planted in 1966 and Pinus rigida ${\times}$ taeda in 199 to 1960 in the denuded forest lands with and after several erosion control works. The soil texture of the sites investigated was SL originated from weathered granitic soil. The former is situated at Py$\ddot{o}$ngchangri, Ky$\ddot{o}$m-my$\ddot{o}$n, Kogs$\ddot{o}$ng-gun, Ch$\ddot{o}$llanam-do (3.63 ha; slope, $17^{\circ}{\sim}41^{\circ}$ soil depth, thin or medium; humidity, dry or optimum; height, 5.66/3.73 ~ 7.63 m; D.B.H., 9.7/8.00 ~ 12.00 cm) and the Latter at changun-long Kwangju-shi (3.50 ha; slope, $12^{\circ}{\sim}23^{\circ}$; soil depth, thin; humidity, dry; height, 10.47/7.3 ~ 12.79 m; D.B.H., 16.94/14.3 ~ 19.4 cm).The sampling areas were 24quadrats ($10m{\times}10m$) in the former area and 12 in the latter expanding from summit to foot. Each sampling trees for hardness test and investigation of root distribution were selected by purposive selection and soil profiles of these trees were made at the downward distance of 50 cm from the trees, at each quadrat. Soil layers of the profile were separated by the distance of 10 cm from the surface (layer I, II, ... ...). Soil hardness was measured with Yamanaka soil hardness tester and indicated as indicated soil hardness at the different soil layers. The distribution of tree root number per unit area in different soil depth was investigated, and the relationship between the soil hardness and the number of tree roots was discussed. The results obtained from the experiments are summarized as follows. 1. Analyses of simple relationship between shear strength and elements of shear strength, water content ($w_o$), void ratio ($e_o$), dry density (${\gamma}_d$) and specific gravity ($G_s$). 1) Negative correlation coefficients were recognized between shear strength and water content. and shear strength and void ratio. 2) Positive correlation coefficients were recognized between shear strength and dry density. 3) The correlation coefficients between shear strength and specific gravity were not significant. 2. Analyses of partial and multiple correlation coefficients between shear strength and the related elements: 1) From the analyses of the partial correlation coefficients among water content ($x_1$), void ratio ($x_2$), and dry density ($x_3$), the direct effect of the water content on shear strength was the highest, and effect on shear strength was in order of void ratio and dry density. Similar trend was recognized from the results of multiple correlation coefficient analyses. 2) Multiple linear regression equations derived from two independent variables, water content ($x_1$ and dry density ($x_2$) were found to be ineffective in estimating shear strength ($\hat{Y}$). However, the simple linear regression equations with an independent variable, water content (x) were highly efficient to estimate shear strength ($\hat{Y}$) with relatively high fitness. 3. A relationship between soil hardness and the distribution of root number: 1) The soil hardness increased proportionally to the soil depth. Negative correlation coefficients were recognized between indicated soil hardness and the number of tree roots in both plantations. 2) The majority of tree roots of Pinus rigida Mill and Pinus rigida ${\times}$ taeda planted in erosion-controlled lands distributed at 20 cm deep from the surface. 3) Simple linear regression equations were derived from indicated hardness (x) and the number of tree roots (Y) to estimate root numbers in both plantations.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.9
• /
• pp.1339-1346
• /
• 2015

In a previous study, baekseolgi with xylitol or sucralose was comparable to baekseolgi with sugar in terms of all sensory characteristics. However, the hardness of sucralose baekseolgi increased considerably during storage while that of xylitol baekseolgi remained unchanged. To improve the physical limitations observed in sucralose baekseolgi, a combination of sucralose and xylitol were substituted for sugar when preparing baekseolgi (SL0~SL100, SLn; baekseolgi where sugar was replaced with n% sucralose and 100-n% xylitol based on relative sweetness to sugar). All SLn baekseolgi samples were not significantly different from sugar baekseolgi in terms of sensory properties. The moisture content was not different between sugar and xylitol baekseolgi (SL0), but decreased significantly as the amount of sucralose increased (P<0.01), which correlated with cohesiveness of baekseolgi. Texture profile analysis revealed that hardness of SLn baekseolgi increased without any noticeable change in moisture content after storage at $4^{\circ}C$ for 7 days. In addition, the hardness after storage was the highest in sucralose baekseolgi (SL100), which was comparatively lower in SL0~SL80 containing xylitol presumably due to the hygroscopic characteristics of xylitol. In particular, SL20 was found to be comparable to sugar baekseolgi in terms of moisture and cohesiveness during storage. The results showed that the combination of xylitol and sucralose could be a potential sugar substitute in terms of not only sensory characteristics but also physicochemical properties.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.2
• /
• pp.209-214
• /
• 2016

The aim of this study was to investigate the effects of pork skin gelatin on the physicochemical properties (pH, CIE color value, water holding capacity, cooking yield, viscosity, proximate composition, and texture profile analysis) of emulsion-type sausage. Emulsion-type sausages were manufactured with 0% (control), 1%, 3%, and 5% pork skin gelatin. Moisture contents of samples containing 3% and 5% pork skin gelatin were significantly higher than those of the control and samples containing 1% pork skin gelatin (P<0.05). Protein contents were the highest in samples containing 5% pork skin gelatin (P<0.05). The pH values of uncooked and cooked samples increased with increasing pork skin gelatin level (P<0.05). The lightness and yellowness values of cooked samples containing pork skin gelatin were higher than those of the control (P<0.05). In addition, redness values of cooked samples containing 3% and 5% pork skin gelatin were significantly lower than those of the control and samples containing 1% pork skin gelatin (P<0.05). Water holding capacity (WHC) was the lowest in control, and samples containing 3% and 5% pork skin gelatin had significantly higher WHC compared to the other samples (P<0.05). Cooking yield of samples increased with increasing concentration of pork skin gelatin (P<0.05). Samples containing 3% and 5% pork skin gelatin showed higher viscosity than the control and sample containing 1% pork skin gelatin (P<0.05). Springiness, cohesiveness, and chewiness of samples were not significantly different among the samples. Hardness values of the control and sample containing 1% pork skin gelatin were lower than those of other samples (P<0.05), and samples containing 5% pork skin gelatin had the highest hardness (P<0.05). Gumminess of sample containing 5% pork skin gelatin was significantly higher than that of the control (P<0.05). The results show that pork skin gelatin could improve the potential of emulsion-type sausage physicochemical properties.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.4
• /
• pp.551-556
• /
• 2016

This study was conducted to investigate the effects of NaCl concentration on the physicochemical properties of pork emulsion. Pork emulsion was produced containing 0% (control), 0.3%, 0.6%, 0.9%, 1.2%, and 1.5% NaCl. Proximate composition of pork emulsion containing 1.5% NaCl showed the highest moisture content (P<0.05). The ash contents of pork emulsion increased with an increase in NaCl, and protein contents decreased with increasing NaCl concentration. The pH levels of uncooked pork emulsion containing 0.9%, 1.2%, and 1.5% NaCl were lower than those of other treatments (P<0.05), and the pH level of cooked pork emulsion containing NaCl was lower than that of the control (P<0.05). The CIE $L^*$ value of the uncooked pork emulsion samples containing NaCl was higher than that of the control (P<0.05), whereas CIE $a^*$ and CIE $b^*$ values of samples with NaCl were lower than the control (P<0.05). CIE $L^*$ and CIE $b^*$ values of cooked pork emulsion decreased with an increase in NaCl level, and CIE $a^*$ value increased with increasing NaCl concentration (P<0.05). Viscosity of the pork emulsion increased with an increase in NaCl. Texture profile analysis of pork emulsion containing NaCl showed no significant difference in springiness or cohesiveness (P>0.05). Pork emulsion containing 1.5% NaCl showed the highest hardness, gumminess, and chewiness (P<0.05). These results suggest that pork emulsion containing 0.9% and 1.2% NaCl can be used as a low-salt meat product.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.1
• /
• pp.105-110
• /
• 2009

The effects of heat treated and herb added garlic (Allium sativum L.) on the antioxidant activities were investigated. Boiling ($100^{\circ}C$, 60 min), steaming ($100^{\circ}C$, 30 min), baking ($120^{\circ}C$, 10 min), or high temperature and high pressure (HTHP, $120^{\circ}C$, 20 min, 1.5 kgf/$cm^2$) were applied, and several herbs were added to garlic. Hunter color L-value of heated garlic was significantly decreased, compared to that of control (fresh garlic), whereas a-value and b-value were increased (p<0.05). In the texture profile analysis, hardness, chewiness and gumminess of heated garlic were decreased, whereas adhesiveness was increased. The antioxidant activities determined by DPPH and hydroxyl radical scavenging activities were decreased in HTHP garlic. The pungent taste and garlic odor were the weakest in HTHP garlic. Especially, the pungent taste of HTHP garlic was not detectable. Green tea among several herbs (bay leaf, cinnamon bark, pine needles) showed the highest DPPH radical scavenging activity. Addition of green tea to HTHP garlic was appropriate for decreasing antioxidative activity of HTHP garlic compared to fresh garlic. Based on these results, it was suggested that high temperature and high pressure treated garlic with green tea might be very useful as a substitute for odorless functional garlic products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.8
• /
• pp.1274-1283
• /
• 2005

The sensory acceptability, texture profile analysis and nutritional evaluation were peformed in Korean traditional mungbean pancake (MPC) and modified MPC containing squid meat and soybean to standardize the recipes for healthy fast food market potentiality. Optimal ingredient formulations were revealed as mung-bean 55$\%$, pork 13$\%$ and vegetables 32$ \%$ for traditional MPC, and pork 3$\%$, squid 42$\%$ and soybean 55$\%$ for modified MPC using response surface methodology. Flavor and hardness correlated highly with overall accept-ability rather than appearance and color of traditional MPC. Higher squid levels raised adhesiveness, springi-ness and resiliences of modified MPC, but soybean decreased these textural attributes. Protein, lipid and total calorie of modified MPC were lower than those of traditional MPC. Computed protein efficiency ratio (C-PER) and degree of gelatinization of modified MPC were superior than traditional MPC.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.721-728
• /
• 2005

The physicochemical and microbial characteristics of pickled cucumber prepared with dry salting method, which has been used for industry, were investigated. Salting and storage conditions were HSHT $(30\%,\;25^{\circ}C)$, MSMT $(21\%,\;15^{\circ}C)$, MSLT $(21\%,\;0^{\circ}C)$, LSMT $(15\%,\;15^{\circ}C)$ and LSLT $(15\%,\;0^{\circ}C)$. Acidity was lower, and pH was higher in higher salt concentration as well as lower temperature groups. At the storage of 165 days, acidity and pH reached to $0.21\%$ and 4, respectively in MSLT and HSHT, of which conditions fermentation was retarded, compared to the other groups. During storage of pickled cucumber, greenness (-a) of Hunter color system showed the highest in MSLT ranged from -10.70 to -8.08, while in LSMT, the lowest to 1.17. Total microbial and lactic acid bacteria number in HTST and MSLT were the lowest than in other groups, while tile highest in LSMT. Yeast was not detected in HSHT and MSLT after 36 days of storage, while higher in LSMT Texture profile analysis exhibited that fracturability (2,318 g and 2,318 g) and hardness (849 g and 702 g) were highest in HSHT and MSLT, compared to the other groups. Scores of over-all preference for MSLT and LSLT were higher with 8.8 and 7.6, respectively, compared to the other products (p<0.05). Based on these results, lower saltiness and lower storage temperature condition was better for pickled cucumber preparation in industry.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.1
• /
• pp.1-7
• /
• 2010

This study was carried out to investigate plow pan characteristics and to grasp the relationship between its particle size distribution fractal dimension ($D_m$) and water transport in paddy plow pan. Twenty four soil sampling sites with different management groups, ordinary and sandy-textured, were selected and investigated for physical properties of soils such as Yamanaka hardness in April, non-submerged condition, before rice seedling transplanting. The plow pan appearing depth and thickness was determined by penetration resistance profile. Undisturbed core samples with five replicates were sampled at plow pan layerwith 2 inch cores for measuring soil bulk density and saturated hydraulic conductivity. The particle size distribution fractal dimension ($D_m$) was calculated by the method following the procedure Tylerand Wheacraft (1992), using the USDA-based particle size analysis datawith fractions of 0-0.002, 0.002-0.053, 0.053-0.1, 0.1-0.25, 0.25-0.5, 0.5-1.0, and 1.0-2.0 mm. The plow pan of investigated fields appeared at a range from 5 to 30 cm depth, showing minimum value in sandy-textured management group and maximum value in ordinary management group. The thickness of plow pan were distributed from 5 to 17 cm, showing both minimum and maximum values in sandy-textured management group. Averagely, the plow appearing depth were deeper in ordinary management group than in sandy-textured management group, whereas the reverse in the thickness of plow pan. The particle size distribution fractal dimension ($D_m$) had higher value with finer textures, with higher fractality in coarser texture. Saturated hydraulic conductivities, $K_s$, of plow pan soils distributed from 0.5 to 1420 mm $day^{-1}$, having the highest value in sandy skeletal soils. The $K_s$ decreased with decreasing clay content and $D_m$, showing power function relationships. The coefficient of determination, $R^2$, of the fitted power functions were higher in $D_m$ as x-axis than in clay content. This means that $D_m$ could give us more effective estimation than clay content. Especially, sandy-textured paddy soils had higher $R^2$, compared to ordinary paddy soils. $K_s$ of relatively coarse-textured soils with less than 18%of clay content, therefore, was more dependent on particle size distribution than that of relatively fine-textured soils. From these results, it could be concluded that the fractal scaling gives us a unique quantity describing particle size distribution and then can be applied to estimate saturated hydraulic conductivity, especially more effective in coarse-textured soils.