• Food Science and Preservation
• /
• v.14 no.6
• /
• pp.571-577
• /
• 2007

Storage characteristics of fresh and thawed sliced raw fish (flounder and rockfish) washed in different solutions (tap water, A; jade water, B; 0.2% chitosan-ascorbate (CA), C; 0.03 ppm ozone water, D; 1.5% vinegar containing jade water, E; 1.5% vinegar and 0.2% CA containing jade water, F) at $10^{\circ}C$ were investigated. Changes in pH and acidity of thawed sliced raw fish (TS) during storage were lower than for fresh sliced raw fish (DS). The total microbial content (log cfu/g) of A stored for 3 days in DS was 6.7 (which represented an increase of 1 log cycle compared with day zero), but was 5.50 in B, 3.23 in C, 4.90 in D, 2.40 in E and 1.77 in F, the latter similar to counts at day zero. The degree of microbial contamination of DS and TS followed the order F > E > D > C > B > A in flounder, and F > E > C > D > B > A in rockfish. In general the hardness and chewiness of TS was less than for DS. While the effect of CA on TS texture was not significant in flounder, the effect showed in rockfish. For DS, the appearance in B, C and D was relatively good, as was freshness. Fishiness of flavor was in the order A > B > F > E > D > C. Overall acceptability of flounder and rockfish treated with C was better than treatment with the other washing agents. For TS the appearance of flounder and rockfish were good in B and C. The freshness of flounder and rockfish were in the order of D > C > B > A > E > F and D > C > B > A > E > F, respectively. Fishiness of the flavor of sliced raw fish was lowest in D, which also provided the best overall acceptability.

• Food Science and Preservation
• /
• v.23 no.7
• /
• pp.1058-1064
• /
• 2016

This study investigated the correlation between physicochemical (color, soluble solids content (SSC), pH, titratable acidity (TA), and firmness) and sensory (appearance, taste, odor, and texture) characteristics of environment-friendly 'Campbell early' grapes to identify quality indices. For analysis, samples of similar-sized grapes were collected from five orchards. The results showed that the physicochemical characteristics of CIE $L^*$, CIE $a^*/b^*$, SSC, pH, TA, and firmness and the sensorial characteristics of color intensity, freshness of stem, odor, sourness, sweetness, and elasticity were different among groups. Correlation analysis results showed that an increase in sweetness and firmness and a decrease in sourness were associated with an increase in overall acceptance. Sourness and sweetness were positively correlated with CIE $L^*$ (r=0.88) and firmness (r=0.95), individually. In the principal component analysis results, component F1 and F2 explained 44.35% and 33.77%, respectively, of the total variance (78.12%). F1 represented firmness, sweetness, elasticity, hardness, grape odor, color intensity, sweet odor, sourness, and damage degree. F2 represented CIE $L^*$, TA, CIE $a^*$, CIE $a^*/b^*$, SSC/TA, SSC, and peel thickness. The results showed that consumer acceptance of 'Campbell early' grapes can be determined by assessing physicochemical attributes of firmness, CIE $L^*$, TA, CIE $a^*$, CIE $a^*/b^*$, SSC/TA, and SSC and various sensorial attributes including sweetness, fruit elasticity, fruit hardness, grape odor, and color intensity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.2
• /
• pp.113-118
• /
• 2016

This experiment was conducted to identify the variations in inorganic nutrients and plant growth in millet (Panicum miliaceum L.) due to soil salinity. The soil series was Munpo and soil texture was silt loam. The experimental soil was amended so that the soil had salinities of $0.8dS\;m^{-1}$, $1.6dS\;m^{-1}$, $3.2dS\;m^{-1}$ and $4.8dS\;m^{-1}$. Millet was transplanted 15 days after sowing. As soil salinity increased, the degree of reduced growth was in the order of seed production > root dry matter > plant dry matter > culm length > tiller number > stem thickness > Panicle length. Seed production was decreased to 18.9% in soil salinity of $1.6dS\;m^{-1}$, 36.9% in of $3.2dS\;m^{-1}$, and 50.7% in EC of $4.8dS\;m^{-1}$. Root dry matter decreased to 35.8% in EC of $3.2dS\;m^{-1}$, and to 40.5% in EC of $4.8dS\;m^{-1}$. As soil salinity increased, Total nitrogen content increased in all aboveground parts, roots and seeds. However, There was no difference in CaO, $P_2O_5$, $K_2O$ and, MgO in soils of different salinity. On the other hand, $Na_2O$ content was higher in the order roots> shoots> seed, and in the case of roots, $Na_2O$ content increased to 1.02% in soil salinity of $4.8dS\;m^{-1}$. However, up to soil salinity of $1.6dS\;m^{-1}$, the $Na_2O$ content of the seed was similar to that in plant grown in the Control conditions($0.8dS\;m^{-1}$). In conclusion, taking into consideration economic factors, millet could be cultivated in soil with salinities of up to approximately $1.6dS\;m^{-1}$, and seed produced from reclaimedland would be suitable for human consumption.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.6
• /
• pp.357-365
• /
• 2006

The investigations were conducted to find out the situation of fertilizer use and the contents of soil chemical components on summer vegetable crops at 791 farmers' upland fields located in the parts of Gangwon-do, Gyengsangbuk-do and Jeollabuk-do of alpine area. Major vegetable crops were potato, Chinese cabbage, radish, carrot, onion, and cabbage. From the location surroundings cultivated alpine vegetable crops, the orders were Gangwon-do>Gyeongsangbuk-do>Jeollabuk-do part in the sizes of a fie1d area and the height above sea level, and Jeollabuk-do>Gyeongsangbuk-do>Gangwon-do part in the slope degrees. The soil texture was of wide distribution on sandy loam soil for Gangwon-do(76%) and Jeollabuk-do part(64%), and 1oam(42%) and sandy loam soil(35%) for Gyeongsangbuk-do part. From the numbers of investigated fields, the distribution of slope degree was wider than those of height above sea level in relation to location surroundings. The upland soils of 785 fields cultivated vegetable crops were sampled at 0~15 cm of top soil before seeding or transplanting and analyzed. On an average, pH, organic matter, available phosphate and exchangeable potassium, calcium, magnesium of soil were 5.7, $27.6g\;kg^{-1}$, $765mg\;kg^{-1}$, $1.16cmol_c\;kg^{-1}$, $6.1cmol_c\;kg^{-1}$, and $1.6cmol_c\;kg^{-1}$, respectively. The average cation exchange capacity(CEC) of 120 sites in Gangwon-do part was $9.2cmol_c\;kg^{-1}$. The content of organic matter, exchangeable potassium, exchangeable calcium and exchangeable magnesium was higher, while that of available phosphate was lower with slope degrees. And the content of major chemical components in carrot soil was lower in comparison with other crop soils. The average levels of N, $P_2O_5$, $K_2O$, livestock manure and lime fertilizer of 785 Belds applied by farmers were 335, 198, 244, 12,680 and $1,750kg\;ha^{-1}$, respectively, for summer vegetable crops in alpine area. The average amounts of $N-P_2O_5-K_2O$ fertilizers applied by farmers in 785 Gelds of vegetable crops were higher 1.7~2.0-4.2~7.0-1.4~2.0 times on potato, 1.4~1.6-4.6~8.3-3.5~4.2 times on Chinese cabbage, and 1.2~1.3-4.2~7.2-3.0~3.61 times on radish than the rates of NPK fertilizers based on soil testing for each crop.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.6
• /
• pp.329-333
• /
• 2006

Most of volcanic ash soils in South Korea are distributed in Jeju province which is an island placed on southern part of Korea and has steep slope mountain area. There are many soils containing high contents of organic matter (OM) derived from volcanic ash in Jejudo, also. Therefore, irrigation and drainage in volcanic ash soil different with general soil which has low OM content have to be applied with another management way, but studies searching appropriate methods for them are set on insufficient situation because the area of volcanic ash soil in South Korea is only 1.3% (130,000ha). This study was conducted for analysis of soil water content and irrigation quantity appropriate for crops cultivated in volcanic ash soil with high OM content. Although soils with different soil color have the same soil texture, soil water characteristics curve by soil color showed the difference of water retention capability by OM content. But, this characteristics classified with soil color could be unified by scaling technique with similitude analysis method which get dimensionless water content using a present water content, a residual water content and saturated water content (or water content at 10kPa). A relation of gravimetric soil water content (GSWC) and dimensionless water content by the results showed a form of power function. The dimensionless water content (DWC) express a relative saturation degree of present water content. This was also expressed by van Genuchten model which describe the relation between relative saturation degrees and matric potentials. These results on soil water characteristics curve (SWCC) of volcanic ash soil will be the basic of irrigation plan in area having high organic contents into soil.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.1
• /
• pp.182-195
• /
• 2011

Old big tree transcends the simple meaning of trees as they are the natural monuments that embody the people's history and culture of this land. The Cultural Heritage Administration of Korea (CHA) defines and protects old big tree based not only on the size of the tree but also on its definitive cultural and natural factors such as value, implications, and originality. This research aims to identify and analyze the habitation and measurements, the soil conditions, as well as the protective facilities of 14 old big tree spread throughout the Gangwondo. The research examined the soundness of the arboreal form, the degree of damage on the bark, as well as the quantity of leafs levels to evaluate the overall condition of growth and development. Then, the tree height, the eastwest and south-north width of the crown, the sternum circumference, and the root circumference were recorded to identify the measurements of the selected old big tree. Also, the research analyzed 9 elements such as soil texture, pH levels, and organic contents in order to determine the scientific characteristics of soil upon which the trees draw nutrition. Finally, the research evaluated supporting pillars, lightning rods, iron pulling-facilities, as well as notice boards to study the protective facilities of old big tree. The research procedures revealed that 78.57% of the old big tree identified as natural monuments in the Gangwondo have average to above average habitation conditions. Also, the average tree height reaches 18.80m above ground while the average root circumference measures 7.34m. Moreover, the results of the scientific analyses conducted on the soil elements determined that most chemical values were within the defined levels, with the exception of phosphoric acid levels falling within the hyper-nutritious range. Finally, although most of the protective facilities did support the habitation of the Old big tree, there were some supporting pillars and iron pulling-facilities that actually damaged the trees. This research means to provide foundational reference data for the analysis of the habitation and management conditions of natural monument old big tree within the Gangwondo. A follow-up topic led by the results of this research is the identification and analysis of correlating environmental elements that affect the habitation of the old big tree.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.4
• /
• pp.94-104
• /
• 2018

This study examined photogrammetric reconstruction techniques that can measure the original form of a cultural property utilizing photographs taken in the past. During the research process, photographs taken in the past as well as photograph on the internet of Soswaewon Garden in Damyang(scenic site 40) were collected and utilized. The landscaping structures of Maedae, Aiyangdan, Ogokmun Wall, and Yakjak and natural scenery Gwangseok, of which photographs can be taken from any 360 degree direction from a close distance or a far distance without any barriers in the way, were selected and tested for the possibility of reproducing three-dimensional shapes. The photography method of 151 landscape photographs (58.6%) from internet portal sites for the aforementioned five landscape subjects containing information on the date the photograph was taken, focal length, and exposure were analyzed. As a result of the analysis, it was revealed that the majority of the photographs tend to focus on important parts of each subject. In addition, we discovered that there are two or three photography methods that internet users preferred in regards to each landscape subject. For the purposes of the experiment, photographs in which a single scene consistently appears for each landscape subject and it was determined that there was a high level of preference related to the photography method were analyzed, and three-dimensional mesh shape model was produced with a photoscan program to analyze the reproducibility of three-dimensional shapes. Based on the results of the reproduction, it was relatively possible to reproduce three-dimensional shapes for artifacts such as Ogukmun wall, Maedae, and Aeyangdan, but it was impossible to reproduce three-dimensional images for natural scenery or an object that has similar texture such as Yakjak and Gwangseok. As a result of experimentation related to the reconstruction of three-dimensional shapes with the photographs taken on site using a photography method similar to that of the photographs selected as previously mentioned, there was success related to reproducing the three-dimensional shapes of Yakjak and Gwangseok, of which it was not possible to do so through the photographs that had been collected previously. In addition, through comparison of past and present images, it was possible to measure the exact sizes as well as discover any changes that have taken place. If past photographs taken by tourists or landscape architects of cultural properties can be obtained, the three-dimensional shapes from a particular period of time can be reproduced. If this technology becomes widespread, it will increase the level of accuracy and reliability in regards to measuring the past shapes of cultural landscape properties and examining any changes to the properties.

• Journal of Applied Biological Chemistry
• /
• v.62 no.1
• /
• pp.25-30
• /
• 2019

This study investigated the quality changes in whole super sweet corn during thermal processing to extend its shelf-life. To minimize the reduction of unique texture of whole sweet corn after the sterilization, the alcohol sanitation applied and the cold point of a whole corn ear was determined using a computer simulation. The cold point was located between the corn kernel and the cob. The microorganisms on the surface of sweet corn were reduced by more than 1 log CFU/g after alcohol sanitation, then the whole corn was treated to satisfy the degree of sterilization ($F_{121.1}=4$). The quality of sterilized sweet corn was compared with the control that was treated with steaming. The quality changes of sterilized sweet corn during storage were monitored for 9 months at $25^{\circ}C$. The hardness was maintained within 30% of its initial value. The minimum of hardness was $464.50{\pm}103.35g$ and maximum of hardness was $514.50{\pm}81.83g$. The differences in the sugar content among the samples were found, but the sugar content of corn kernel remained within 30% of the control, ranging from $28.83{\pm}1.05$ to $34.36{\pm}0.42%$. The yellowness was higher than that of control by 5%. The maximum value of yellowness was $34.36{\pm}0.42$. The general bacteria and molds and yeasts in corn kernel stored at $25^{\circ}C$ were not detected after 9 months of storage at $25^{\circ}C$. Therefore, in this study, we have demonstrated that the thermal sterilized method extends the shelf-life of whole sweet corn with minimizing its quality changes over 6 months in room temperature.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.3
• /
• pp.172-179
• /
• 2022

Sweet potato varieties with high fiber content in the storage root have poor texture when steamed or roasted. This study investigates the difference in fiber content among sweet potato varieties by soil and climate. The average fiber content of 'Hogammi', 'Sodammi', 'Pungwonmi', 'Danjami', and 'Jinyulmi' cultivars from the samples collected at farms in Haenam, Muan, and Unbong, Korea were 95.71, 66.73, 44.55, 40.55, and 38.53 mg/100g FW, respectively. There was no significant difference between site-specific conditions and varieties. Based on the degree of visual fibrousness, 'Hogammi' has an average of 3.6-4.0 with many thick stringy fibers. The fiber content of the 'Hogammi' cultivar was measured across 19 sites representing the main sweet potato growing regions of Korea. The fiber content was between 115.82 and 114.6 mg/100g in Haenam 2 and Boryeong 1, and 87.46 mg/100g in Hamyang. However, the fiber content at the remaining 16 sites was within the range of 94.63-108.52 mg/100g, although there were some site-level differences. The fiber content of the sweet potato storage roots were positively correlated with soil phosphorus (R² = 0.58^**), organic matter (R² = 0.52^*), and pH (R² = 0.51^*), which had a significance of 1% and 5%. The fiber content of sweet potato storage roots was found to have increased with increasing phosphorus content, organic matter and pH in the soil. However, there was no correlation with the amount of precipitation, days of precipitation and hours of sunshine with the fiber content of sweet potato at the selected sites.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.3
• /
• pp.273-291
• /
• 2020

The strength characteristics of the three orthogonal splitting planes, known as rift, grain and hardway planes in granite quarries, were examined. R, G and H specimens were obtained from the block samples of Jurassic granites in Geochang and Hapcheon areas. The directions of the long axes of these three specimens are perpendicular to each of the three planes. First, The chart, showing the scaling characteristics of three graphs related to the uniaxial compressive strengths of R, G and H specimens, were made. The graphs for the three specimens, along with the increase of strength, are arranged in the order of H < G < R. The angles of inclination of the graphs for the three specimens, suggesting the degree of uniformity of the texture within the specimen, were compared. The above angles for H specimens(θ^H, 24.0°~37.3°) are the lowest among the three specimens. Second, the scaling characteristics related to the three graphs of RG, GH and RH specimens, representing a combination of the mean compressive strengths of the two specimens, were derived. These three graphs, taking the various N-shaped forms, are arranged in the order of GH < RH < RG. Third, the correlation chart between the strength difference(Δσ_t) and the angle of inclination(θ) was made. The above two parameters show the correlation of the exponential function with an exponent(λ) of -0.003. In both granites, the angle of inclination(θ^RH) of the RH-graph is the lowest. Fourth, the six types of charts, showing the correlations among the three kinds of compressive strengths for the three specimens and the five parameters for the two sets of microcracks aligned parallel to the compressive load applied to each specimen, were made. From these charts for Geochang and Hapcheon granites, the mean value(0.877) of the correlation coefficients(R²) for total density(Lt), along with the frequency(N, 0.872) and density(ρ, 0.874), is the highest. In addition, the mean values(0.829) of correlation coefficients associated with the mean compressive strengths are more higher than the minimum(0.768) and maximum(0.804) compression strengths of three specimens. Fifth, the distributional characteristics of the Brazilian tensile strengths measured in directions parallel to the above two sets of microcracks in the three specimens from Geochang granite were derived. From the related chart, the three graphs for these tensile strengths corresponding to the R, G and H specimens show an order of H(R1+G1) < G(R2+H1) < R(R1+G1). The order of arrangement of the three graphs for the tensile strengths and that for the compressive strengths are mutually consistent. Therefore, the compressive strengths of the three specimens are proportional to the three types of tensile strengths. Sixth, the values of correlation coefficients, among the three tensile strengths corresponding to each cumulative number(N=1~10) from the above three graphs and the five parameters corresponding to each graph, were derived. The mean values of correlation coefficients for each parameter from the 10 correlation charts increase in the order of density(0.763) < total length(0.817) < frequency(0.839) < mean length(Lm, 0.901) ≤ median length(Lmed, 0.903). Seventh, the correlation charts among the compressive strengths and tensile strengths for the three specimens were made. The above correlation charts were divided into nine types based on the three kinds of compressive strengths and the five groups(A~E) of tensile strengths. From the related charts, as the tensile strength increases with the mean and maximum compressive strengths excluding the minimum compressive strength, the value of correlation coefficient increases rapidly.