• Advances in environmental research
• /
• v.1 no.2
• /
• pp.153-166
• /
• 2012

Decolourization potential of white rot fungal organism, coriolus versicolor, was investigated in a batch reactor, for textile dye industry wastewater. The influence of process parameters like pH, temperature, agitation speed and dye wastewater concentration on the decolourization of textile dye wastewater was examined by using Response surface methodology (RSM). The maximum decolourization was attained at: pH- 6.8, temperature - $27.9^{\circ}C$, agitation speed - 160 rpm and dye wastewater concentration - 1:2. From the analysis of variance (ANOVA) results it was found that, the linear effect of agitation speed and dye wastewater concentration were significant for the decolourization of textile dye wastewater. At these optimized condition, the maximum decolourization and chemical oxygen demand (COD) reduction was found to be 64.4% and 79.8% respectively. Various external carbon sources were tried to enhance the decolourization of textile dye wastewater. It was observed that the addition of carbon source enhances the decolourization of textile dye wastewater. Kinetics of textile dye degradation process was studied by first order and diffusional model. From the results it was found that the degradation follows first order model with $R^2$ value of 0.9430.

• Textile Coloration and Finishing
• /
• v.29 no.4
• /
• pp.223-230
• /
• 2017

Three super hydrophobic fluorescence dyes were selected to dye high molecular weight polyethylene fiber and their molar absorptivity, emission spectrum, and quantum yield were measured. From the results of color strength on the fiber, all the three dyes exhibited linear increase according to the dye concentration and Fluoro3 dye showed the highest color strength among them. Emission strength of the fluorescence dyes on the fiber was investigated according to the dye concentrations. The emission was increased with the increase of the dye concentration at relatively low dye concentration and then after showing the maximum emission strength the emission was decreased at higher dye concentrations. The highest emission was obtained in Fluoro2 dye. Color fastness to washing and rubbing was generally good enough, however, especially to light, only Fluoro3 dye exhibited rating 3 acceptable practically and Fluoro1 and 2 was ratings 1 which is unacceptable level.

• Textile Coloration and Finishing
• /
• v.8 no.3
• /
• pp.24-30
• /
• 1996

In order to investigate the light fastness of amino azo disperse dyes, some kinds of disperse dyes were prepared and dyed to polyester fabric under the different conditions, such as single or mixture state. After the dyed fabric was irradiated with carbon arc light for several hours, the color differences and K/S values of fabric were measured. The light fastness of amino azo disperse dye was decreased by the introduction of OH group to the dye molecule. But when the amino azo dye was mixed with the anthraquinone disperse dye, the light fastness was increased. It was considered that the dye molecules were aggregated on account of hydrogen bonding via OH groups, resulting the decrease of surface area of dye molecule which might be irradiated by the light.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.169-181
• /
• 2021

Five dyes based on phthalocyanine, a dye on azo, and a dye on anhraquinone were prepared from corresponding starting material to investigate the effects of substituent on thermal-stability of dyes which is essentially required to apply to the color filters. Synthesized dyes were confirmed their chemical structure using by 1H-NMR, MASS and Elemental analysis. The thermal-stability was evaluated by the weight reductions measured by TGA analysis comparing to that of conventional C.I. Pigment Blue 15:6. The absorption maxima were measured by UV-VIS spectrophotometer then the effects of substituent on absorption maximum was also investigated.

• Fashion & Textile Research Journal
• /
• v.3 no.2
• /
• pp.168-173
• /
• 2001

In order to overcome the disadvantage of the conventional two bath dyeing method of wool/cotton blends, it had prompted significant effort to the development of the one bath dyeing method which can accomplish savings in energy, water usage and time. To improve the dyeability of cotton toward direct dyes in a non-electrolytic and acidic dyebath, cotton component was pretreated with cationizing agent containing chlorohydrine group in aqueous solution of sodium hydroxide. This study was carried out to investigate almost equal color strength between wool component and cationized cotton component when wool/cationized cotton blends was dyed with acid dye/direct dye by the one bath two step method in a non-electrolytic and acidic dyebath.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.6 no.1
• /
• pp.27-31
• /
• 2003

Infectious flacherie of silkworm Bombyx mori is caused by B. mori infectious flacherie virus (BmIFV) and causes severe crop loss to sericulturists. In the present study, a colloidal textile dye-based dipstick immunoassay is developed for the detection of infectious flacherie in silkworms. Colloidal textile dye (blue D2R) with Aλ$_{max}$ at 620 nm was sensitised with 500 $\mu\textrm{g}$/ml of purified anti-BmIFV IgG. The dye-antibody reagent detects purified antigen up to 10 ng/ml and BmIFV infection in diseased larval extracts $(up to a dilution of {10^-5})$ and faecal matter extracts $(up to a dilution of {10^-2})$ by forming clear blue dot within 30 min. It was observed to be stable for three months period at $4^{\circ}C$. The efficacy of textile dye-based dipstick immunoassay was on pay with HRP-based dipstick immunoassay and fluorescent antibody test, and better than latex agglutination and ouchterlony tests in the detection of BmIFV The dye-based dipstick immunoassay method provides a simple, sensitive and less expensive test for the detection of BmIFV infection in silkworms.s.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.175-182
• /
• 2016

To investigate dyeing behaviors in accordance with dye structure in cold pad batch dyeing of cotton knit, monochlorotriazine-vinylsulfone bifunctional dyes and monofluorotriazine-vinylsulfone bifunctional dyes were prepared. The spectral property and solubility of the dyes were tested and compared with the imported dyes. In addition, exhaustion behaviors of individual and mixed dye solutions were measured to examine the influence of dye structure on dyeing behavior in cold pad batch dyeing. The substantivity, fixation, migration index and half dyeing time were also calculated for further analysis of dyeing behavior of the prepared dyes. As a result, both dyes exhibited the superior solubilities and satisfactory light absorption properties. Also, monofluorotriazine-vinylsulfone bifunctional dyes showed moderate sensitivity to alkalinity and proper kinetic index values compared with the monochlorotriazine-vinylsulfone bifunctional dyes and the imported dyes. The results indicated monofluorotriazine-vinylsulfone bifunctional structure of the dye is suitable for cold pad batch dyeing.

• Fashion & Textile Research Journal
• /
• v.10 no.6
• /
• pp.822-826
• /
• 2008

The data for application of mordanting is shown in this experiment by researching dying properties of iron-dye process and concentration changes using persimmon. The strength of persimmon-dying fabrics was controlled by diluting persimmon dye with water and iron mordanting showed the possibility of textile design. The experiments were performed with various conditions processed with iron mordanting liquid by adding water to persimmon-dying liquid and drying well. The most dark color of fabric is observed with the pure persimmon dying without adding water. As the adding water is increased, the color of the fabric is getting lighter with the amount of adding water. After process of iron mordanting, dark color of the fabric turns into dark grey and light color turns into light grey. The possibility of persimmon dying with fabric can be applied in the design of textile with deepened color.

• Textile Coloration and Finishing
• /
• v.27 no.1
• /
• pp.27-34
• /
• 2015

Novel super hydrophobic disazo red dyes were synthesized to improve light fastness of the primary monoazo red dye of previous study on polyolefin fibers such as polypropylene and ultra high molecular weight polyethylene fibers. 4-Alkylanilines were diazotized and then coupled to 2,5-dimethylaniline to produce dye intermediates which were then further used to synthesize final disazo red dyes by diazoization and coupling to ${\beta}$-naphthol. Considering both affinity of the dyes toward both polyolefin fibers and color fastnesses, the decyl-substituted dye was determined as the optimum dye. The decyl-substituted disazo red dye exhibited good dyeability on both polyolefin fibes and almost the same color values as the previous primary monoazo red dye. Light fastness on ultra high molecular weight polyethylene fibers was improved up to rating 3~4 compared to rating 2~3 of the previous primary monoazo red dye.

• Textile Coloration and Finishing
• /
• v.19 no.6
• /
• pp.35-38
• /
• 2007

FTriphenylamine dye compound having diheteryl moiety was synthesized and its photoluminescent property was investigated. Organic luminescent materials have received great attentions due to potential application subjects onto full color image displays. In this context, the dye (III) for light emitting materials was synthesized using 2-(4-amino-2-hydroxyphenyl)benzoxazole (I) and 4,4'-diformyltriphenylamine (II). It is well known that the amino groups of compound (I) react with carbonyl groups, especially an aldehyde, to afford azomethine linkages. The dye shows bulish-green fluorescence property, which is anticipated for the light-emitting material for display devices. In this context, our aim is to synthesize diheteryl-substituted triphenylamine fluorescent dye as an emitting material. The spectroscopic characteristics and the fluorescent properties of this dye molecule were examined and determined.