• Carbon letters
• /
• 제8권2호
• /
• pp.134-136
• /
• 2007

In this work, activated carbons (ACs) were prepared from polystyrene-based cation-exchangeable resin (PSI) by a chemical activation with KOH as an activating agent. The surface morphologies were observed by using SEM, and the textural properties were investigated by using nitrogen adsorption at 77 K. From the experimental results, it was found that the well-developed micro- and mesopores were produced by a chemical activation, and the textural properties including specific surface areas and pore volumes were greatly enhanced. The electrochemical behaviors of the ACs showed similar phenomena with that of textural properties. These results indicated that KOH activation played an important role in the changes of surface, and pore structures, resulting in enhancing the electrochemical properties of the ACs prepared in present work.

• 한국식품조리과학회지
• /
• 제21권6호통권90호
• /
• pp.942-949
• /
• 2005

쌀전분겔의 매트릭스와 구조를 안정화하고 텍스쳐 특성을 개선하기 위하여 멥쌀전분에 다양한 검물질을 혼합하여 겔을 제조하여 형태적, 텍스쳐 특성, 냉동-해동 안정성을 비교하였다. 검물질을 첨가하면 종류에 따라 다르나 쌀전분겔을 조밀하고 균일하여 안정된 매트릭스 갖게 할 수 있었으며 겔란검과 알긴이 효과적이었다. 쌀전분/검질 혼합 겔의 텍스쳐 특성도 검질에 따라 달랐으며 겔란검은 단단하고 알긴은 부드러운 겔을 형성하였다. X-선 회절도에 의하면 쌀전분겔은 V형의 결정형을 나타내며 검을 첨가하였을 때 $2\theta$ = $20^{o}$의 피크가 낮아졌다. 냉동-해동 안정성도 검물질을 혼합하였을 때 증가하였으며 겔란검과 알긴을 첨가한 쌀전분겔이 바람직 하였다.

• 마이크로전자및패키징학회지
• /
• 제27권4호
• /
• pp.135-141
• /
• 2020

실리카-벤젠 에어로겔은 균일하고 정렬된 네트워크 기공 구조, 개선된 기계적 특성을 갖도록 합성되었다. 실리카 에어로겔의 기계적 특성을 향상시키기 위해 유기물을 첨가하는 것이 일반적인 방법이지만, 기공 특성이 유-무기 상분리 현상으로 인해 감소한다. 본 연구에서는 실리카 기반 에어로겔의 기공 특성을 유지하면서 동시에 기계적 물성을 높이기 위해 간단하고 저렴한 방법을 사용하였다. 기공 및 기계적 특성에 대한 하이드록실 결합수의 영향을 연구하기 위해 두 가지 유형의 벤젠 브리지 전구체를 사용하였다. 다공성 실리카 에어로겔은 간단하고 비용-효율적이며 무공해인 졸-겔방법으로 제조되었다. 최종적으로 제조된 실리카-벤젠 에어로겔은 추가적인 silylating reagents없이 우수한 기공 특성, 높은 비 표면적(1,326 ㎡/g), 다공성 구조 및 소수성(>140°)을 가졌다. 일부 샘플(2T4)의 경우 기계적 강도는 순수 실리카 에어로겔의 5 배 이상을 보였다.

• Preventive Nutrition and Food Science
• /
• 제11권2호
• /
• pp.160-165
• /
• 2006

This study intends to present basic materials for the development and production of functional dumpling skins by making rice flour-added functional dumpling skins and analyzing the nature of its quality. The moisture content of dumpling skins increased with high addition of rice flour. The color value of dumpling skins changed little with high addition of rice flour. The hardness of dumpling skins showed significant difference in all storage periods with the addition of rice flour. For the sensory properties of dumpling skins with the addition of rice flour, where 25% and 50% rice-flour were added, dumpling skins showed a high score in overall quality for O-day and 7-days of storage. In particular, the 50% rice-flour dumpling skin mixture indicated the highest score. For the correlation between textural and sensory properties according to the addition of rice flour, 0 day-stored dumpling skins showed a positive correlation between smoothness and moistness in the mouth feel and the overall quality (p<0.01) in the sensory properties. Wheat odor (r=0.68) and chewiness (r=0.65) also correlated positively with overall quality (p<0.05). Hardness in textural properties correlated positively with moistness (r=0.69) and the mouth feel (r=0.65) of dumpling skins (p<0.05). Hardness in textural properties correlated positively with adhesiveness (r=0.99) and chewiness (r=0.93, p<0.01). Dumpling skins stored for 7 days showed a positive correlation between hardness, chewiness, and moistness in the mouth feel and overall quality (p<0.05) in the sensory properties. Hardness in textural properties correlated positively with gumminess (r=0.65, p<0.05).

• 한국식품과학회지
• /
• 제7권3호
• /
• pp.168-180
• /
• 1975

Analogs and extenders should have mouthfeel and chewing characteristics that are similar to the food they are replacing or extending. Instrumental methods can measure some of the physical properties that constitute 'texture' but only sensory methods can provide a complete description and quantification of the textural properties of a food. Instrumental methods and sensory methods for measuring texture are reviewed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.159.2-159.2
• /
• 2011

In this study, we prepared the activated graphite nanofibers (A-GNFs) via chemical activation with KOH reagent. The effect of A-GNFs on the surface and textural properties of Ni-loaded graphite nanofibers (Ni/GNFs) was investigated by X-ray diffraction (XRD), transmission electron microscope (TEM), and Brunauer-Emmett-Teller (BET). The textural properties of samples were investigated by $N_2$/77K adsorption isotherms. The electrochemical performances were investigated by cyclic voltammetry. As a results, the electrochemical performances of Ni/GNFs were improved with usage of A-GNFs. This could be interpreted by the high specific surface area and large total pore volume of the A-GNFs.

• 한국가정과학회지
• /
• 제5권2호
• /
• pp.33-43
• /
• 2002

This study was investigated textural properties of Injulmi affected by milling methods, varieties and added water volume. Sinsunchalbyeo and Hwasunchalbyeo flours were made using Rin-dry milling(PDM) and roll-wet milling(RWM) methods. The proximate composition of waxy rice starches and waxy rice flours were similar. Water binding capacity, soluble carbohydrate and damaged starch of waxy rice flour by RWM: were higher than those of waxy rice flours by PDM. By increasing added water volume, hardness and adhesiveness of Injulmi were decreased. By increasing storage time, hardness of Injulmi was increased, but adhesiveness was decreased. The hardness of Injulmi made from waxy rice flours by PDM was higher than by RDW.

• 한국식품영양과학회지
• /
• 제24권4호
• /
• pp.594-600
• /
• 1995

To efficiently utilize not only fresh chestnut(FC) but also wormy chestnut(WC), four types of chestnut starches which were fresh chestnut starch(FCS), fresh chestnut crude starch(FCCS), wormy crude starch(WCS) and wormy chestnut crude starch(WCCS) were extracted. Amylose content of FCS(46.5%) and water binding capacity of FCCS(103.0%) were higher than those of othe three, respectively. Swelling powers of all sample starches increased rapidly from 6$0^{\circ}C$ to 8$0^{\circ}C$. Solubilities showed the same pattern as the swelling powers. In the textural properteis investigated with IUTM(instron universal testing machine), hardnesses and elasticties of chestnut starches were 50~58I.U. and 14~16I.U., respectively. The results of textural evaluations showed that it was possible to prepare chestnut mook with FCS, FCCS and WCS.

• Food Science and Biotechnology
• /
• 제16권5호
• /
• pp.789-795
• /
• 2007

This study was undertaken to investigate the producibility of processed foods utilizing 6 newly developed non-glutinous rice cultivars. First, cooked rice, cake, cookies, bread, and slender rice cake sticks were prepared with the newly developed cultivars; then their physicochemical and textural properties were evaluated. The rice samples had similar pasting temperatures and peak times, but different viscosities and other pasting properties. The textural analysis results suggested that 'Chucheong' was appropriate for cooked rice due to its low amylose content; hardness, and springiness; 'Ilphumbyeo' for rice cakes due to its high amylose content, moderate cohesiveness and adhesiveness, and low hardness; 'Ilphumbyeo' for cookies due to its high amount of protein, and low cohesiveness and adhesiveness; 'Ilphumbyeo' for bread due to its high amylose content, moderate hardness, and low consistency; and 'Ilphumbyeo' for the slender rice cake sticks due to its low hardness, moderate breakdown, paste viscosity, and setback.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권4호
• /
• pp.538-542
• /
• 2004

Comminuted sausages with reduced fat (25-0%) and increased moisture (19-44%) combinations were manufactured, and their chemical composition, and physico-chemical, textural and sensory properties were determined for the selection of the most palatable sausage treatment. The moisture and fat contents of the comminuted sausages varied from 55-79% and 26.4-2.14%, respectively, whereas, the protein content was relatively constant at 13.5-14.5%. Expressible moisture (EM, %) decreased with increased fat addition, and the high-fat control sausage (~25% fat) had lower EM than those with lower than 15% fat addition. Increased fat level also increased Hunter L values (lightness) of sausage samples taken from the core, and differences in lightness were observed between 15 and 25% fat level at the initial mixture. Sausages without fat addition had different textural characteristics from high-fat control sausages in most texture profile analysis (TPA) values. However, no differences in TPA values were observed among treatments with added fat (<25%) in the formulation. Results of the sensory evaluation showed that the most appropriate fat content of comminuted sausages to have better sensory properties ranged from 15-20% of added fat at the initial mixture. These results also indicated that decreased fat and increased moisture contents produce sausages with higher EM and lower lightness. Comminuted sausages without fat addition had different textural characteristics from the high-fat control.